# Chinese translations for RR package.
# Copyright (C) 2023 THE RR'S COPYRIGHT HOLDER
# This file is distributed under the same license as the RR package.
# Ing <wjz304>, 2023.
#
msgid ""
msgstr ""
"Project-Id-Version: RR\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-01-18 13:16+0800\n"
"PO-Revision-Date: 2024-01-19 14:25+0800\n"
"Last-Translator: Ing <wjz304>\n"
"Language-Team: Chinese (simplified) <i18n-zh@RROrg>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 3.4.2\n"

#: boot.sh:8 init.sh:9 menu.sh:9
msgid "Loader is not init!"
msgstr "引导未初始化!"

#: boot.sh:10 init.sh:107
msgid "Loader is not configured!"
msgstr "引导未配置!"

#: boot.sh:20 init.sh:14
msgid "Welcome to %s"
msgstr "Welcome to %s"

#: boot.sh:33
msgid "DSM zImage changed"
msgstr "DSM zImage 已更改"

#: boot.sh:36 menu.sh:1215
msgid ""
"zImage not patched,\\nPlease upgrade the bootloader version and try again."
"\\nPatch error:\\n"
msgstr "zImage 打补丁失败,\\n请升级引导版本并重试.\\nPatch 错误:\\n"

#: boot.sh:45
msgid "DSM Ramdisk changed"
msgstr "DSM Ramdisk 已更改"

#: boot.sh:48 menu.sh:1221
msgid ""
"Ramdisk not patched,\\nPlease upgrade the bootloader version and try again."
"\\nPatch error:\\n"
msgstr "Ramdisk 打补丁失败,\\n请升级引导版本并重试.\\nPatch 错误:\\n"

#: boot.sh:67
msgid "Model:"
msgstr "型号: "

#: boot.sh:68
msgid "Build:"
msgstr "版本: "

#: boot.sh:69
msgid "LKM:  "
msgstr "LKM:  "

#: boot.sh:70
msgid "DMI:  "
msgstr "DMI:  "

#: boot.sh:71
msgid "CPU:  "
msgstr "CPU:  "

#: boot.sh:72
msgid "MEM:  "
msgstr "MEM:  "

#: boot.sh:75
msgid ""
"The current version of bootloader does not support booting %s-%s, please "
"upgrade and rebuild."
msgstr "当前版本的引导盘不支持引导 %s-%s, 请升级并重新编译."

#: boot.sh:87
msgid ""
"Please insert at least one sata/scsi disk for system installation, except "
"for the bootloader disk."
msgstr "除引导盘外, 请至少插入一块 sata/scsi 磁盘进行系统安装."

#: boot.sh:166
msgid "Cmdline:\\n"
msgstr "Cmdline:\\n"

#: boot.sh:172
msgid "Reboot to boot directly in DSM"
msgstr "重启并直接进入 DSM 引导"

#: boot.sh:178 init.sh:120
msgid "Detected %s network cards."
msgstr "检测到 %s 个网卡."

#: boot.sh:179 init.sh:121
msgid "Checking Connect."
msgstr "检查连接."

#: boot.sh:199
msgid "Waiting IP.(For reference only)"
msgstr "获取 IP.(仅供参考)"

#: boot.sh:206 init.sh:146
msgid "DOWN"
msgstr "关闭"

#: boot.sh:210 init.sh:150
msgid "NOT CONNECTED"
msgstr "未连接"

#: boot.sh:214 init.sh:154
msgid "TIMEOUT (Please check the IP on the router.)"
msgstr "超时 (请检查路由器上的IP.)"

#: boot.sh:220
msgid "Access \\033[1;34mhttp://%s:5000\\033[0m to connect the DSM via web."
msgstr "在浏览器中访问 \\033[1;34mhttp://%s:5000\\033[0m 链接 DSM."

#: boot.sh:232
msgid "%2ds (Changing access(ssh/web) status will interrupt boot)"
msgstr "%2ds ((ssh/web)连接状态改变将中断启动)"

#: boot.sh:236
msgid "access(ssh/web) status has changed and booting is interrupted."
msgstr "(ssh/web)连接状态已改变, 启动被中断."

#: boot.sh:246
msgid "Loading DSM kernel ..."
msgstr "加载 DSM 内核 ..."

#: boot.sh:262
msgid "Warning, running kexec with --noefi param, strange things will happen!!"
msgstr "警告, 使用'--noefi'参数运行'kexec', 可能有不好的事情发生!!"

#: boot.sh:267
msgid "Booting ..."
msgstr "引导中 ..."

#: boot.sh:269
msgid ""
"[This interface will not be operational. Please wait a few minutes.\\nFind "
"DSM via http://find.synology.com/ or Synology Assistant and connect.]"
msgstr ""
"[该界面已不可操作. 请在数分钟后\\n通过 http://find.synology.com/ 或者 "
"Synology Assistant 查找 DSM 并访问.]"

#: init.sh:23
msgid "Network devices not found!"
msgstr "未找到网卡!"

#: init.sh:84
msgid "Loader disk neither USB or SATA/SCSI/NVME/MMC DoM"
msgstr "引导磁盘仅支持 USB 或者 SATA/SCSI/NVME/MMC DoM"

#: init.sh:92
msgid "Loader disk:"
msgstr "引导盘:"

#: init.sh:100
msgid "Loading keymap"
msgstr "加载键盘映射"

#: init.sh:110
msgid "User requested edit settings."
msgstr "用户触发编辑设置."

#: init.sh:139
msgid "Waiting IP."
msgstr "获取 IP."

#: init.sh:160
msgid ""
"Access \\033[1;34mhttp://%s:7681\\033[0m to configure the loader via web "
"terminal."
msgstr ""
"在浏览器中访问 \\033[1;34mhttp://%s:7681\\033[0m 进入 WEB 终端进行配置."

#: init.sh:170
msgid "Call \\033[1;32mmenu.sh\\033[0m to configure loader"
msgstr "执行 \\033[1;32mmenu.sh\\033[0m 进入设置菜单"

#: init.sh:172
msgid "User config is on"
msgstr "用户配置文件位于"

#: init.sh:173
msgid "TTYD: \\033[1;34mhttp://rr:7681/\\033[0m"
msgstr "TTYD: \\033[1;34mhttp://rr:7681/\\033[0m"

#: init.sh:174
msgid "DUFS: \\033[1;34mhttp://rr:7304/\\033[0m"
msgstr "DUFS: \\033[1;34mhttp://rr:7304/\\033[0m"

#: init.sh:175
msgid "TTYD&DUFS: \\033[1;34mhttp://rr:80/\\033[0m"
msgstr "TTYD&DUFS: \\033[1;34mhttp://rr:80/\\033[0m"

#: init.sh:177
msgid "Default SSH Root password is"
msgstr "默认 SSH 的 root 密码为"

#: init.sh:194
msgid ""
"You have less than 4GB of RAM, if errors occur in loader creation, please "
"increase the amount of memory."
msgstr "您的 RAM 不足 4GB, 如果在创建引导时出现错误, 请增加内存."

#: menu.sh:100 menu.sh:134 menu.sh:177
msgid "Model"
msgstr "型号"

#: menu.sh:101
msgid "Reading models"
msgstr "读取型号"

#: menu.sh:111
msgid "Compatibility judgment"
msgstr "兼容性判断"

#: menu.sh:132
msgid "Disable flags restriction"
msgstr "禁用标志限制"

#: menu.sh:133
msgid "Show all models"
msgstr "显示所有型号"

#: menu.sh:135
msgid "Choose the model"
msgstr "选择型号"

#: menu.sh:227 menu.sh:238 menu.sh:244 menu.sh:255 menu.sh:281 menu.sh:301
#: menu.sh:351
msgid "Product Version"
msgstr "版本"

#: menu.sh:228
msgid "Choose a product version"
msgstr "选择版本"

#: menu.sh:239
msgid ""
"The current version has been set to %s. Do you want to reset the version?"
msgstr "当前版本已设置为 %s. 是否要重置版本?"

#: menu.sh:245
msgid ""
"This version does not support UEFI startup, Please select another version or "
"switch the startup mode."
msgstr "该版本不支持 UEFI 启动, 请选择其他版本或者切换启动模式."

#: menu.sh:256
msgid "Get pat data ..."
msgstr "获取 pat 数据 ..."

#: menu.sh:275
msgid ""
"Failed to get pat data,\\nPlease manually fill in the URL and md5sum of the "
"corresponding version of pat."
msgstr "获取 pat 数据失败,\\n请手动填写相应版本 pat 的 URL 和 MD5."

#: menu.sh:279
msgid "Successfully to get pat data,\\nPlease confirm or modify as needed."
msgstr "获取 pat 数据成功,\\n请确认或者按需修改."

#: menu.sh:282
msgid "Retry"
msgstr "重试"

#: menu.sh:302 menu.sh:404
msgid "Reconfiguring Synoinfo, Addons and Modules"
msgstr "重新配置 Syninfo, 插件和模块"

#: menu.sh:336
msgid ""
"You have selected the %s and %s.\\n'Parse Pat' will overwrite the previous "
"selection.\\nDo you want to continue?"
msgstr "你已经选择了 %s 和 %s.\\n‘解析 Pat' 将覆盖之前的选择.\\n是否继续?"

#: menu.sh:337
msgid "Parse Pat"
msgstr "解析 Pat"

#: menu.sh:345
msgid "No pat file found in users folder!\\n"
msgstr "在用户文件夹中找不到 pat 文件!\\n"

#: menu.sh:346
msgid ""
"Please upload the pat file to /mnt/p3/users/ folder via DUFS and re-enter "
"this option.\\n"
msgstr ""
"请通过 DUFS 将 pat 文件上传到 /mnt/p3/users/ 文件夹，然后重新输入此选项.\\n"

#: menu.sh:347 menu.sh:357 menu.sh:2302 menu.sh:2366 menu.sh:2376 menu.sh:2393
#: menu.sh:2413
msgid "Update"
msgstr "更新"

#: menu.sh:352
msgid "Choose a pat file"
msgstr "选择一个 pat 文件"

#: menu.sh:358 menu.sh:370 menu.sh:1097
msgid "pat Invalid, try again!"
msgstr "无效的 pat, 请重试!"

#: menu.sh:363
msgid "Parse %s ..."
msgstr "解析 %s ..."

#: menu.sh:388
msgid "Currently, %s is not supported."
msgstr "目前，不支持 %s."

#: menu.sh:400
msgid "Currently, %s of %s is not supported."
msgstr "目前，不支持 %s-%s."

#: menu.sh:461 menu.sh:1231 menu.sh:2482
msgid "Main menu"
msgstr "主菜单"

#: menu.sh:462 menu.sh:1232
msgid "Making ..."
msgstr "编译中 ..."

#: menu.sh:464 menu.sh:1234
msgid "Error"
msgstr "错误"

#: menu.sh:497 menu.sh:514 menu.sh:519 menu.sh:525 menu.sh:536 menu.sh:544
#: menu.sh:567 menu.sh:574 menu.sh:578 menu.sh:592 menu.sh:596 menu.sh:604
#: menu.sh:607
msgid "Addons"
msgstr "插件"

#: menu.sh:498 menu.sh:628 menu.sh:783 menu.sh:918 menu.sh:2483
msgid "Choose a option"
msgstr "选择一个选项"

#: menu.sh:499
msgid "Add an addon"
msgstr "添加插件"

#: menu.sh:500
msgid "Delete addons"
msgstr "删除插件"

#: menu.sh:501
msgid "Show all addons"
msgstr "显示所有插件"

#: menu.sh:502
msgid "Upload a external addon"
msgstr "上传外部插件"

#: menu.sh:503 menu.sh:634 menu.sh:781 menu.sh:916 menu.sh:1292 menu.sh:2300
#: menu.sh:2480 menu.sh:2556
msgid "Exit"
msgstr "退出"

#: menu.sh:515
msgid "No available addons to add"
msgstr "没有可用的插件可添加"

#: menu.sh:520
msgid "Select an addon"
msgstr "选择插件"

#: menu.sh:526
msgid "Type a optional params to addon"
msgstr "输入插件的加载参数"

#: menu.sh:537
msgid "No user addons to remove"
msgstr "没有要删除的用户插件"

#: menu.sh:545
msgid "Select addon to remove"
msgstr "选择要删除的插件"

#: menu.sh:558
msgid ""
"Name with color \"\\Z4blue\\Zn\" have been added, with color \"black\" are "
"not added.\\n\\n"
msgstr "名称颜色为\"\\Z4蓝色\\Zn\"的为已添加, 颜色为\"黑色\"的为未添加.\\n\\n"

#: menu.sh:573 menu.sh:706 menu.sh:1739 menu.sh:2364
msgid ""
"This feature is only available when accessed via ssh (Requires a terminal "
"that supports ZModem protocol).\\n"
msgstr "此功能仅在通过 ssh 访问时可用(需要支持 ZModem 协议的终端).\\n"

#: menu.sh:579
msgid "Please upload the *.addons file."
msgstr "请上传 *.addons 文件."

#: menu.sh:593 menu.sh:741 menu.sh:2394 menu.sh:2414
msgid "Not a valid file, please try again!"
msgstr "不是有效的文件, 请重试!"

#: menu.sh:597
msgid "The addon already exists. Do you want to overwrite it?"
msgstr "该插件已存在, 是否覆盖?"

#: menu.sh:605
msgid "Addon '%s' added to loader, Please enable it in 'Add an addon' menu."
msgstr "插件 '%s' 已添加到引导中, 请在'添加插件' 菜单中开启."

#: menu.sh:608
msgid "File format not recognized!"
msgstr "文件格式无法识别!"

#: menu.sh:627 menu.sh:640 menu.sh:653 menu.sh:690 menu.sh:707 menu.sh:717
#: menu.sh:720 menu.sh:736 menu.sh:740
msgid "Modules"
msgstr "模块"

#: menu.sh:629
msgid "Show/Select modules"
msgstr "显示/选择模块"

#: menu.sh:630
msgid "Select loaded modules"
msgstr "选择已识别的模块"

#: menu.sh:631
msgid "Upload a external module"
msgstr "上传一个外部模块"

#: menu.sh:632
msgid "Priority use of official drivers:"
msgstr "优先使用官方模块:"

#: menu.sh:633
msgid "Edit modules that need to be copied to DSM"
msgstr "编辑需要拷贝到 DSM 的模块"

#: menu.sh:641
msgid "Reading modules ..."
msgstr "读取模块中 ..."

#: menu.sh:654
msgid "Select all"
msgstr "选择全部"

#: menu.sh:655
msgid "Deselect all"
msgstr "取消全选"

#: menu.sh:656
msgid "Select modules to include"
msgstr "选择要加载的插件"

#: menu.sh:691
msgid "Selecting loaded modules"
msgstr "选择已识别的模块"

#: menu.sh:712
msgid ""
"This function is experimental and dangerous. If you don't know much, please "
"exit.\\n"
msgstr "这个功能是实验性的, 很危险. 如果你知道的不多, 请退出. \\n"

#: menu.sh:713
msgid ""
"The imported .ko of this function will be implanted into the corresponding "
"arch's modules package, which will affect all models of the arch.\\n"
msgstr ""
"该功能导入 .ko 将被植入相应的架构的模块包中, 这将影响该架构的所有型号.\\n"

#: menu.sh:714
msgid ""
"This program will not determine the availability of imported modules or even "
"make type judgments, as please double check if it is correct.\\n"
msgstr ""
"该程序不会判断导入的驱动模块的可用性, 甚至不会做类型判断, 因从请你再三确认是"
"否正确.\\n"

#: menu.sh:715
msgid ""
"If you want to remove it, please go to the \"Update Menu\" -> \"Update "
"modules\" to forcibly update the modules. All imports will be reset.\\n"
msgstr ""
"如果您想删除它, 请转到 \"更新\"->\"更新模块\" 强制更新模块, 所有导入都将被重"
"置.\\n"

#: menu.sh:716
msgid "Do you want to continue?"
msgstr "是否继续?"

#: menu.sh:721
msgid "Please upload the *.ko file."
msgstr "请上传 *.ko 文件."

#: menu.sh:737
msgid "Module '%s' added to %s-%s"
msgstr "模块 '%s' 已添加到 %s-%s"

#: menu.sh:755 menu.sh:2037 menu.sh:2044 menu.sh:2067
msgid "Edit with caution"
msgstr "请谨慎编辑"

#: menu.sh:775
msgid "Add/Edit a cmdline item"
msgstr "添加/编辑 cmdline 参数"

#: menu.sh:776
msgid "Show/Delete cmdline items"
msgstr "显示/删除 cmdline 参数"

#: menu.sh:778
msgid "Define SN/MAC"
msgstr "自定义 SN/MAC"

#: menu.sh:780
msgid "Show model inherent cmdline"
msgstr "显示型号默认的 cmdline 参数"

#: menu.sh:782 menu.sh:801 menu.sh:810 menu.sh:834 menu.sh:842 menu.sh:859
#: menu.sh:870 menu.sh:902
msgid "Cmdline"
msgstr "Cmdline"

#: menu.sh:789
msgid "Commonly used cmdlines:\\n"
msgstr "常用 cmdlines:\\n"

#: menu.sh:790
msgid ""
" * \\Z4disable_mtrr_trim=\\Zn\\n    disables kernel trim any uncacheable "
"memory out.\\n"
msgstr " * \\Z4disable_mtrr_trim=\\Zn\\n    禁用内核修剪任何不可缓存的内存.\\n"

#: menu.sh:791
msgid ""
" * \\Z4intel_idle.max_cstate=1\\Zn\\n    Set the maximum C-state depth "
"allowed by the intel_idle driver.\\n"
msgstr ""
" * \\Z4intel_idle.max_cstate=1\\Zn\\n    设置 intel_idle 驱动允许使用的最大 "
"C-state 深度.\\n"

#: menu.sh:792
msgid ""
" * \\Z4pcie_port_pm=off\\Zn\\n    Turn off the power management of the PCIe "
"port.\\n"
msgstr " * \\Z4pcie_port_pm=off\\Zn\\n    关闭 PCIe 端口的电源管理.\\n"

#: menu.sh:793
msgid " * \\Z4libata.force=noncq\\Zn\\n    Disable NCQ for all SATA ports.\\n"
msgstr " * \\Z4libata.force=noncq\\Zn\\n    禁用硬盘的 NCQ 功能.\\n"

#: menu.sh:794
msgid " * \\Z4SataPortMap=??\\Zn\\n    Sata Port Map.\\n"
msgstr " * \\Z4SataPortMap=??\\Zn\\n    Sata Port Map.\\n"

#: menu.sh:795
msgid ""
" * \\Z4DiskIdxMap=??\\Zn\\n    Disk Index Map, Modify disk name sequence.\\n"
msgstr " * \\Z4DiskIdxMap=??\\Zn\\n    Disk Index Map, 修改磁盘名称顺序.\\n"

#: menu.sh:796
msgid ""
" * \\Z4i915.enable_guc=2\\Zn\\n    Enable the GuC firmware on Intel graphics "
"hardware.(value: 1,2 or 3)\\n"
msgstr ""
" * \\Z4i915.enable_guc=2\\Zn\\n    启用 Intel 核显上的 GuC 固件.(值: 1,2 or "
"3)\\n"

#: menu.sh:797
msgid ""
" * \\Z4i915.max_vfs=7\\Zn\\n     Set the maximum number of virtual functions "
"(VFs) that can be created for Intel graphics hardware.\\n"
msgstr ""
" * \\Z4i915.max_vfs=7\\Zn\\n     设置可创建虚拟核显 (VFs) 的最大数量.\\n"

#: menu.sh:798 menu.sh:929
msgid "\\nEnter the parameter name and value you need to add.\\n"
msgstr "\\n输入需要添加的参数名称和值.\\n"

#: menu.sh:811 menu.sh:942
msgid "Invalid parameter name, retry?"
msgstr "无效参数名称, 重试?"

#: menu.sh:835
msgid "No user cmdline to remove"
msgstr "没有用户参数被删除"

#: menu.sh:843
msgid "Select cmdline to remove"
msgstr "选择要删除的参数"

#: menu.sh:854
msgid "Note: (MAC will not be set to NIC, Only for activation services.)"
msgstr "注意: (MAC 不会设置到 NIC, 仅用于激活服务.)"

#: menu.sh:860
msgid "Random"
msgstr "随机"

#: menu.sh:871
msgid "Invalid SN/MAC, retry?"
msgstr "无效 SN/MAC, 重试?"

#: menu.sh:914
msgid "Add/edit a synoinfo item"
msgstr "添加/编辑 Synoinfo 参数"

#: menu.sh:915
msgid "Show/Delete synoinfo items"
msgstr "显示/删除 Synoinfo 参数"

#: menu.sh:917 menu.sh:932 menu.sh:941 menu.sh:966 menu.sh:974
msgid "Synoinfo"
msgstr "Synoinfo"

#: menu.sh:924
msgid "Commonly used synoinfo:\\n"
msgstr "常用 synoinfo:\\n"

#: menu.sh:925
msgid " * \\Z4maxdisks=??\\Zn\\n    Maximum number of disks supported.\\n"
msgstr " * \\Z4maxdisks=??\\Zn\\n    最大硬盘数.\\n"

#: menu.sh:926
msgid " * \\Z4internalportcfg=0x????\\Zn\\n    Internal(sata) disks mask.\\n"
msgstr " * \\Z4internalportcfg=0x????\\Zn\\n    Internal(sata) 磁盘掩码.\\n"

#: menu.sh:927
msgid " * \\Z4esataportcfg=0x????\\Zn\\n    Esata disks mask.\\n"
msgstr " * \\Z4esataportcfg=0x????\\Zn\\n    Esata 磁盘掩码.\\n"

#: menu.sh:928
msgid " * \\Z4usbportcfg=0x????\\Zn\\n    USB disks mask.\\n"
msgstr " * \\Z4usbportcfg=0x????\\Zn\\n    USB 磁盘掩码.\\n"

#: menu.sh:967
msgid "No synoinfo entries to remove"
msgstr "没有 Synoinfo 参数被删除"

#: menu.sh:975
msgid "Select synoinfo entry to remove"
msgstr "选择要删除的参数"

#: menu.sh:1005
msgid "Downloading old pat to extract synology .pat extractor..."
msgstr "下载旧 pat, 提取 .pat 解密程序中..."

#: menu.sh:1011 menu.sh:1145
msgid "Check internet or cache disk space.\\nError: %d:%d"
msgstr "请检查网络连接或磁盘空间.\\nError: %d:%d"

#: menu.sh:1050
msgid "Uncompressed tar"
msgstr "未压缩 tar"

#: menu.sh:1054
msgid "Compressed tar"
msgstr "已压缩 tar"

#: menu.sh:1058
msgid "Encrypted"
msgstr "已加密"

#: menu.sh:1062
msgid ""
"Could not determine if pat file is encrypted or not, maybe corrupted, try "
"again!"
msgstr "无法确定 pat 文件是否加密, 可能已损坏, 请重试!"

#: menu.sh:1069 menu.sh:1161
msgid "Disassembling %s: "
msgstr "解压缩 %s: "

#: menu.sh:1076
msgid "Extractor cached."
msgstr "已存在解密程序."

#: menu.sh:1082 menu.sh:1085
msgid "Extracting ..."
msgstr "解压中 ..."

#: menu.sh:1118
msgid "%s cached."
msgstr "%s 已缓存."

#: menu.sh:1122
msgid "Cleaning cache ..."
msgstr "清除缓存 ..."

#: menu.sh:1131
msgid ""
"Based on the current network situation, switch to %s mirror to downloading."
msgstr "根据当前的网络状况, 已切换到 %s 镜像服务器进行下载."

#: menu.sh:1134
msgid "Downloading %s ..."
msgstr "下载 %s 中 ..."

#: menu.sh:1151
msgid "Checking hash of %s: "
msgstr "检查 %s 的 hash: "

#: menu.sh:1154
msgid ""
"md5 hash of pat not match, Please reget pat data from the version menu and "
"try again!"
msgstr "pat 的 md5 Hash 不匹配, 请在版本菜单中重新获取 pat 数据后重试!"

#: menu.sh:1157 menu.sh:1173 menu.sh:1183
msgid "OK"
msgstr "OK"

#: menu.sh:1168
msgid "Setting hash: "
msgstr "设置 hash: "

#: menu.sh:1175
msgid "Copying files: "
msgstr "拷贝文件: "

#: menu.sh:1199
msgid "Addon %s not found!"
msgstr "插件 %s 未找到!"

#: menu.sh:1225
msgid "Cleaning ..."
msgstr "清除中 ..."

#: menu.sh:1227
msgid "Ready!"
msgstr "已就绪!"

#: menu.sh:1252
msgid "Switch LKM version:"
msgstr "选择 LKM 版本:"

#: menu.sh:1253
msgid "HDD sort(hotplug):"
msgstr "HDD 排序(hotplug):"

#: menu.sh:1256
msgid "Switch direct boot:"
msgstr "切换直接启动:"

#: menu.sh:1258
msgid "Timeout of get ip in boot:"
msgstr "启动时获取 IP 的超时时间:"

#: menu.sh:1259
msgid "Timeout of boot wait:"
msgstr "启动超时时间:"

#: menu.sh:1260
msgid "kernel switching method:"
msgstr "内核切换的方式:"

#: menu.sh:1262
msgid "Reboot on kernel panic:"
msgstr "内核恐慌时重新启动:"

#: menu.sh:1264
msgid "Set static IP"
msgstr "设置静态 IP"

#: menu.sh:1265
msgid "Set wireless account"
msgstr "设置无线帐号"

#: menu.sh:1266
msgid "Edit user config file manually"
msgstr "手动编辑用户配置文件"

#: menu.sh:1267
msgid "Edit grub.cfg file manually"
msgstr "手动编辑 grub.cfg 文件"

#: menu.sh:1268
msgid "Try to recovery a DSM installed system"
msgstr "尝试恢复已安装 DSM 的系统"

#: menu.sh:1269
msgid "Show disks information"
msgstr "显示磁盘信息"

#: menu.sh:1271
msgid "show/modify the current pat data"
msgstr "显示/修改当前 pat 下载链接"

#: menu.sh:1273
msgid "Allow downgrade installation"
msgstr "允许降级安装"

#: menu.sh:1274
msgid "Format disk(s) # Without loader disk"
msgstr "格式化磁盘(s) # 不含启动盘"

#: menu.sh:1275
msgid "Reset DSM system password"
msgstr "重置 DSM 系统密码"

#: menu.sh:1276
msgid "Force enable telnet of DSM system"
msgstr "强制打开 DSM 的 telnet"

#: menu.sh:1277
msgid "Save modifications of '/opt/rr'"
msgstr "保存'/opt/rr'的修改"

#: menu.sh:1279
msgid "Custom dts file # Need rebuild"
msgstr "自定义 dts 文件 # 需要重新编译"

#: menu.sh:1281
msgid "Custom patch script # Developer"
msgstr "自定义补丁脚本 # 开发"

#: menu.sh:1283
msgid "Use EMMC as the system disk:"
msgstr "使用 EMMC 作为系统磁盘:"

#: menu.sh:1285
msgid "Clone bootloader disk to another disk"
msgstr "克隆引导盘到另一个磁盘"

#: menu.sh:1286
msgid "Report bugs to the author"
msgstr "向作者报告错误"

#: menu.sh:1287
msgid "Install development tools"
msgstr "安装开发者工具"

#: menu.sh:1288
msgid "Show QR logo:"
msgstr "显示 QR logo:"

#: menu.sh:1289
msgid "Set global proxy"
msgstr "设置全局代理"

#: menu.sh:1290
msgid "Set github proxy"
msgstr "设置 GitHub 代理"

#: menu.sh:1291
msgid "Vigorously miracle"
msgstr "大力出奇迹"

#: menu.sh:1294 menu.sh:1318 menu.sh:1330 menu.sh:1350 menu.sh:1373
#: menu.sh:1397 menu.sh:1402 menu.sh:1414 menu.sh:1423 menu.sh:1445
#: menu.sh:1546 menu.sh:1553 menu.sh:1571 menu.sh:1584 menu.sh:1587
#: menu.sh:1600 menu.sh:1604 menu.sh:1605 menu.sh:1610 menu.sh:1614
#: menu.sh:1629 menu.sh:1631 menu.sh:1654 menu.sh:1658 menu.sh:1665
#: menu.sh:1671 menu.sh:1689 menu.sh:1691 menu.sh:1695 menu.sh:1709
#: menu.sh:1711 menu.sh:1715 menu.sh:1718 menu.sh:1733 menu.sh:1741
#: menu.sh:1745 menu.sh:1760 menu.sh:1765 menu.sh:1776 menu.sh:1808
#: menu.sh:1812 menu.sh:1818 menu.sh:1824 menu.sh:1830 menu.sh:1861
#: menu.sh:1874 menu.sh:1878 menu.sh:1888 menu.sh:1893 menu.sh:1900
#: menu.sh:1902 menu.sh:1914 menu.sh:1925 menu.sh:1947 menu.sh:1958
#: menu.sh:1975
msgid "Advanced"
msgstr "高级"

#: menu.sh:1295
msgid "Advanced option"
msgstr "高级设置"

#: menu.sh:1319 menu.sh:1331 menu.sh:1351
msgid "Choose a time(seconds)"
msgstr "选择一个时间(秒)"

#: menu.sh:1361
msgid "Temporary IP: (UI will not refresh)"
msgstr "临时 IP: (UI 不会刷新)"

#: menu.sh:1398
msgid "Setting IP ..."
msgstr "设置 IP ..."

#: menu.sh:1403
msgid "Scanning ..."
msgstr "扫描中 ..."

#: menu.sh:1406
msgid "Scanned SSIDs:\\n"
msgstr "扫描到的 SSIDs:\\n"

#: menu.sh:1424
msgid "Invalid SSID/PSK, retry?"
msgstr "无效 SSID/PSK, 重试?"

#: menu.sh:1446
msgid "Setting ..."
msgstr "设置中 ..."

#: menu.sh:1544
msgid "\\nTotal of ports: %s\\n"
msgstr "\\n端口总数: %s\\n"

#: menu.sh:1545
msgid ""
"\\nPorts with color \\Z1red\\Zn as DUMMY, color \\Z2\\Zbgreen\\Zn has drive "
"connected."
msgstr "\\n\\Z1红色\\Zn 为模拟端口, \\Z2\\Zb绿色\\Zn 为已驱动的物理端口."

#: menu.sh:1552
msgid "pat: (editable)"
msgstr "pat: (可编辑)"

#: menu.sh:1568
msgid ""
"This feature will allow you to downgrade the installation by removing the "
"VERSION file from the first partition of all disks.\\n"
msgstr "此功能通过删除所有磁盘的第一个分区的 VERSION 文件来允许你降级安装.\\n"

#: menu.sh:1569
msgid "Therefore, please insert all disks before continuing.\\n"
msgstr "因此, 请插入所有磁盘后再进行操作.\\n"

#: menu.sh:1570 menu.sh:1611
msgid ""
"Warning:\\nThis operation is irreversible. Please backup important data. Do "
"you want to continue?"
msgstr "警告:\\n该操作不可逆, 请提前备份重要数据. 是否继续?"

#: menu.sh:1585
msgid "Removing ..."
msgstr "删除中 ..."

#: menu.sh:1586
msgid "Remove VERSION file for all disks completed."
msgstr "已移除所有磁盘的 VERSION 文件."

#: menu.sh:1601 menu.sh:1809
msgid "No disk found!"
msgstr "未找到磁盘!"

#: menu.sh:1615
msgid ""
"Warning:\\nThe current hds is in raid, do you still want to format them?"
msgstr "警告:\\n当前的硬盘处于 raid 中，是否仍要格式化?"

#: menu.sh:1630
msgid "Formatting ..."
msgstr "格式化中 ..."

#: menu.sh:1632
msgid "Formatting is complete."
msgstr "格式化完成."

#: menu.sh:1655
msgid "The installed Syno system not found in the currently inserted disks!"
msgstr "未在当前插入的硬盘中找到已安装的 syno 系统!"

#: menu.sh:1659
msgid "Choose a user name"
msgstr "选择一个用户"

#: menu.sh:1666
msgid "Type a new password for user '%s'"
msgstr "输入用户 '%s' 的新密码"

#: menu.sh:1672
msgid "Invalid password"
msgstr "无效密码"

#: menu.sh:1690
msgid "Resetting ..."
msgstr "重置中 ..."

#: menu.sh:1692
msgid "Password reset completed."
msgstr "重置密码完成."

#: menu.sh:1696
msgid "Please insert all disks before continuing.\\n"
msgstr "请插入所有磁盘后再进行操作.\\n"

#: menu.sh:1710
msgid "Enabling ..."
msgstr "开启中 ..."

#: menu.sh:1712
msgid "Telnet is enabled."
msgstr "Telnet 已开启."

#: menu.sh:1716
msgid ""
"Warning:\\nDo not terminate midway, otherwise it may cause damage to the RR. "
"Do you want to continue?"
msgstr "警告:\\n请不要中途停止, 否则将导致 RR 引导损毁, 是否继续?"

#: menu.sh:1719
msgid ""
"Saving ...\\n(It usually takes 5-10 minutes, please be patient and wait.)"
msgstr "保存中 ...\\n(一般需要 5~10 分钟，请耐心等待.)"

#: menu.sh:1734
msgid "Save is complete."
msgstr "保存完成."

#: menu.sh:1740
msgid ""
"Or upload the dts file to %s via DUFS, Will be automatically imported when "
"building."
msgstr "或者通过 DUFS 上传 dts 文件到 %s, 编译时会自动导入."

#: menu.sh:1746
msgid ""
"Currently, only dts format files are supported. Please prepare and click to "
"confirm uploading.\\n(saved in /mnt/p3/users/)"
msgstr ""
"目前, 只支持 dts 格式的文件, 请准备并点击确认上传.\\n(保存于 /mnt/p3/users/ "
"中)"

#: menu.sh:1761
msgid "Not a valid dts file, please try again!"
msgstr "dts 文件无效, 请重试!"

#: menu.sh:1766
msgid "A valid dts file, Automatically import at compile time."
msgstr "dts 文件有效, 将在编译时自动导入."

#: menu.sh:1772
msgid "This option is only informative.\\n\\n"
msgstr "此选项仅为提示.\\n\\n"

#: menu.sh:1773
msgid "This program reserves an interface for ramdisk custom patch scripts.\\n"
msgstr "此程序为 ramdisk 自定义补丁脚本保留了一个接口.\\n"

#: menu.sh:1774
msgid "Call timing: called before ramdisk packaging.\\n"
msgstr "调用时机: 在 ramdisk 打包前调用.\\n"

#: menu.sh:1775
msgid "Location: /mnt/p3/scripts/*.sh\\n"
msgstr "位置: /mnt/p3/scripts/*.sh\\n"

#: menu.sh:1813
msgid "Choose a disk to clone to"
msgstr "选择要克隆到的磁盘"

#: menu.sh:1819
msgid "No disk selected!"
msgstr "未选择磁盘!"

#: menu.sh:1825
msgid "Disk %s size is less than 1GB and cannot be cloned!"
msgstr "磁盘 %s 的大小小于 1GB，无法克隆!"

#: menu.sh:1829
msgid ""
"Warning:\\nDisk %s will be formatted and written to the bootloader. Please "
"confirm that important data has been backed up. \\nDo you want to continue?"
msgstr ""
"警告:\\n磁盘 %s 将被格式化并写入引导程序. 请确认重要数据已备份. \\n是否继续?"

#: menu.sh:1862
msgid "Cloning ..."
msgstr "克隆中 ..."

#: menu.sh:1864
msgid ""
"Bootloader has been cloned to disk %s, please remove the current bootloader "
"disk!\\nReboot?"
msgstr "引导程序已克隆到磁盘 %s, 请移除当前引导盘! \\n重启？"

#: menu.sh:1875
msgid ""
"Please via %s to download the logs,\\nAnd go to github to create an issue "
"and upload the logs."
msgstr "请通过 %s 下载日志 logs,\\n并前往 github 创建问题并上传日志 logs."

#: menu.sh:1879
msgid "Please go to github to create an issue and upload the logs."
msgstr "请前往 github 创建问题并上传日志 logs."

#: menu.sh:1883
msgid "\\Z1No logs found!\\Zn\\n\\n"
msgstr "\\Z1日志 logs 未找到!\\Zn\\n\\n"

#: menu.sh:1884
msgid "Please do as follows:\\n"
msgstr "请按如下操作:\\n"

#: menu.sh:1885
msgid " 1. Add dbgutils in addons and rebuild.\\n"
msgstr " 1. 在插件中添加 dbgutils 并重新编译.\\n"

#: menu.sh:1886
msgid " 2. Wait 10 minutes after booting.\\n"
msgstr " 2. 启动后等待10分钟.\\n"

#: menu.sh:1887
msgid " 3. Reboot into RR and go to this option.\\n"
msgstr " 3. 重启到 RR 并回到该选项.\\n"

#: menu.sh:1894
msgid ""
"This option only installs opkg package management, allowing you to install "
"more tools for use and debugging. Do you want to continue?"
msgstr ""
"该选项仅安装 opkg 包管理工具, 使你能够安装更多的工具以供使用和调试, 是否继续?"

#: menu.sh:1901
msgid "opkg installing ..."
msgstr "opkg 安装中 ..."

#: menu.sh:1903
msgid ""
"opkg install is complete. Please reconnect to ssh/web, or execute 'source ~/."
"bashrc'"
msgstr "opkg 安装完成. 请重新链接 ssh/web, 或者执行 'source ~/.bashrc'"

#: menu.sh:1915
msgid "Please enter a proxy server url.(e.g., http://192.168.1.1:7981/)"
msgstr "请输入代理服务器 url.(e.g., http://192.168.1.1:7981/)"

#: menu.sh:1926 menu.sh:1959
msgid "Invalid proxy server url, continue?"
msgstr "无效的代理服务器 url, 是否继续?"

#: menu.sh:1948
msgid "Please enter a proxy server url.(e.g., https://mirror.ghproxy.com/)"
msgstr "请输入代理服务器 url.(e.g., https://mirror.ghproxy.com/)"

#: menu.sh:1973
msgid "It is expected that all restrictions on DSM will be lifted,\\n"
msgstr "预计将解除DSM一切限制,\\n"

#: menu.sh:1974
msgid ""
"But since upgrading is not supported, I don not want to implement it for the "
"time being.\\n"
msgstr "但由于不支持升级, 暂时不想实现.\\n"

#: menu.sh:1986 menu.sh:2021 menu.sh:2028
msgid "Try recovery DSM"
msgstr "尝试恢复 DSM 系统"

#: menu.sh:1987
msgid "Trying to recovery a DSM installed system ..."
msgstr "尝试恢复已安装的 DSM 系统中 ..."

#: menu.sh:2015
msgid "Found a installation:\\nModel: %s\\nProductversion: %s"
msgstr "找到已安装:\\n型号:  %s\\n版本: %s"

#: menu.sh:2019
msgid "\\nSerial: %s"
msgstr "\\nSN: %s"

#: menu.sh:2029
msgid "Unfortunately I couldn't mount the DSM partition!"
msgstr "很遗憾, 我无法挂载 DSM 分区!"

#: menu.sh:2079
msgid "Alert"
msgstr "警告"

#: menu.sh:2080
msgid "Config changed, would you like to rebuild the loader?"
msgstr "配置已更改, 是否重新编译引导?"

#: menu.sh:2092 menu.sh:2473
msgid "Choose a language"
msgstr "选择语言"

#: menu.sh:2106
msgid "Choose a layout"
msgstr "选择布局"

#: menu.sh:2118
msgid "Choice a keymap"
msgstr "选择键盘映射"

#: menu.sh:2137 menu.sh:2190 menu.sh:2241 menu.sh:2308 menu.sh:2313
#: menu.sh:2318 menu.sh:2323 menu.sh:2330 menu.sh:2338 menu.sh:2346
#: menu.sh:2354
msgid "Update %s"
msgstr "更新 %s"

#: menu.sh:2140
msgid "Checking last version ..."
msgstr "检测新版本中 ..."

#: menu.sh:2151 menu.sh:2154
msgid "Error checking new version.\\nError: TAG is %s"
msgstr "检测新版本错误.\\nError: TAG is %s"

#: menu.sh:2161
msgid "No new version."
msgstr "没有新版本."

#: menu.sh:2165
msgid "No new version. Actual version is %s\\nForce update?"
msgstr "没有新版本. 实际版本为 %s\\n强制更新?"

#: menu.sh:2174
msgid "Downloading ..."
msgstr "下载中 ..."

#: menu.sh:2178 menu.sh:2181
msgid "Error downloading new version.\\nError: %d:%d"
msgstr "下载新版本错误.\\nError: %d:%d"

#: menu.sh:2192 menu.sh:2243
msgid "Extracting last version"
msgstr "解压新版本"

#: menu.sh:2196
msgid "Error extracting update file"
msgstr "更新文件解压错误"

#: menu.sh:2203
msgid "Checksum do not match!"
msgstr "Checksum 不匹配!"

#: menu.sh:2212
msgid ""
"The current version does not support upgrading to the latest update.zip. "
"Please remake the bootloader disk!"
msgstr "当前版本不支持最新的 update.zip 升级, 请重新制作引导盘!"

#: menu.sh:2217
msgid "Installing new files ..."
msgstr "安装更新中 ..."

#: menu.sh:2234
msgid "RR updated with success to %s!\\nReboot?"
msgstr "RR 更新成功 %s!\\n重启?"

#: menu.sh:2249
msgid "Installing new %s ..."
msgstr "安装新 %s 中 ..."

#: menu.sh:2278 menu.sh:2281
msgid "%s updated with success!"
msgstr "%s 更新成功!"

#: menu.sh:2293
msgid "Update all"
msgstr "更新全部"

#: menu.sh:2294
msgid "Update RR"
msgstr "更新 RR"

#: menu.sh:2295
msgid "Update addons"
msgstr "更新插件"

#: menu.sh:2296
msgid "Update modules"
msgstr "更新模块"

#: menu.sh:2297
msgid "Update LKMs"
msgstr "更新LKMs"

#: menu.sh:2298
msgid "Local upload"
msgstr "本地上传"

#: menu.sh:2299
msgid "Pre Release:"
msgstr "预发布:"

#: menu.sh:2303
msgid ""
"Manually uploading update.zip,addons.zip,modules.zip,rp-lkms.zip to /tmp/ "
"will skip the download."
msgstr ""
"手动上传 update.zip,addons.zip,modules.zip,rp-lkms.zip 到 /tmp/ 将跳过下载."

#: menu.sh:2308 menu.sh:2338
msgid "addons"
msgstr "插件"

#: menu.sh:2313 menu.sh:2346
msgid "modules"
msgstr "模块"

#: menu.sh:2318 menu.sh:2354
msgid "LKMs"
msgstr "LKMs"

#: menu.sh:2323 menu.sh:2330
msgid "RR"
msgstr "RR"

#: menu.sh:2365
msgid ""
"Or upload update.zip, addons.zip, modules.zip, rp-lkms.zip to /tmp/ via DUFS "
"will skip the download.\\n"
msgstr ""
"或者通过 DUFS 上传 update.zip, addons.zip, modules.zip, rp-lkms.zip 到 /tmp/ "
"将跳过下载.\\n"

#: menu.sh:2371
msgid ""
"Please keep the attachment name consistent with the attachment name on "
"Github.\\n"
msgstr "请保持附件名称与 github 上附件名称一致.\\n"

#: menu.sh:2372
msgid "Upload update*.zip will update RR.\\n"
msgstr "上传 update*.zip 将更新 RR.\\n"

#: menu.sh:2373
msgid "Upload addons*.zip will update Addons.\\n"
msgstr "上传 addons*.zip 将更新 插件.\\n"

#: menu.sh:2374
msgid "Upload modules*.zip will update Modules.\\n"
msgstr "上传 modules*.zip 将更新 模块.\\n"

#: menu.sh:2375
msgid "Upload rp-lkms*.zip will update LKMs.\\n"
msgstr "上传 rp-lkms*.zip 将更新 LKMs.\\n"

#: menu.sh:2430
msgid "This person is very lazy and hasn't written anything."
msgstr "这个人很懒, 什么也没有写."

#: menu.sh:2453
msgid "Choose a model"
msgstr "选择型号"

#: menu.sh:2455
msgid "Choose a version"
msgstr "选择版本"

#: menu.sh:2457
msgid "Parse pat"
msgstr "解析 pat"

#: menu.sh:2459
msgid "Addons menu"
msgstr "插件"

#: menu.sh:2460
msgid "Modules menu"
msgstr "模块"

#: menu.sh:2461
msgid "Cmdline menu"
msgstr "设置 Cmdline"

#: menu.sh:2462
msgid "Synoinfo menu"
msgstr "设置 Synoinfo"

#: menu.sh:2464
msgid "Advanced menu"
msgstr "高级设置"

#: menu.sh:2467
msgid "Build the loader"
msgstr "编译引导"

#: menu.sh:2471
msgid "Boot the loader"
msgstr "启动"

#: menu.sh:2474
msgid "Choose a keymap"
msgstr "选择键盘"

#: menu.sh:2476
msgid "Clean disk cache"
msgstr "清除磁盘缓存"

#: menu.sh:2478
msgid "Update menu"
msgstr "更新"

#: menu.sh:2479
msgid "Notepad"
msgstr "备注"

#: menu.sh:2551
msgid "Choose a action"
msgstr "选择动作"

#: menu.sh:2552
msgid "Poweroff"
msgstr "关机"

#: menu.sh:2553
msgid "Reboot"
msgstr "重启"

#: menu.sh:2554
msgid "Reboot to RR"
msgstr "重启到 RR"

#: menu.sh:2555
msgid "Back to shell"
msgstr "退出到 shell"

#: menu.sh:2581
msgid "Call \\033[1;32mmenu.sh\\033[0m to return to menu"
msgstr "执行 \\033[1;32mmenu.sh\\033[0m 重新进入设置菜单"