diff --git a/files/initrd/opt/rr/lang/zh_TW/LC_MESSAGES/rr.po b/files/initrd/opt/rr/lang/zh_TW/LC_MESSAGES/rr.po
index a8235acd..0d546422 100644
--- a/files/initrd/opt/rr/lang/zh_TW/LC_MESSAGES/rr.po
+++ b/files/initrd/opt/rr/lang/zh_TW/LC_MESSAGES/rr.po
@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: RR\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-06 01:44+0800\n"
-"PO-Revision-Date: 2024-03-06 01:52+0800\n"
+"POT-Creation-Date: 2024-02-18 21:57+0800\n"
+"PO-Revision-Date: 2024-03-06 18:12+0800\n"
 "Last-Translator: March Fun <https://cyber.suma.tw/>\n"
 "Language-Team: Chinese (Taiwan) <https://cyber.suma.tw/>\n"
 "Language: zh_TW\n"
@@ -34,9 +34,7 @@ msgid "DSM zImage changed"
 msgstr "DSM zImage 已變更"
 
 #: boot.sh:36 menu.sh:1236
-msgid ""
-"zImage not patched,\\nPlease upgrade the bootloader version and try again."
-"\\nPatch error:\\n"
+msgid "zImage not patched,\\nPlease upgrade the bootloader version and try again.\\nPatch error:\\n"
 msgstr "zImage 未修補，\\n請升級開機載入程式版本然後重試。\\n修補錯誤:\\n"
 
 #: boot.sh:44
@@ -44,9 +42,7 @@ msgid "DSM Ramdisk changed"
 msgstr "DSM Ramdisk 已變更"
 
 #: boot.sh:47 menu.sh:1242
-msgid ""
-"Ramdisk not patched,\\nPlease upgrade the bootloader version and try again."
-"\\nPatch error:\\n"
+msgid "Ramdisk not patched,\\nPlease upgrade the bootloader version and try again.\\nPatch error:\\n"
 msgstr "Ramdisk 未修補，\\n請升級開機載入程式版本然後重試。\\n修補錯誤:\\n"
 
 #: boot.sh:65
@@ -78,15 +74,11 @@ msgid "MEM:     "
 msgstr "MEM:     "
 
 #: boot.sh:74
-msgid ""
-"The current version of bootloader does not support booting %s-%s, please "
-"upgrade and rebuild."
+msgid "The current version of bootloader does not support booting %s-%s, please upgrade and rebuild."
 msgstr "目前版本的開機載入程式不支援啟動 %s-%s，請升級並重建。"
 
 #: boot.sh:86
-msgid ""
-"Please insert at least one sata/scsi disk for system installation, except "
-"for the bootloader disk."
+msgid "Please insert at least one sata/scsi disk for system installation, except for the bootloader disk."
 msgstr "除了開機碟之外，請至少插入一個 sata/scsi 磁碟以進行系統安裝。"
 
 #: boot.sh:169
@@ -146,12 +138,8 @@ msgid "Booting ..."
 msgstr "開機中..."
 
 #: boot.sh:272
-msgid ""
-"[This interface will not be operational. Please wait a few minutes.\\nFind "
-"DSM via http://find.synology.com/ or Synology Assistant and connect.]"
-msgstr ""
-"[該介面已無法操作。請於數分鐘後透過\\n http://find.synology.com/ 或者 "
-"Synology Assistant 搜尋 DSM 並連線。]"
+msgid "[This interface will not be operational. Please wait a few minutes.\\nFind DSM via http://find.synology.com/ or Synology Assistant and connect.]"
+msgstr "[該介面已無法操作。請於數分鐘後透過\\n http://find.synology.com/ 或者 Synology Assistant 搜尋 DSM 並連線。]"
 
 #: init.sh:23
 msgid "Network devices not found!"
@@ -178,11 +166,8 @@ msgid "Waiting IP."
 msgstr "正在取得 IP。"
 
 #: init.sh:162
-msgid ""
-"Access \\033[1;34mhttp://%s:7681\\033[0m to configure the loader via web "
-"terminal."
-msgstr ""
-"在瀏覽器中瀏覽 \\033[1;34mhttp://%s:7681\\033[0m 進入 WEB 終端進行設置。"
+msgid "Access \\033[1;34mhttp://%s:7681\\033[0m to configure the loader via web terminal."
+msgstr "在瀏覽器中瀏覽 \\033[1;34mhttp://%s:7681\\033[0m 進入 WEB 終端進行設置。"
 
 #: init.sh:172
 msgid "Call \\033[1;32mmenu.sh\\033[0m to configure loader"
@@ -209,9 +194,7 @@ msgid "Default SSH Root password is"
 msgstr "預設 SSH 的 root 密碼為"
 
 #: init.sh:196
-msgid ""
-"You have less than 4GB of RAM, if errors occur in loader creation, please "
-"increase the amount of memory."
+msgid "You have less than 4GB of RAM, if errors occur in loader creation, please increase the amount of memory."
 msgstr "您的記憶體不足 4GB，如果在建立開機檔時出現錯誤，請增加記憶體。"
 
 #: menu.sh:102 menu.sh:136 menu.sh:179
@@ -248,14 +231,11 @@ msgid "Choose a product version"
 msgstr "選擇產品版本"
 
 #: menu.sh:242
-msgid ""
-"The current version has been set to %s. Do you want to reset the version?"
+msgid "The current version has been set to %s. Do you want to reset the version?"
 msgstr "目前版本已設定為 %s。是否要重設版本？"
 
 #: menu.sh:248
-msgid ""
-"This version does not support UEFI startup, Please select another version or "
-"switch the startup mode."
+msgid "This version does not support UEFI startup, Please select another version or switch the startup mode."
 msgstr "該版本不支援 UEFI 開機，請選擇其他版本或者切換開機模式。"
 
 #: menu.sh:259
@@ -263,9 +243,7 @@ msgid "Get pat data ..."
 msgstr "取得 pat 資料..."
 
 #: menu.sh:278
-msgid ""
-"Failed to get pat data,\\nPlease manually fill in the URL and md5sum of the "
-"corresponding version of pat."
+msgid "Failed to get pat data,\\nPlease manually fill in the URL and md5sum of the corresponding version of pat."
 msgstr "取得 pat 資料失敗，\\n請手動填寫相對版本 pat 的 URL 和 MD5。"
 
 #: menu.sh:282
@@ -281,9 +259,7 @@ msgid "Reconfiguring Synoinfo, Addons and Modules"
 msgstr "重新設置 Syninfo、增益集和模組"
 
 #: menu.sh:339
-msgid ""
-"You have selected the %s and %s.\\n'Parse Pat' will overwrite the previous "
-"selection.\\nDo you want to continue?"
+msgid "You have selected the %s and %s.\\n'Parse Pat' will overwrite the previous selection.\\nDo you want to continue?"
 msgstr "您已選擇 %s 和 %s。\\n\"解析 Pat\" 將覆蓋之前的選擇。\\n是否要繼續 ?"
 
 #: menu.sh:340
@@ -295,11 +271,8 @@ msgid "No pat file found in users folder!\\n"
 msgstr "在使用者資料夾中找不到 pat 檔案 !\\n"
 
 #: menu.sh:349
-msgid ""
-"Please upload the pat file to /mnt/p3/users/ folder via DUFS and re-enter "
-"this option.\\n"
-msgstr ""
-"請透過 DUFS 將 pat 檔上傳到 /mnt/p3/users/ 資料夾，然後重新進入此選項。\\n"
+msgid "Please upload the pat file to /mnt/p3/users/ folder via DUFS and re-enter this option.\\n"
+msgstr "請透過 DUFS 將 pat 檔上傳到 /mnt/p3/users/ 資料夾，然後重新進入此選項。\\n"
 
 #: menu.sh:350 menu.sh:360 menu.sh:2593 menu.sh:2594 menu.sh:2595 menu.sh:2596
 #: menu.sh:2597 menu.sh:2598 menu.sh:2604 menu.sh:2627 menu.sh:2638
@@ -392,16 +365,11 @@ msgid "Select addon to remove"
 msgstr "選擇要删除的增益集"
 
 #: menu.sh:561
-msgid ""
-"Name with color \"\\Z4blue\\Zn\" have been added, with color \"black\" are "
-"not added.\\n\\n"
-msgstr ""
-"名稱色彩為 \"\\Z4藍色\\Zn\" 者為已加入，色彩為 \"黑色\" 者為未加入。\\n\\n"
+msgid "Name with color \"\\Z4blue\\Zn\" have been added, with color \"black\" are not added.\\n\\n"
+msgstr "名稱色彩為 \"\\Z4藍色\\Zn\" 者為已加入，色彩為 \"黑色\" 者為未加入。\\n\\n"
 
 #: menu.sh:576 menu.sh:710 menu.sh:1286 menu.sh:2672
-msgid ""
-"This feature is only available when accessed via ssh (Requires a terminal "
-"that supports ZModem protocol).\\n"
+msgid "This feature is only available when accessed via ssh (Requires a terminal that supports ZModem protocol).\\n"
 msgstr "此功能僅在透過 ssh 存取時可用。(需要支援 ZModem 協定的終端)。\\n"
 
 #: menu.sh:582
@@ -475,32 +443,20 @@ msgid "Selecting loaded modules"
 msgstr "選擇已識別的模組"
 
 #: menu.sh:716
-msgid ""
-"This function is experimental and dangerous. If you don't know much, please "
-"exit.\\n"
+msgid "This function is experimental and dangerous. If you don't know much, please exit.\\n"
 msgstr "該功能是實驗性質且具有風險，如果你不瞭解，請退出。\\n"
 
 #: menu.sh:717
-msgid ""
-"The imported .ko of this function will be implanted into the corresponding "
-"arch's modules package, which will affect all models of the arch.\\n"
+msgid "The imported .ko of this function will be implanted into the corresponding arch's modules package, which will affect all models of the arch.\\n"
 msgstr "該功能匯入 .ko 將植入相對架構的模組套件。這將影響該架構的所有型號。\\n"
 
 #: menu.sh:718
-msgid ""
-"This program will not determine the availability of imported modules or even "
-"make type judgments, as please double check if it is correct.\\n"
-msgstr ""
-"該程式不會判斷匯入的驅動模組的可用性，甚至不會做類型判斷，因此請再三確認是否"
-"正確。\\n"
+msgid "This program will not determine the availability of imported modules or even make type judgments, as please double check if it is correct.\\n"
+msgstr "該程式不會判斷匯入的驅動模組的可用性，甚至不會做類型判斷，因此請再三確認是否正確。\\n"
 
 #: menu.sh:719
-msgid ""
-"If you want to remove it, please go to the \"Update Menu\" -> \"Update "
-"modules\" to forcibly update the modules. All imports will be reset.\\n"
-msgstr ""
-"如果您想删除它，請前往「更新 -> 更新模組」強制更新模組。所有匯入都將被重"
-"設。\\n"
+msgid "If you want to remove it, please go to the \"Update Menu\" -> \"Update modules\" to forcibly update the modules. All imports will be reset.\\n"
+msgstr "如果您想删除它，請前往「更新 -> 更新模組」強制更新模組。所有匯入都將被重設。\\n"
 
 #: menu.sh:720
 msgid "Do you want to continue?"
@@ -552,24 +508,15 @@ msgid "Commonly used cmdlines:\\n"
 msgstr "常用的 cmdlines:\\n"
 
 #: menu.sh:814
-msgid ""
-" * \\Z4disable_mtrr_trim=\\Zn\\n    disables kernel trim any uncacheable "
-"memory out.\\n"
-msgstr ""
-" * \\Z4disable_mtrr_trim=\\Zn\\n    停用核心修剪任何不可快取的記憶體。\\n"
+msgid " * \\Z4disable_mtrr_trim=\\Zn\\n    disables kernel trim any uncacheable memory out.\\n"
+msgstr " * \\Z4disable_mtrr_trim=\\Zn\\n    停用核心修剪任何不可快取的記憶體。\\n"
 
 #: menu.sh:815
-msgid ""
-" * \\Z4intel_idle.max_cstate=1\\Zn\\n    Set the maximum C-state depth "
-"allowed by the intel_idle driver.\\n"
-msgstr ""
-" * \\Z4intel_idle.max_cstate=1\\Zn\\n   設定 intel_idle 驅動程式允許的最大 C-"
-"狀態 深度。\\n"
+msgid " * \\Z4intel_idle.max_cstate=1\\Zn\\n    Set the maximum C-state depth allowed by the intel_idle driver.\\n"
+msgstr " * \\Z4intel_idle.max_cstate=1\\Zn\\n   設定 intel_idle 驅動程式允許的最大 C-狀態 深度。\\n"
 
 #: menu.sh:816
-msgid ""
-" * \\Z4pcie_port_pm=off\\Zn\\n    Turn off the power management of the PCIe "
-"port.\\n"
+msgid " * \\Z4pcie_port_pm=off\\Zn\\n    Turn off the power management of the PCIe port.\\n"
 msgstr " * \\Z4pcie_port_pm=off\\Zn\\n    關閉 PCIe 埠的電源管理。\\n"
 
 #: menu.sh:817
@@ -581,25 +528,16 @@ msgid " * \\Z4SataPortMap=??\\Zn\\n    Sata Port Map.\\n"
 msgstr " * \\Z4SataPortMap=??\\Zn\\n    Sata 埠地圖。\\n"
 
 #: menu.sh:819
-msgid ""
-" * \\Z4DiskIdxMap=??\\Zn\\n    Disk Index Map, Modify disk name sequence.\\n"
+msgid " * \\Z4DiskIdxMap=??\\Zn\\n    Disk Index Map, Modify disk name sequence.\\n"
 msgstr " * \\Z4DiskIdxMap=??\\Zn\\n    磁碟索引地圖，修改磁碟名稱順序。\\n"
 
 #: menu.sh:820
-msgid ""
-" * \\Z4i915.enable_guc=2\\Zn\\n    Enable the GuC firmware on Intel graphics "
-"hardware.(value: 1,2 or 3)\\n"
-msgstr ""
-" * \\Z4i915.enable_guc=2\\Zn\\n    在 Intel 圖形硬體上啟用 GuC 韌體。(值：1、"
-"2 或 3)\\n"
+msgid " * \\Z4i915.enable_guc=2\\Zn\\n    Enable the GuC firmware on Intel graphics hardware.(value: 1,2 or 3)\\n"
+msgstr " * \\Z4i915.enable_guc=2\\Zn\\n    在 Intel 圖形硬體上啟用 GuC 韌體。(值：1、2 或 3)\\n"
 
 #: menu.sh:821
-msgid ""
-" * \\Z4i915.max_vfs=7\\Zn\\n     Set the maximum number of virtual functions "
-"(VFs) that can be created for Intel graphics hardware.\\n"
-msgstr ""
-" * \\Z4i915.max_vfs=7\\Zn\\n     設定 Intel 圖形硬體可以建立的最大虛擬功能  "
-"(VF) 數。\\n"
+msgid " * \\Z4i915.max_vfs=7\\Zn\\n     Set the maximum number of virtual functions (VFs) that can be created for Intel graphics hardware.\\n"
+msgstr " * \\Z4i915.max_vfs=7\\Zn\\n     設定 Intel 圖形硬體可以建立的最大虛擬功能  (VF) 數。\\n"
 
 #: menu.sh:822 menu.sh:953
 msgid "\\nEnter the parameter name and value you need to add.\\n"
@@ -690,9 +628,7 @@ msgid "Encrypted"
 msgstr "已加密"
 
 #: menu.sh:1087
-msgid ""
-"Could not determine if pat file is encrypted or not, maybe corrupted, try "
-"again!"
+msgid "Could not determine if pat file is encrypted or not, maybe corrupted, try again!"
 msgstr "無法確定 pat 檔案是否加密，可能已損壞，請重試！"
 
 #: menu.sh:1094 menu.sh:1186
@@ -716,8 +652,7 @@ msgid "Cleaning cache ..."
 msgstr "清除快取..."
 
 #: menu.sh:1154
-msgid ""
-"Based on the current network situation, switch to %s mirror to downloading."
+msgid "Based on the current network situation, switch to %s mirror to downloading."
 msgstr "根據目前的網路狀況，已切換到 %s 鏡像伺服器進行下載。"
 
 #: menu.sh:1157
@@ -729,9 +664,7 @@ msgid "Checking hash of %s: "
 msgstr "檢查 %s 的雜湊值: "
 
 #: menu.sh:1179
-msgid ""
-"md5 hash of pat not match, Please reget pat data from the version menu and "
-"try again!"
+msgid "md5 hash of pat not match, Please reget pat data from the version menu and try again!"
 msgstr "pat 的 md5 雜湊值不相符，請自版本功能表中重新取得 pat 資料並再試一次！"
 
 #: menu.sh:1182 menu.sh:1198 menu.sh:1208
@@ -780,18 +713,12 @@ msgid "Edit dts file"
 msgstr "編輯 dts 檔案"
 
 #: menu.sh:1287
-msgid ""
-"Or upload the dts file to %s via DUFS, Will be automatically imported when "
-"building."
+msgid "Or upload the dts file to %s via DUFS, Will be automatically imported when building."
 msgstr "或者透過 DUFS 將 dts 檔案上傳到 %s，建構時會自動匯入。"
 
 #: menu.sh:1293
-msgid ""
-"Currently, only dts format files are supported. Please prepare and click to "
-"confirm uploading.\\n(saved in /mnt/p3/users/)"
-msgstr ""
-"目前只支援 dts 格式的檔案，請準備並點選確認上傳。\\n(儲存於 /mnt/p3/users/ "
-"中)"
+msgid "Currently, only dts format files are supported. Please prepare and click to confirm uploading.\\n(saved in /mnt/p3/users/)"
+msgstr "目前只支援 dts 格式的檔案，請準備並點選確認上傳。\\n(儲存於 /mnt/p3/users/ 中)"
 
 #: menu.sh:1310 menu.sh:1346
 msgid "Not a valid dts file, please try again!"
@@ -968,9 +895,7 @@ msgid "\\nTotal of ports: %s\\n"
 msgstr "\\n埠總數: %s\\n"
 
 #: menu.sh:1663
-msgid ""
-"\\nPorts with color \\Z1red\\Zn as DUMMY, color \\Z2\\Zbgreen\\Zn has drive "
-"connected."
+msgid "\\nPorts with color \\Z1red\\Zn as DUMMY, color \\Z2\\Zbgreen\\Zn has drive connected."
 msgstr "\\n\\Z1紅色\\Zn 為空，\\Z2\\Zb綠色\\Zn 為已連接磁碟機。"
 
 #: menu.sh:1670
@@ -978,9 +903,7 @@ msgid "pat: (editable)"
 msgstr "pat: (可編輯)"
 
 #: menu.sh:1686
-msgid ""
-"This feature will allow you to downgrade the installation by removing the "
-"VERSION file from the first partition of all disks.\\n"
+msgid "This feature will allow you to downgrade the installation by removing the VERSION file from the first partition of all disks.\\n"
 msgstr "此功能透過删除所有磁碟第一個分區的 VERSION 檔案以允許你降級安裝。\\n"
 
 #: menu.sh:1687
@@ -988,9 +911,7 @@ msgid "Therefore, please insert all disks before continuing.\\n"
 msgstr "因此，請插入所有磁碟後再繼續。\\n"
 
 #: menu.sh:1688 menu.sh:1729
-msgid ""
-"Warning:\\nThis operation is irreversible. Please backup important data. Do "
-"you want to continue?"
+msgid "Warning:\\nThis operation is irreversible. Please backup important data. Do you want to continue?"
 msgstr "警告:\\n該作業不可逆，請提前備份重要資料。是否繼續？"
 
 #: menu.sh:1703
@@ -1006,8 +927,7 @@ msgid "No disk found!"
 msgstr "未找到磁碟！"
 
 #: menu.sh:1733
-msgid ""
-"Warning:\\nThe current hds is in raid, do you still want to format them?"
+msgid "Warning:\\nThe current hds is in raid, do you still want to format them?"
 msgstr "警告:\\n目前的硬碟使用 raid 中，是否仍要格式化？"
 
 #: menu.sh:1748
@@ -1059,14 +979,11 @@ msgid "Telnet&SSH is not enabled."
 msgstr "Telnet 及 SSH 未啟用。"
 
 #: menu.sh:1843
-msgid ""
-"Warning:\\nDo not terminate midway, otherwise it may cause damage to the RR. "
-"Do you want to continue?"
+msgid "Warning:\\nDo not terminate midway, otherwise it may cause damage to the RR. Do you want to continue?"
 msgstr "警告:\\n請不要中途停止，否則將導致 RR 開機損毀，是否繼續？"
 
 #: menu.sh:1846
-msgid ""
-"Saving ...\\n(It usually takes 5-10 minutes, please be patient and wait.)"
+msgid "Saving ...\\n(It usually takes 5-10 minutes, please be patient and wait.)"
 msgstr "儲存中...\\n(通常需要 5-10 分鐘，請耐心等候)。"
 
 #: menu.sh:1861
@@ -1102,27 +1019,19 @@ msgid "Disk %s size is less than 1GB and cannot be cloned!"
 msgstr "磁碟 %s 大小小於 1GB，無法複製！"
 
 #: menu.sh:1926
-msgid ""
-"Warning:\\nDisk %s will be formatted and written to the bootloader. Please "
-"confirm that important data has been backed up. \\nDo you want to continue?"
-msgstr ""
-"警告:\\n磁碟 %s 將被格式化並寫入開機程式。請確認重要資料已備份。\\n是否要繼"
-"續？"
+msgid "Warning:\\nDisk %s will be formatted and written to the bootloader. Please confirm that important data has been backed up. \\nDo you want to continue?"
+msgstr "警告:\\n磁碟 %s 將被格式化並寫入開機程式。請確認重要資料已備份。\\n是否要繼續？"
 
 #: menu.sh:1959
 msgid "Cloning ..."
 msgstr "複製中..."
 
 #: menu.sh:1961
-msgid ""
-"Bootloader has been cloned to disk %s, please remove the current bootloader "
-"disk!\\nReboot?"
+msgid "Bootloader has been cloned to disk %s, please remove the current bootloader disk!\\nReboot?"
 msgstr "開機程式已複製到磁碟 %s，請移除目前的開機磁碟！\\n重新啟動？"
 
 #: menu.sh:1972
-msgid ""
-"Please via %s to download the logs,\\nAnd go to github to create an issue "
-"and upload the logs."
+msgid "Please via %s to download the logs,\\nAnd go to github to create an issue and upload the logs."
 msgstr "請透過 %s 下載記錄，\\n並前往 github 建立問題並上傳記錄。"
 
 #: menu.sh:1976
@@ -1150,21 +1059,15 @@ msgid " 3. Reboot into RR and go to this option.\\n"
 msgstr " 3. 重新啟動進入 RR 並前往此選項。\\n"
 
 #: menu.sh:1991
-msgid ""
-"This option only installs opkg package management, allowing you to install "
-"more tools for use and debugging. Do you want to continue?"
-msgstr ""
-"該選項僅安裝 opkg 套件管理工具，讓你能?安裝更多的工具以供使用和除錯，是否繼"
-"續 ?"
+msgid "This option only installs opkg package management, allowing you to install more tools for use and debugging. Do you want to continue?"
+msgstr "該選項僅安裝 opkg 套件管理工具，讓你能?安裝更多的工具以供使用和除錯，是否繼續 ?"
 
 #: menu.sh:1998
 msgid "opkg installing ..."
 msgstr "opkg 安裝中..."
 
 #: menu.sh:2000
-msgid ""
-"opkg install is complete. Please reconnect to ssh/web, or execute 'source ~/."
-"bashrc'"
+msgid "opkg install is complete. Please reconnect to ssh/web, or execute 'source ~/.bashrc'"
 msgstr "opkg 安裝完成。請重新連線 ssh/web，或者執行「source ~/.bashrc」"
 
 #: menu.sh:2012
@@ -1184,9 +1087,7 @@ msgid "It is expected that all restrictions on DSM will be lifted,\\n"
 msgstr "預期可以去掉所有 DSM 的限制，\\n"
 
 #: menu.sh:2071
-msgid ""
-"But since upgrading is not supported, I don not want to implement it for the "
-"time being.\\n"
+msgid "But since upgrading is not supported, I don not want to implement it for the time being.\\n"
 msgstr "但是由於不支援升級，因此暫時不想實現它。\\n"
 
 #: menu.sh:2083 menu.sh:2118 menu.sh:2125
@@ -1248,7 +1149,7 @@ msgstr "沒有新版本。"
 
 #: menu.sh:2274
 msgid "Actual version is %s\\nForce update?"
-msgstr "實際版本為 %s\\n強制更新？"
+msgstr "實際版本為 %s\\n強制更新 ?"
 
 #: menu.sh:2296
 msgid "Downloading ..."
@@ -1264,20 +1165,18 @@ msgstr "RR"
 
 #: menu.sh:2318 menu.sh:2415 menu.sh:2460 menu.sh:2510 menu.sh:2549
 msgid "Extracting update file ..."
-msgstr "解壓縮更新檔 ..."
+msgstr "正在提取更新檔案..."
 
 #: menu.sh:2329 menu.sh:2426 menu.sh:2471 menu.sh:2521 menu.sh:2560
 msgid "Error extracting update file."
-msgstr "解壓縮更新檔錯誤."
+msgstr "提取更新檔時發生錯誤。"
 
 #: menu.sh:2341
 msgid "Checksum do not match!"
 msgstr "總和檢查碼不相符！"
 
 #: menu.sh:2355
-msgid ""
-"The current version does not support upgrading to the latest update.zip. "
-"Please remake the bootloader disk!"
+msgid "The current version does not support upgrading to the latest update.zip. Please remake the bootloader disk!"
 msgstr "目前版本不支援升級到最新的 update.zip。請重新製作開機程式磁碟！"
 
 #: menu.sh:2365
@@ -1290,7 +1189,7 @@ msgstr "%s 更新成功！"
 
 #: menu.sh:2401
 msgid "Reboot?"
-msgstr "重新開機?"
+msgstr "重新開機 ?"
 
 #: menu.sh:2509 menu.sh:2533 menu.sh:2597 menu.sh:2650 menu.sh:2654
 msgid "LKMs"
@@ -1313,21 +1212,15 @@ msgid "Pre Release:"
 msgstr "預發佈:"
 
 #: menu.sh:2605 menu.sh:2673
-msgid ""
-"Manually uploading update*.zip,addons*.zip,modules*.zip,rp-lkms*.zip,rr-cks*."
-"zip to /tmp/ will skip the download."
-msgstr ""
-"手動上傳 update*.zip,addons*.zip,modules*.zip,rp-lkms*.zip,rr-cks*.zip 到 /"
-"tmp/ 將跳過下載。"
+msgid "Manually uploading update*.zip,addons*.zip,modules*.zip,rp-lkms*.zip,rr-cks*.zip to /tmp/ will skip the download."
+msgstr "手動上傳 uploading update*.zip,addons*.zip,modules*.zip,rp-lkms*.zip,rr-cks*.zip 到 /tmp/ 將跳過下載。"
 
 #: menu.sh:2628 menu.sh:2639 menu.sh:2650 menu.sh:2661
 msgid "No longer supports update %s separately. Please choose to update All/RR"
-msgstr "不再支持單獨更新%s. 請選擇更新全部/RR"
+msgstr "不再支援單獨更新 %s。請選擇更新全部/RR"
 
 #: menu.sh:2679
-msgid ""
-"Please keep the attachment name consistent with the attachment name on "
-"Github.\\n"
+msgid "Please keep the attachment name consistent with the attachment name on Github.\\n"
 msgstr "請保持附件名稱與 Github 上的附件名稱一致。\\n"
 
 #: menu.sh:2680