From 99a667b5d3361756b9aa6230290838a410ea59fd Mon Sep 17 00:00:00 2001 From: marchfun1 <115027125+marchfun1@users.noreply.github.com> Date: Tue, 21 Nov 2023 10:24:33 +0800 Subject: [PATCH] Update zh_TW.po Update zh_TW --- files/initrd/opt/rr/lang/zh_TW.po | 197 ++++++++---------------------- 1 file changed, 54 insertions(+), 143 deletions(-) diff --git a/files/initrd/opt/rr/lang/zh_TW.po b/files/initrd/opt/rr/lang/zh_TW.po index 1a8b82c7..cbd978bf 100644 --- a/files/initrd/opt/rr/lang/zh_TW.po +++ b/files/initrd/opt/rr/lang/zh_TW.po @@ -7,8 +7,8 @@ msgid "" msgstr "" "Project-Id-Version: RR\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-11-20 18:01+0800\n" -"PO-Revision-Date: 2023-11-20 18:07+0800\n" +"POT-Creation-Date: 2023-10-31 14:19+0800\n" +"PO-Revision-Date: 2023-11-21 10:19+0800\n" "Last-Translator: March Fun \n" "Language-Team: Chinese (Taiwan) \n" "Language: zh_TW\n" @@ -34,9 +34,7 @@ msgid "DSM zImage changed" msgstr "DSM zImage 已變更" #: boot.sh:36 menu.sh:1000 -msgid "" -"zImage not patched,\\nPlease upgrade the bootloader version and try again." -"\\nPatch error:\\n" +msgid "zImage not patched,\\nPlease upgrade the bootloader version and try again.\\nPatch error:\\n" msgstr "zImage 未修補，\\n請升級開機載入程式版本然後重試。\\n修補錯誤:\\n" #: boot.sh:45 @@ -44,9 +42,7 @@ msgid "DSM Ramdisk changed" msgstr "DSM Ramdisk 已變更" #: boot.sh:48 menu.sh:1006 -msgid "" -"Ramdisk not patched,\\nPlease upgrade the bootloader version and try again." -"\\nPatch error:\\n" +msgid "Ramdisk not patched,\\nPlease upgrade the bootloader version and try again.\\nPatch error:\\n" msgstr "Ramdisk 未修補，\\n請升級開機載入程式版本然後重試。\\n修補錯誤:\\n" #: boot.sh:67 @@ -74,15 +70,11 @@ msgid "MEM: " msgstr "MEM: " #: boot.sh:75 -msgid "" -"The current version of bootloader does not support booting %s-%s, please " -"upgrade and rebuild." +msgid "The current version of bootloader does not support booting %s-%s, please upgrade and rebuild." msgstr "目前版本的開機載入程式不支援啟動 %s-%s，請升級並重建。" #: boot.sh:87 -msgid "" -"Please insert at least one sata/scsi disk for system installation, except " -"for the bootloader disk." +msgid "Please insert at least one sata/scsi disk for system installation, except for the bootloader disk." msgstr "除了開機碟之外，請至少插入一個 sata/scsi 磁碟以進行系統安裝。" #: boot.sh:152 @@ -142,12 +134,8 @@ msgid "Booting..." msgstr "開機中..." #: boot.sh:252 -msgid "" -"[This interface will not be operational. Please wait a few minutes.\\nFind " -"DSM via http://find.synology.com/ or Synology Assistant and connect.]" -msgstr "" -"[該介面已無法操作。請於數分鐘後透過\\n http://find.synology.com/ 或者 " -"Synology Assistant 搜尋 DSM 並連線。]" +msgid "[This interface will not be operational. Please wait a few minutes.\\nFind DSM via http://find.synology.com/ or Synology Assistant and connect.]" +msgstr "[該介面已無法操作。請於數分鐘後透過\\n http://find.synology.com/ 或者 Synology Assistant 搜尋 DSM 並連線。]" #: init.sh:23 msgid "Network devices not found!" @@ -174,11 +162,8 @@ msgid "Waiting IP." msgstr "正在取得 IP。" #: init.sh:159 -msgid "" -"Access \\033[1;34mhttp://%s:7681\\033[0m to configure the loader via web " -"terminal." -msgstr "" -"在瀏覽器中瀏覽 \\033[1;34mhttp://%s:7681\\033[0m 進入 WEB 終端進行設置。" +msgid "Access \\033[1;34mhttp://%s:7681\\033[0m to configure the loader via web terminal." +msgstr "在瀏覽器中瀏覽 \\033[1;34mhttp://%s:7681\\033[0m 進入 WEB 終端進行設置。" #: init.sh:169 msgid "Call \\033[1;32mmenu.sh\\033[0m to configure loader" @@ -193,9 +178,7 @@ msgid "Default SSH Root password is" msgstr "預設 SSH 的 root 密碼為" #: init.sh:186 -msgid "" -"You have less than 4GB of RAM, if errors occur in loader creation, please " -"increase the amount of memory." +msgid "You have less than 4GB of RAM, if errors occur in loader creation, please increase the amount of memory." msgstr "您的記憶體不足 4GB，如果在建立開機檔時出現錯誤，請增加記憶體。" #: menu.sh:93 menu.sh:127 menu.sh:170 @@ -231,14 +214,11 @@ msgid "Choose a product version" msgstr "選擇產品版本" #: menu.sh:227 -msgid "" -"The current version has been set to %s. Do you want to reset the version?" +msgid "The current version has been set to %s. Do you want to reset the version?" msgstr "目前版本已設定為 %s。是否要重設版本？" #: menu.sh:233 -msgid "" -"This version does not support UEFI startup, Please select another version or " -"switch the startup mode." +msgid "This version does not support UEFI startup, Please select another version or switch the startup mode." msgstr "該版本不支援 UEFI 開機，請選擇其他版本或者切換開機模式。" #: menu.sh:244 @@ -246,9 +226,7 @@ msgid "Get pat data ..." msgstr "取得 pat 資料..." #: menu.sh:263 -msgid "" -"Failed to get pat data,\\nPlease manually fill in the URL and md5sum of the " -"corresponding version of pat." +msgid "Failed to get pat data,\\nPlease manually fill in the URL and md5sum of the corresponding version of pat." msgstr "取得 pat 資料失敗，\\n請手動填寫相對版本 pat 的 URL 和 MD5。" #: menu.sh:267 @@ -315,11 +293,8 @@ msgid "Select addon to remove" msgstr "選擇要删除的增益集" #: menu.sh:398 -msgid "" -"Name with color \"\\Z4blue\\Zn\" have been added, with color \"black\" are " -"not added.\\n\\n" -msgstr "" -"名稱色彩為 \"\\Z4藍色\\Zn\" 者為已加入，色彩為 \"黑色\" 者為未加入。\\n\\n" +msgid "Name with color \"\\Z4blue\\Zn\" have been added, with color \"black\" are not added.\\n\\n" +msgstr "名稱色彩為 \"\\Z4藍色\\Zn\" 者為已加入，色彩為 \"黑色\" 者為未加入。\\n\\n" #: menu.sh:413 menu.sh:1462 menu.sh:1493 menu.sh:1526 menu.sh:2017 msgid "This feature is only available when accessed via web/ssh." @@ -387,32 +362,20 @@ msgid "Selecting loaded modules" msgstr "選擇已識別的模組" #: menu.sh:541 -msgid "" -"This function is experimental and dangerous. If you don't know much, please " -"exit.\\n" +msgid "This function is experimental and dangerous. If you don't know much, please exit.\\n" msgstr "該功能是實驗性質且具有風險，如果你不瞭解，請退出。\\n" #: menu.sh:542 -msgid "" -"The imported .ko of this function will be implanted into the corresponding " -"arch's modules package, which will affect all models of the arch.\\n" +msgid "The imported .ko of this function will be implanted into the corresponding arch's modules package, which will affect all models of the arch.\\n" msgstr "該功能匯入 .ko 將植入相對架構的模組套件。這將影響該架構的所有型號。\\n" #: menu.sh:543 -msgid "" -"This program will not determine the availability of imported modules or even " -"make type judgments, as please double check if it is correct.\\n" -msgstr "" -"該程式不會判斷匯入的驅動模組的可用性，甚至不會做類型判斷，因此請再三確認是否" -"正確。\\n" +msgid "This program will not determine the availability of imported modules or even make type judgments, as please double check if it is correct.\\n" +msgstr "該程式不會判斷匯入的驅動模組的可用性，甚至不會做類型判斷，因此請再三確認是否正確。\\n" #: menu.sh:544 -msgid "" -"If you want to remove it, please go to the \"Update Menu\" -> \"Update " -"modules\" to forcibly update the modules. All imports will be reset.\\n" -msgstr "" -"如果您想删除它，請前往「更新 -> 更新模組」強制更新模組。所有匯入都將被重" -"設。\\n" +msgid "If you want to remove it, please go to the \"Update Menu\" -> \"Update modules\" to forcibly update the modules. All imports will be reset.\\n" +msgstr "如果您想删除它，請前往「更新 -> 更新模組」強制更新模組。所有匯入都將被重設。\\n" #: menu.sh:545 msgid "Do you want to continue?" @@ -452,43 +415,28 @@ msgid "Commonly used cmdlines:\\n" msgstr "常用的 cmdlines:\\n" #: menu.sh:603 -msgid "" -" * \\Z4disable_mtrr_trim=\\Zn\\n disables kernel trim any uncacheable " -"memory out.\\n" -msgstr "" -" * \\Z4disable_mtrr_trim=\\Zn\\n 停用核心修剪任何不可快取的記憶體。\\n" +msgid " * \\Z4disable_mtrr_trim=\\Zn\\n disables kernel trim any uncacheable memory out.\\n" +msgstr " * \\Z4disable_mtrr_trim=\\Zn\\n 停用核心修剪任何不可快取的記憶體。\\n" #: menu.sh:604 -msgid "" -" * \\Z4intel_idle.max_cstate=1\\Zn\\n Set the maximum C-state depth " -"allowed by the intel_idle driver.\\n" -msgstr "" -" * \\Z4intel_idle.max_cstate=1\\Zn\\n 設定 intel_idle 驅動程式允許的最大 C-" -"狀態 深度。\\n" +msgid " * \\Z4intel_idle.max_cstate=1\\Zn\\n Set the maximum C-state depth allowed by the intel_idle driver.\\n" +msgstr " * \\Z4intel_idle.max_cstate=1\\Zn\\n 設定 intel_idle 驅動程式允許的最大 C-狀態 深度。\\n" #: menu.sh:605 msgid " * \\Z4SataPortMap=??\\Zn\\n Sata Port Map.\\n" msgstr " * \\Z4SataPortMap=??\\Zn\\n Sata 埠地圖。\\n" #: menu.sh:606 -msgid "" -" * \\Z4DiskIdxMap=??\\Zn\\n Disk Index Map, Modify disk name sequence.\\n" +msgid " * \\Z4DiskIdxMap=??\\Zn\\n Disk Index Map, Modify disk name sequence.\\n" msgstr " * \\Z4DiskIdxMap=??\\Zn\\n 磁碟索引地圖，修改磁碟名稱順序。\\n" #: menu.sh:607 -msgid "" -" * \\Zi915.enable_guc=2\\Zn\\n Enable the GuC firmware on Intel graphics " -"hardware.(value: 1,2 or 3)\\n" -msgstr "" -" * \\Zi915.enable_guc=2\\Zn\\n 啟用 Intel 核顯上的 GuC 韌體.(值: 1,2 or " -"3)\\n" +msgid " * \\Zi915.enable_guc=2\\Zn\\n Enable the GuC firmware on Intel graphics hardware.(value: 1,2 or 3)\\n" +msgstr " * \\Zi915.enable_guc=2\\Zn\\n 在 Intel 圖形硬體上啟用 GuC 韌體。(值: 1,2 或 3)\\n" #: menu.sh:608 -msgid "" -" * \\Zi915.max_vfs=7\\Zn\\n Set the maximum number of virtual functions " -"(VFs) that can be created for Intel graphics hardware.\\n" -msgstr "" -" * \\Zi915.max_vfs=7\\Zn\\n 設定可建立虛擬核顯 (VFs) 的最大數量.\\n" +msgid " * \\Zi915.max_vfs=7\\Zn\\n Set the maximum number of virtual functions (VFs) that can be created for Intel graphics hardware.\\n" +msgstr " * \\Zi915.max_vfs=7\\Zn\\n 設定可在在 Intel 圖形硬體上建立的最大虛擬函式數量。\\n" #: menu.sh:609 menu.sh:740 msgid "\\nEnter the parameter name and value you need to add.\\n" @@ -536,7 +484,7 @@ msgstr "常用的 synoinfo:\\n" #: menu.sh:736 msgid " * \\Z4maxdisks=??\\Zn\\n Maximum number of disks supported.\\n" -msgstr " * \\Z4maxdisks=??\\Zn\\n 支援的最大磁碟數。\\n" +msgstr " * \\Z4maxdisks=??\\Zn\\n 支援的磁碟最大數量。\\n" #: menu.sh:737 msgid " * \\Z4internalportcfg=0x????\\Zn\\n Internal(sata) disks mask.\\n" @@ -567,8 +515,7 @@ msgid "Cleaning cache ..." msgstr "清除快取..." #: menu.sh:831 -msgid "" -"Based on the current network situation, switch to %s mirror to downloading." +msgid "Based on the current network situation, switch to %s mirror to downloading." msgstr "根據目前的網路狀況，已切換到 %s 鏡像伺服器進行下載。" #: menu.sh:835 @@ -584,9 +531,7 @@ msgid "Checking hash of %s: " msgstr "檢查 %s 的雜湊值: " #: menu.sh:855 -msgid "" -"md5 hash of pat not match, Please reget pat data from the version menu and " -"try again!" +msgid "md5 hash of pat not match, Please reget pat data from the version menu and try again!" msgstr "pat 的 md5 雜湊值不相符，請自版本功能表中重新取得 pat 資料並再試一次！" #: menu.sh:858 menu.sh:958 menu.sh:968 @@ -610,9 +555,7 @@ msgid "Encrypted" msgstr "已加密" #: menu.sh:879 -msgid "" -"Could not determine if pat file is encrypted or not, maybe corrupted, try " -"again!" +msgid "Could not determine if pat file is encrypted or not, maybe corrupted, try again!" msgstr "無法確定 pat 檔案是否加密，可能已損壞，請重試！" #: menu.sh:889 @@ -810,9 +753,7 @@ msgid "\\nTotal of ports: %s\\n" msgstr "\\n埠總數: %s\\n" #: menu.sh:1305 -msgid "" -"\\nPorts with color \\Z1red\\Zn as DUMMY, color \\Z2\\Zbgreen\\Zn has drive " -"connected." +msgid "\\nPorts with color \\Z1red\\Zn as DUMMY, color \\Z2\\Zbgreen\\Zn has drive connected." msgstr "\\n\\Z1紅色\\Zn 為空，\\Z2\\Zb綠色\\Zn 為已連接磁碟機。" #: menu.sh:1312 @@ -820,9 +761,7 @@ msgid "pat: (editable)" msgstr "pat: (可編輯)" #: menu.sh:1328 -msgid "" -"This feature will allow you to downgrade the installation by removing the " -"VERSION file from the first partition of all disks.\\n" +msgid "This feature will allow you to downgrade the installation by removing the VERSION file from the first partition of all disks.\\n" msgstr "此功能透過删除所有磁碟第一個分區的 VERSION 檔案以允許你降級安裝。\\n" #: menu.sh:1329 @@ -830,9 +769,7 @@ msgid "Therefore, please insert all disks before continuing.\\n" msgstr "因此，請插入所有磁碟後再繼續。\\n" #: menu.sh:1330 menu.sh:1364 -msgid "" -"Warning:\\nThis operation is irreversible. Please backup important data. Do " -"you want to continue?" +msgid "Warning:\\nThis operation is irreversible. Please backup important data. Do you want to continue?" msgstr "警告:\\n該作業不可逆，請提前備份重要資料。是否繼續？" #: menu.sh:1345 @@ -844,8 +781,7 @@ msgid "Remove VERSION file for all disks completed." msgstr "已移除所有磁碟的 VERSION 檔案。" #: menu.sh:1368 -msgid "" -"Warning:\\nThe current hds is in raid, do you still want to format them?" +msgid "Warning:\\nThe current hds is in raid, do you still want to format them?" msgstr "警告:\\n目前的硬碟使用 raid 中，是否仍要格式化？" #: menu.sh:1379 @@ -881,9 +817,7 @@ msgid "Password reset completed." msgstr "重設密碼完成。" #: menu.sh:1439 menu.sh:1497 menu.sh:1550 -msgid "" -"Warning:\\nDo not terminate midway, otherwise it may cause damage to the RR. " -"Do you want to continue?" +msgid "Warning:\\nDo not terminate midway, otherwise it may cause damage to the RR. Do you want to continue?" msgstr "警告:\\n請不要中途停止，否則將導致 RR 開機損毀，是否繼續？" #: menu.sh:1442 @@ -895,12 +829,8 @@ msgid "Save is complete." msgstr "儲存完成。" #: menu.sh:1466 -msgid "" -"Currently, only dts format files are supported. Please prepare and click to " -"confirm uploading.\\n(saved in /mnt/p3/users/)" -msgstr "" -"目前只支援 dts 格式的檔案，請準備並點選確認上傳。\\n(儲存於 /mnt/p3/users/ " -"中)" +msgid "Currently, only dts format files are supported. Please prepare and click to confirm uploading.\\n(saved in /mnt/p3/users/)" +msgstr "目前只支援 dts 格式的檔案，請準備並點選確認上傳。\\n(儲存於 /mnt/p3/users/ 中)" #: menu.sh:1481 msgid "Not a valid dts file, please try again!" @@ -915,9 +845,7 @@ msgid "Backuping..." msgstr "備份中..." #: menu.sh:1505 -msgid "" -"Failed to generate backup. There may be insufficient memory. Please clear " -"the cache and try again!" +msgid "Failed to generate backup. There may be insufficient memory. Please clear the cache and try again!" msgstr "產生備份失敗，可能記憶體不足，請清除快取後重試！" #: menu.sh:1512 @@ -925,8 +853,7 @@ msgid "Click on the address above to download." msgstr "點選上面的位址下載。" #: menu.sh:1513 -msgid "" -"Please confirm the completion of the download before closing this window." +msgid "Please confirm the completion of the download before closing this window." msgstr "請確認下載完成再關閉此視窗。" #: menu.sh:1520 @@ -934,10 +861,8 @@ msgid "backup is complete." msgstr "備份完成。" #: menu.sh:1530 -msgid "" -"Please upload the backup file.\\nCurrently, zip(github) and img.gz(backup) " -"compressed file formats are supported." -msgstr "請上傳備份的檔案。\\n目前支援 zip(github) 和 img.gz(backup) 格式。" +msgid "Please upload the backup file.\\nCurrently, zip(github) and img.gz(backup) compressed file formats are supported." +msgstr "請上傳備份的檔案\\n目前支援 zip(github) 和 img.gz(backup) 格式。" #: menu.sh:1547 msgid "Not a valid .zip/.img.gz file, please try again!" @@ -952,14 +877,12 @@ msgid "Restore bootloader disk with success to %s!\\nReboot?" msgstr "成功回復開機碟到 %s!\\n重新開機？" #: menu.sh:1578 -msgid "" -"Please via %s to download the logs,\\nAnd go to github to create an issue " -"and upload the logs." +msgid "Please via %s to download the logs,\\nAnd go to github to create an issue and upload the logs." msgstr "請透過 %s 下載記錄，\\n然後前往 github 建立問題並上傳此記錄。" #: menu.sh:1582 msgid "Please go to github to create an issue and upload the logs." -msgstr "請前往 github 建立問題並上傳記錄。" +msgstr "請前往 github 建立問題並上傳此記錄。" #: menu.sh:1586 msgid "\\Z1No logs found!\\Zn\\n\\n" @@ -982,21 +905,15 @@ msgid " 3. Reboot into RR and go to this option.\\n" msgstr " 3. 重新啟動到 RR 並前往這個選項。\\n" #: menu.sh:1597 -msgid "" -"This option only installs opkg package management, allowing you to install " -"more tools for use and debugging. Do you want to continue?" -msgstr "" -"該選項僅安裝 opkg 套件管理工具，讓你能够安裝更多的工具以供使用和除錯，是否繼" -"續？" +msgid "This option only installs opkg package management, allowing you to install more tools for use and debugging. Do you want to continue?" +msgstr "該選項僅安裝 opkg 套件管理工具，讓你能够安裝更多的工具以供使用和除錯，是否繼續？" #: menu.sh:1604 msgid "opkg installing ..." msgstr "opkg 安裝中 ..." #: menu.sh:1606 -msgid "" -"opkg install is complete. Please reconnect to SSH/web, or execute 'source ~/." -"bashrc'" +msgid "opkg install is complete. Please reconnect to SSH/web, or execute 'source ~/.bashrc'" msgstr "opkg 安裝完成。請重新連線 SSH/web，或者執行「source ~/.bashrc」" #: menu.sh:1621 menu.sh:1656 menu.sh:1663 @@ -1086,9 +1003,7 @@ msgid "Checksum do not match!" msgstr "總和檢查碼不相符！" #: menu.sh:1847 -msgid "" -"The current version does not support upgrading to the latest update.zip. " -"Please remake the bootloader disk!" +msgid "The current version does not support upgrading to the latest update.zip. Please remake the bootloader disk!" msgstr "目前版本不支援升級到最新的 update.zip。請重新製作開機程式磁碟！" #: menu.sh:1852 @@ -1169,9 +1084,7 @@ msgid "Invalid proxy server url, continue?" msgstr "代理伺服器網址無效，是否繼續？" #: menu.sh:2021 -msgid "" -"Please keep the attachment name consistent with the attachment name on " -"Github.\\n" +msgid "Please keep the attachment name consistent with the attachment name on Github.\\n" msgstr "請保持附件名稱與 Github 上的附件名稱一致。\\n" #: menu.sh:2022 @@ -1294,7 +1207,5 @@ msgstr "執行 \\033[1;32mmenu.sh\\033[0m 重新回到功能表" #~ msgid "Type a value of '%s' synoinfo entry" #~ msgstr "輸入 '%s' 參數的值”" -#~ msgid "" -#~ "This version only support usb startup, Please select another version or " -#~ "switch the startup mode." +#~ msgid "This version only support usb startup, Please select another version or switch the startup mode." #~ msgstr "該版本僅支援 USB 開機，請選擇其他版本或者切換開機模式。"