# Chinese translations for rr package.
# Copyright (C) 2023 THE rr'S COPYRIGHT HOLDER
# This file is distributed under the same license as the rr package.
# ing <wjz304@qq.com>, 2023.
#
msgid ""
msgstr ""
"Project-Id-Version: rr\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-10-09 17:39+0800\n"
"PO-Revision-Date: 2023-10-09 17:39+0800\n"
"Last-Translator: ing <wjz304@qq.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: boot.sh:8 init.sh:160
msgid "Loader is not configured!"
msgstr "引导未配置!"

#: boot.sh:20 init.sh:41
msgid "Welcome to %s"
msgstr "Welcome to %s"

#: boot.sh:38
msgid "DSM zImage changed"
msgstr "DSM zImage 已更改"

#: boot.sh:41 boot.sh:54 menu.sh:817 menu.sh:825 menu.sh:851 menu.sh:880
#: menu.sh:892 menu.sh:916 menu.sh:924 menu.sh:975 menu.sh:988 menu.sh:995
msgid "Error"
msgstr "错误"

#: boot.sh:42 menu.sh:989
msgid ""
"zImage not patched,\\nPlease upgrade the bootloader version and try again."
"\\nPatch error:\\n"
msgstr "zImage打补丁失败,\\n请升级引导版本并重试.\\nPatch 错误:\\n"

#: boot.sh:51
msgid "DSM Ramdisk changed"
msgstr "DSM Ramdisk 已更改"

#: boot.sh:55 menu.sh:996
msgid ""
"Ramdisk not patched,\\nPlease upgrade the bootloader version and try again."
"\\nPatch error:\\n"
msgstr "Ramdisk打补丁失败,\\n请升级引导版本并重试.\\nPatch 错误:\\n"

#: boot.sh:73
msgid "Model:"
msgstr "型号: "

#: boot.sh:74
msgid "Build:"
msgstr "版本: "

#: boot.sh:75
msgid "LKM:  "
msgstr "LKM:  "

#: boot.sh:76
msgid "DMI:  "
msgstr "DMI:  "

#: boot.sh:77
msgid "CPU:  "
msgstr "CPU:  "

#: boot.sh:78
msgid "MEM:  "
msgstr "MEM:  "

#: boot.sh:81
msgid ""
"The current version of bootloader does not support booting %s-%s, please "
"upgrade and rebuild."
msgstr "当前版本的引导盘不支持引导 %s-%s, 请升级并重新编译."

#: boot.sh:93
msgid ""
"Please insert at least one sata disk for system installation, except for the "
"bootloader disk."
msgstr "除引导盘外, 请至少插入一块 sata 磁盘进行系统安装."

#: boot.sh:142
msgid "Cmdline:\\n"
msgstr "Cmdline:\\n"

#: boot.sh:148
msgid "Reboot to boot directly in DSM"
msgstr "重启并直接进入DSM引导"

#: boot.sh:154 init.sh:173
msgid "Detected %s network cards."
msgstr "检测到 %s 个网卡."

#: boot.sh:155 init.sh:174
msgid "Checking Connect."
msgstr "检查连接."

#: boot.sh:175
msgid "Waiting IP.(For reference only)"
msgstr "获取 IP.(仅供参考)"

#: boot.sh:182 init.sh:199
msgid "DOWN"
msgstr "关闭"

#: boot.sh:186 init.sh:203
msgid "NOT CONNECTED"
msgstr "未连接"

#: boot.sh:190 init.sh:207
msgid "TIMEOUT (Please check the IP on the router.)"
msgstr "超时 (请检查路由器上的IP.)"

#: boot.sh:196
msgid "Access \\033[1;34mhttp://%s:5000\\033[0m to connect the DSM via web."
msgstr "在浏览器中访问 \\033[1;34mhttp://%s:5000\\033[0m 链接 DSM."

#: boot.sh:208
msgid "%2ds (Changing access(ssh/web) status will interrupt boot)"
msgstr "%2ds ((ssh/web)连接状态改变将中断启动)"

#: boot.sh:212
msgid "access(ssh/web) status has changed and booting is interrupted."
msgstr "(ssh/web)连接状态已改变, 启动被中断."

#: boot.sh:222
msgid "Loading DSM kernel..."
msgstr "加载 DSM 内核..."

#: boot.sh:226
msgid "Warning, running kexec with --noefi param, strange things will happen!!"
msgstr "警告, 使用'--noefi'参数运行'kexec', 可能有不好的事情发生!!"

#: boot.sh:231
msgid "Booting..."
msgstr "引导中..."

#: boot.sh:233
msgid ""
"[This interface will not be operational.\\nPlease wait for a few minutes "
"before using the http://find.synology.com/ or Synology Assistant find DSM "
"and connect.]"
msgstr "[该界面已不可操作.\\n请在数分钟后通过 http://find.synology.com/ 或者 Synology Assistant 查找DSM并访问.]"

#: init.sh:17
msgid "Loader disk not found!"
msgstr "未找到引导磁盘!"

#: init.sh:19
msgid "Loader disk seems to be damaged!"
msgstr "引导磁盘似乎已损坏!"

#: init.sh:20
msgid "There are multiple loader disks, please insert only one loader disk!"
msgstr "存在多个引导磁盘，请仅插入一个引导磁盘!"

#: init.sh:32 init.sh:33 init.sh:34
msgid "Can't mount %s"
msgstr "挂载 %s 失败"

#: init.sh:72
msgid "Network devices not found!"
msgstr "未找到网卡!"

#: init.sh:127
msgid "Loader disk neither USB or DoM"
msgstr "引导磁盘仅支持 USB 或者 DoM"

#: init.sh:135
msgid "Loader disk:"
msgstr "引导盘:"

#: init.sh:142
msgid "Resizing %s"
msgstr "重置 %s 大小"

#: init.sh:153
msgid "Loading keymap"
msgstr "加载键盘映射"

#: init.sh:163
msgid "User requested edit settings."
msgstr "用户触发编辑设置."

#: init.sh:192
msgid "Waiting IP."
msgstr "获取 IP."

#: init.sh:213
msgid ""
"Access \\033[1;34mhttp://%s:7681\\033[0m to configure the loader via web "
"terminal."
msgstr "在浏览器中访问 \\033[1;34mhttp://%s:7681\\033[0m 进入WEB终端进行配置."

#: init.sh:223
msgid "Call \\033[1;32mmenu.sh\\033[0m to configure loader"
msgstr "执行 \\033[1;32mmenu.sh\\033[0m 进入设置菜单"

#: init.sh:225
msgid "User config is on"
msgstr "用户配置文件位于"

#: init.sh:226
msgid "Default SSH Root password is"
msgstr "默认SSH的root密码为"

#: init.sh:232
msgid ""
"You have less than 4GB of RAM, if errors occur in loader creation, please "
"increase the amount of memory."
msgstr "您的RAM不足4GB, 如果在创建引导时出现错误，请增加内存."

#: menu.sh:89
msgid "Model"
msgstr "型号"

#: menu.sh:90
msgid "Reading models"
msgstr "读取型号"

#: menu.sh:120
msgid "Disable flags restriction"
msgstr "禁用标志限制"

#: menu.sh:121
msgid "Show all models"
msgstr "显示所有型号"

#: menu.sh:122
msgid "Compatibility judgment"
msgstr "兼容性判断"

#: menu.sh:124
msgid "Choose the model"
msgstr "选择型号"

#: menu.sh:212
msgid "Choose a product version"
msgstr "选择版本"

#: menu.sh:222 menu.sh:228 menu.sh:233 menu.sh:239 menu.sh:265 menu.sh:285
msgid "Product Version"
msgstr "版本"

#: menu.sh:223
msgid ""
"The current version has been set to %s. Do you want to reset the version?"
msgstr "当前版本已设置为%s. 是否要重置版本?"

#: menu.sh:229
msgid ""
"This version does not support UEFI startup, Please select another version or "
"switch the startup mode."
msgstr "该版本不支持UEFI启动, 请选择其他版本或者切换启动模式."

#: menu.sh:234
msgid ""
"This version only support usb startup, Please select another version or "
"switch the startup mode."
msgstr "该版本仅支持 usb 启动, 请选择其他版本或者切换启动模式."

#: menu.sh:240
msgid "Get pat data .."
msgstr "获取pat数据 .."

#: menu.sh:259
msgid ""
"Failed to get pat data,\\nPlease manually fill in the URL and md5sum of the "
"corresponding version of pat."
msgstr "获取pat数据失败,\\n请手动填写相应版本pat的URL和MD5."

#: menu.sh:263
msgid "Successfully to get pat data,\\nPlease confirm or modify as needed."
msgstr "获取pat数据成功,\\n请确认或者按需修改."

#: menu.sh:266
msgid "Retry"
msgstr "重试"

#: menu.sh:286
msgid "Reconfiguring Synoinfo, Addons and Modules"
msgstr "重新配置概要, 插件和模块"

#: menu.sh:329 menu.sh:467 menu.sh:604 menu.sh:721 menu.sh:1826
msgid "Choose a option"
msgstr "选择一个选项"

#: menu.sh:330
msgid "Add an addon"
msgstr "添加插件"

#: menu.sh:331
msgid "Delete addon(s)"
msgstr "删除插件(s)"

#: menu.sh:332
msgid "Show user addons"
msgstr "显示用户插件"

#: menu.sh:333
msgid "Show all available addons"
msgstr "显示所有可用插件"

#: menu.sh:334
msgid "Upload a external addon"
msgstr "上传外部插件"

#: menu.sh:335 menu.sh:472 menu.sh:600 menu.sh:716 menu.sh:1049 menu.sh:1823
#: menu.sh:2001 menu.sh:2073
msgid "Exit"
msgstr "退出"

#: menu.sh:347 menu.sh:352 menu.sh:358 menu.sh:370 menu.sh:378 menu.sh:396
#: menu.sh:410 menu.sh:415 menu.sh:419 menu.sh:433 menu.sh:437 menu.sh:445
#: menu.sh:448
msgid "Addons"
msgstr "插件"

#: menu.sh:348
msgid "No available addons to add"
msgstr "没有可用的插件可添加"

#: menu.sh:353
msgid "Select an addon"
msgstr "选择插件"

#: menu.sh:359
msgid "Type a optional params to addon"
msgstr "输入插件的加载参数"

#: menu.sh:371
msgid "No user addons to remove"
msgstr "没有要删除的用户插件"

#: menu.sh:379
msgid "Select addon to remove"
msgstr "选择要删除的插件"

#: menu.sh:416 menu.sh:1368 menu.sh:1399 menu.sh:1432 menu.sh:1900
msgid "This feature is only available when accessed via web/ssh."
msgstr "此功能仅在通过web/ssh访问时可用."

#: menu.sh:420
msgid "Please upload the *.addons file."
msgstr "请上传 *.addons 文件."

#: menu.sh:434 menu.sh:572 menu.sh:1927 menu.sh:1941
msgid "Not a valid file, please try again!"
msgstr "不是有效的文件, 请重试!"

#: menu.sh:438
msgid "The addon already exists. Do you want to overwrite it?"
msgstr "该插件已存在, 是否覆盖?"

#: menu.sh:446
msgid "Addon '%s' added to loader, Please enable it in 'Add an addon' menu."
msgstr "插件 '%s' 已添加到引导中, 请在'添加插件' 菜单中开启."

#: menu.sh:449
msgid "File format not recognized!"
msgstr "文件格式无法识别!"

#: menu.sh:468
msgid "Show/Select modules"
msgstr "显示/选择模块"

#: menu.sh:469
msgid "Select loaded modules"
msgstr "选择已识别的模块"

#: menu.sh:470
msgid "Upload a external module"
msgstr "上传一个外部模块"

#: menu.sh:471
msgid "Priority use of official drivers:"
msgstr "优先使用官方模块:"

#: menu.sh:478 menu.sh:491 menu.sh:528 menu.sh:548 menu.sh:551 menu.sh:567
#: menu.sh:571
msgid "Modules"
msgstr "模块"

#: menu.sh:479
msgid "Reading modules"
msgstr "读取模块中"

#: menu.sh:492
msgid "Select all"
msgstr "选择全部"

#: menu.sh:493
msgid "Deselect all"
msgstr "取消全选"

#: menu.sh:494
msgid "Select modules to include"
msgstr "选择要加载的插件"

#: menu.sh:529
msgid "Selecting loaded modules"
msgstr "选择已识别的模块"

#: menu.sh:543
msgid ""
"This function is experimental and dangerous. If you don't know much, please "
"exit.\\n"
msgstr "这个功能是实验性的, 很危险. 如果你知道的不多, 请退出. \\n"

#: menu.sh:544
msgid ""
"The imported .ko of this function will be implanted into the corresponding "
"arch's modules package, which will affect all models of the arch.\\n"
msgstr ""
"该功能导入 .ko 将被植入相应的架构的模块包中, 这将影响该架构的所有型号.\\n"

#: menu.sh:545
msgid ""
"This program will not determine the availability of imported modules or even "
"make type judgments, as please double check if it is correct.\\n"
msgstr ""
"该程序不会判断导入的驱动模块的可用性, 甚至不会做类型判断, 因从请你再三确认是"
"否正确.\\n"

#: menu.sh:546
msgid ""
"If you want to remove it, please go to the \"Update Menu\" -> \"Update "
"modules\" to forcibly update the modules. All imports will be reset.\\n"
msgstr ""
"如果您想删除它, 请转到 \"更新\"->\"更新模块\" 强制更新模块, 所有导入都将被重"
"置.\\n"

#: menu.sh:547
msgid "Do you want to continue?"
msgstr "是否继续?"

#: menu.sh:552
msgid "Please upload the *.ko file."
msgstr "请上传 *.ko 文件."

#: menu.sh:568
msgid "Module '%s' added to %s-%s"
msgstr "模块 '%s' 已添加到 %s-%s"

#: menu.sh:593
msgid "Add/edit a cmdline item"
msgstr "添加/编辑cmdline参数"

#: menu.sh:594
msgid "Delete cmdline item(s)"
msgstr "删除cmdline参数(s)"

#: menu.sh:596
msgid "Define SN/MAC"
msgstr "自定义 SN/MAC"

#: menu.sh:598
msgid "Show user added cmdline"
msgstr "显示用户添加的cmdline参数"

#: menu.sh:599
msgid "Show model inherent cmdline"
msgstr "显示型号默认的cmdline参数"

#: menu.sh:609 menu.sh:615 menu.sh:625 menu.sh:633 menu.sh:649 menu.sh:659
#: menu.sh:688 menu.sh:696
msgid "Cmdline"
msgstr "Cmdline"

#: menu.sh:610
msgid "Type a name of cmdline"
msgstr "输入参数的名称"

#: menu.sh:616
msgid "Type a value of '%s' cmdline"
msgstr "输入 '%s' 参数的值"

#: menu.sh:626
msgid "No user cmdline to remove"
msgstr "没有用户参数被删除"

#: menu.sh:634
msgid "Select cmdline to remove"
msgstr "选择要删除的参数"

#: menu.sh:645
msgid "Note: (MAC will not be set to NIC)"
msgstr "注意: (MAC 不会设置到 NIC)"

#: menu.sh:650
msgid "Random"
msgstr "随机"

#: menu.sh:660
msgid "Invalid SN/MAC, retry?"
msgstr "无效 SN/MAC, 重试?"

#: menu.sh:713
msgid "Add/edit a synoinfo item"
msgstr "添加/编辑Synoinfo参数"

#: menu.sh:714
msgid "Delete synoinfo item(s)"
msgstr "删除Synoinfo参数(s)"

#: menu.sh:715
msgid "Show synoinfo entries"
msgstr "显示Synoinfo参数"

#: menu.sh:726 menu.sh:732 menu.sh:743 menu.sh:751 menu.sh:768
msgid "Synoinfo"
msgstr "Synoinfo"

#: menu.sh:727
msgid "Type a name of synoinfo entry"
msgstr "输入参数的名称"

#: menu.sh:733
msgid "Type a value of '%s' synoinfo entry"
msgstr "输入 '%s' 参数的值"

#: menu.sh:744
msgid "No synoinfo entries to remove"
msgstr "没有Synoinfo参数被删除"

#: menu.sh:752
msgid "Select synoinfo entry to remove"
msgstr "选择要删除的参数"

#: menu.sh:791
msgid "%s cached."
msgstr "%s 已缓存."

#: menu.sh:795
msgid "Cleaning cache"
msgstr "清除缓存"

#: menu.sh:802
msgid ""
"Based on the current network situation, switch to %s mirror to downloading."
msgstr "根据当前的网络状况, 已切换到 %s 镜像服务器进行下载."

#: menu.sh:806
msgid "Downloading %s"
msgstr "下载 %s 中"

#: menu.sh:816 menu.sh:879
msgid "Check internet or cache disk space.\\nError: %d"
msgstr "请检查网络连接或磁盘空间.\\nError: %d"

#: menu.sh:823
msgid "Checking hash of %s: "
msgstr "检查 %s 的 hash: "

#: menu.sh:826
msgid "md5 hash of pat not match, Please reget pat data from the version menu and try again!"
msgstr "pat 的 md5 Hash值 不匹配, 请在版本菜单中重新获取pat数据后重试!"

#: menu.sh:830 menu.sh:933 menu.sh:943
msgid "OK"
msgstr "OK"

#: menu.sh:834
msgid "Disassembling %s: "
msgstr "解压 %s: "

#: menu.sh:839
msgid "Uncompressed tar"
msgstr "未压缩tar"

#: menu.sh:843
msgid "Compressed tar"
msgstr "压缩tar"

#: menu.sh:847
msgid "Encrypted"
msgstr "已加密"

#: menu.sh:852
msgid ""
"Could not determine if pat file is encrypted or not, maybe corrupted, try "
"again!"
msgstr "无法确定pat文件是否加密, 可能已损坏, 请重试!"

#: menu.sh:862
msgid "Extractor cached."
msgstr "已存在解密程序."

#: menu.sh:869
msgid "Downloading old pat to extract synology .pat extractor..."
msgstr "下载旧 pat, 提取 .pat 解密程序中..."

#: menu.sh:910 menu.sh:913
msgid "Extracting..."
msgstr "解压中..."

#: menu.sh:925
msgid "pat Invalid, try again!"
msgstr "无效的 pat, 请重试!"

#: menu.sh:928
msgid "Setting hash: "
msgstr "设置 hash: "

#: menu.sh:935
msgid "Copying files: "
msgstr "拷贝文件: "

#: menu.sh:976
msgid "Addon %s not found!"
msgstr "插件 %s 未找到!"

#: menu.sh:1002 menu.sh:2052
msgid "Cleaning"
msgstr "清除中"

#: menu.sh:1004
msgid "Ready!"
msgstr "已就绪!"

#: menu.sh:1017
msgid "Switch LKM version:"
msgstr "选择LKM版本:"

#: menu.sh:1020
msgid "Switch direct boot:"
msgstr "切换直接启动:"

#: menu.sh:1022
msgid "Timeout of get ip in boot:"
msgstr "启动时获取IP的超时时间:"

#: menu.sh:1023
msgid "Timeout of boot wait:"
msgstr "启动超时时间:"

#: menu.sh:1024
msgid "kernel switching method:"
msgstr "内核切换的方式:"

#: menu.sh:1025
msgid "Reboot on kernel panic:"
msgstr "内核恐慌时重新启动:"

#: menu.sh:1028
msgid "Set static IP"
msgstr "设置静态 IP"

#: menu.sh:1029
msgid "Edit user config file manually"
msgstr "手动编辑用户配置文件"

#: menu.sh:1030
msgid "Edit grub.cfg file manually"
msgstr "手动编辑 grub.cfg 文件"

#: menu.sh:1031
msgid "Try to recovery a DSM installed system"
msgstr "尝试恢复已安装DSM的系统"

#: menu.sh:1032
msgid "Show SATA(s) # ports and drives"
msgstr "显示SATA(s) # 端口和驱动器"

#: menu.sh:1034
msgid "show/modify the current pat data"
msgstr "显示/修改当前pat下载链接"

#: menu.sh:1036
msgid "Allow downgrade installation"
msgstr "允许降级安装"

#: menu.sh:1037
msgid "Format disk(s) # Without loader disk"
msgstr "格式化磁盘(s) # 不含启动盘"

#: menu.sh:1038
msgid "Reset DSM system password"
msgstr "重置 DSM 系统密码"

#: menu.sh:1039
msgid "Save modifications of '/opt/rr'"
msgstr "保存'/opt/rr'的修改"

#: menu.sh:1041
msgid "Custom dts file # Need rebuild"
msgstr "自定义 dts 文件 # 需要重新编译"

#: menu.sh:1044
msgid "Backup bootloader disk # test"
msgstr "备份启动盘 # 测试"

#: menu.sh:1045
msgid "Restore bootloader disk # test"
msgstr "恢复启动盘 # 测试"

#: menu.sh:1047
msgid "Install development tools"
msgstr "安装开发者工具"

#: menu.sh:1048
msgid "Show dsm logo:"
msgstr "显示 dsm logo:"

#: menu.sh:1051 menu.sh:1069 menu.sh:1081 menu.sh:1101 menu.sh:1124
#: menu.sh:1148 menu.sh:1212 menu.sh:1219 menu.sh:1237 menu.sh:1250
#: menu.sh:1253 menu.sh:1263 menu.sh:1264 menu.sh:1269 menu.sh:1273
#: menu.sh:1284 menu.sh:1286 menu.sh:1303 menu.sh:1308 menu.sh:1316
#: menu.sh:1322 menu.sh:1335 menu.sh:1338 menu.sh:1344 menu.sh:1347
#: menu.sh:1362 menu.sh:1367 menu.sh:1371 menu.sh:1386 menu.sh:1391
#: menu.sh:1398 menu.sh:1402 menu.sh:1405 menu.sh:1410 menu.sh:1420
#: menu.sh:1425 menu.sh:1431 menu.sh:1435 menu.sh:1452 menu.sh:1455
#: menu.sh:1461 menu.sh:1469 menu.sh:1477 menu.sh:1486 menu.sh:1488
msgid "Advanced"
msgstr "高级"

#: menu.sh:1052
msgid "Advanced option"
msgstr "高级设置"

#: menu.sh:1070 menu.sh:1082 menu.sh:1102
msgid "Choose a time(seconds)"
msgstr "选择一个时间(秒)"

#: menu.sh:1112
msgid "Temporary IP: (UI will not refresh)"
msgstr "临时 IP: (UI 不会刷新)"

#: menu.sh:1149
msgid "Setting IP ..."
msgstr "设置 IP.."

#: menu.sh:1210
msgid "\\nTotal of ports: %s\\n"
msgstr "\\n端口总数: %s\\n"

#: menu.sh:1211
msgid ""
"\\nPorts with color \\Z1red\\Zn as DUMMY, color \\Z2\\Zbgreen\\Zn has drive "
"connected."
msgstr "\\n\\Z1红色\\Zn 为模拟端口, \\Z2\\Zb绿色\\Zn 为已驱动的物理端口."

#: menu.sh:1218
msgid "pat: (editable)"
msgstr "pat: (可编辑)"

#: menu.sh:1234
msgid ""
"This feature will allow you to downgrade the installation by removing the "
"VERSION file from the first partition of all disks.\\n"
msgstr "此功能通过删除所有磁盘的第一个分区的VERSION文件来允许你降级安装.\\n"

#: menu.sh:1235
msgid "Therefore, please insert all disks before continuing.\\n"
msgstr "因此, 请插入所有磁盘后再进行操作.\\n"

#: menu.sh:1236 menu.sh:1270
msgid ""
"Warning:\\nThis operation is irreversible. Please backup important data. Do "
"you want to continue?"
msgstr "警告:\\n该操作不可逆, 请提前备份重要数据. 是否继续?"

#: menu.sh:1251
msgid "Removing ..."
msgstr "删除中..."

#: menu.sh:1252
msgid "Remove VERSION file for all disks completed."
msgstr "已移除所有磁盘的 VERSION 文件."

#: menu.sh:1274
msgid ""
"Warning:\\nThe current hds is in raid, do you still want to format them?"
msgstr "警告:\\n当前的硬盘处于raid中，是否仍要格式化?"

#: menu.sh:1285
msgid "Formatting ..."
msgstr "格式化中..."

#: menu.sh:1287
msgid "Formatting is complete."
msgstr "格式化完成."

#: menu.sh:1304
msgid "The installed Syno system not found in the currently inserted disks!"
msgstr "未在当前插入的硬盘中找到已安装的syno系统!"

#: menu.sh:1309
msgid "Choose a user name"
msgstr "选择一个用户"

#: menu.sh:1317
msgid "Type a new password for user '%s'"
msgstr "输入用户 '%s' 的新密码"

#: menu.sh:1323
msgid "Invalid password"
msgstr "无效密码"

#: menu.sh:1336
msgid "Resetting ..."
msgstr "重置中 ..."

#: menu.sh:1339
msgid "Password reset completed."
msgstr "重置密码完成."

#: menu.sh:1345 menu.sh:1403 menu.sh:1456
msgid ""
"Warning:\\nDo not terminate midway, otherwise it may cause damage to the "
"RR. Do you want to continue?"
msgstr "警告:\\n请不要中途停止, 否则将导致RR引导损毁, 是否继续?"

#: menu.sh:1348
msgid "Saving ..."
msgstr "保存中..."

#: menu.sh:1363
msgid "Save is complete."
msgstr "保存完成."

#: menu.sh:1372
msgid ""
"Currently, only dts format files are supported. Please prepare and click to "
"confirm uploading.\\n(saved in /mnt/p3/users/)"
msgstr ""
"目前, 只支持dts格式的文件, 请准备并点击确认上传.\\n(保存于 /mnt/p3/users/ 中)"

#: menu.sh:1387
msgid "Not a valid dts file, please try again!"
msgstr "dts 文件无效, 请重试!"

#: menu.sh:1392
msgid "A valid dts file, Automatically import at compile time."
msgstr "dts 文件有效, 将在编译时自动导入."

#: menu.sh:1406
msgid "Backuping..."
msgstr "备份中..."

#: menu.sh:1411
msgid ""
"Failed to generate backup. There may be insufficient memory. Please clear "
"the cache and try again!"
msgstr "生成备份失败, 可能内存不足, 请清除缓存重试!"

#: menu.sh:1418
msgid "Click on the address above to download."
msgstr "点击上面的地址下载."

#: menu.sh:1419
msgid ""
"Please confirm the completion of the download before closing this window."
msgstr "请确认下载完成再关闭此窗口."

#: menu.sh:1426
msgid "backup is complete."
msgstr "备份完成."

#: menu.sh:1436
msgid ""
"Please upload the backup file.\\nCurrently, zip(github) and img.gz(backup) "
"compressed file formats are supported."
msgstr "请上传备份的文件\\n当前支持 zip(github) 和 img.gz(backup) 格式."

#: menu.sh:1453
msgid "Not a valid .zip/.img.gz file, please try again!"
msgstr "不是有效的.zip/.img.gz文件, 请重试!"

#: menu.sh:1462
msgid "Writing..."
msgstr "写入中..."

#: menu.sh:1470
msgid "Restore bootloader disk with success to %s!\\nReboot?"
msgstr "成功恢复启动盘到 %s!\\n重启?"

#: menu.sh:1478
msgid ""
"This option only installs opkg package management, allowing you to install "
"more tools for use and debugging. Do you want to continue?"
msgstr ""
"该选项仅安装 opkg 包管理工具, 使你能够安装更多的工具以供使用和调试, 是否继续?"

#: menu.sh:1487
msgid "opkg installing ..."
msgstr "opkg 安装中 ..."

#: menu.sh:1489
msgid ""
"opkg install is complete. Please reconnect to SSH/web, or execute 'source ~/."
"bashrc'"
msgstr "opkg 安装完成. 请重新链接 SSH/web, 或者执行 'source ~/.bashrc'"

#: menu.sh:1504 menu.sh:1541 menu.sh:1548
msgid "Try recovery DSM"
msgstr "尝试恢复DSM系统"

#: menu.sh:1505
msgid "Trying to recovery a DSM installed system"
msgstr "尝试恢复已安装的DSM系统中"

#: menu.sh:1531
msgid "Found a installation:\\nModel: %s\\nProductversion: %s"
msgstr "找到已安装:\\n型号:  %s\\n版本: %s"

#: menu.sh:1535
msgid "\\nSerial: %s"
msgstr "\\nSN: %s"

#: menu.sh:1549
msgid "Unfortunately I couldn't mount the DSM partition!"
msgstr "很遗憾, 我无法挂载DSM分区!"

#: menu.sh:1557 menu.sh:1563 menu.sh:1586
msgid "Edit with caution"
msgstr "请谨慎编辑"

#: menu.sh:1597
msgid "Alert"
msgstr "警告"

#: menu.sh:1598
msgid "Config changed, would you like to rebuild the loader?"
msgstr "配置已更改, 是否重新编译引导?"

#: menu.sh:1610 menu.sh:1994
msgid "Choose a language"
msgstr "选择语言"

#: menu.sh:1624
msgid "Choose a layout"
msgstr "选择布局"

#: menu.sh:1636
msgid "Choice a keymap"
msgstr "选择键盘映射"

#: menu.sh:1655 menu.sh:1708 menu.sh:1759 menu.sh:1831 menu.sh:1834
#: menu.sh:1837 menu.sh:1840 menu.sh:1847 menu.sh:1854 menu.sh:1861
#: menu.sh:1868
msgid "Update %s"
msgstr "更新 %s"

#: menu.sh:1658
msgid "Checking last version"
msgstr "检测新版本中"

#: menu.sh:1671 menu.sh:1674
msgid "Error checking new version"
msgstr "检测新版本错误"

#: menu.sh:1681
msgid "No new version."
msgstr "没有新版本."

#: menu.sh:1685
msgid "No new version. Actual version is %s\\nForce update?"
msgstr "没有新版本. 实际版本为 %s\\n强制更新?"

#: menu.sh:1690
msgid "Downloading last version"
msgstr "下载新版本中"

#: menu.sh:1696 menu.sh:1699
msgid "Error downloading new version"
msgstr "下载新版本错误"

#: menu.sh:1710 menu.sh:1761
msgid "Extracting last version"
msgstr "解压新版本"

#: menu.sh:1714
msgid "Error extracting update file"
msgstr "更新文件解压错误"

#: menu.sh:1721
msgid "Checksum do not match!"
msgstr "Checksum不匹配!"

#: menu.sh:1730
msgid ""
"The current version does not support upgrading to the latest update.zip. "
"Please remake the bootloader disk!"
msgstr "当前版本不支持最新的update.zip升级, 请重新制作引导盘!"

#: menu.sh:1735
msgid "Installing new files"
msgstr "安装更新中"

#: menu.sh:1752
msgid "RR updated with success to %s!\\nReboot?"
msgstr "RR更新成功 %s!\\n重启?"

#: menu.sh:1767
msgid "Installing new %s"
msgstr "安装新 %s 中"

#: menu.sh:1796 menu.sh:1799
msgid "%s updated with success!"
msgstr "%s 更新成功!"

#: menu.sh:1813
msgid "Update all"
msgstr "更新所有"

#: menu.sh:1814
msgid "Update RR"
msgstr "更新RR"

#: menu.sh:1815
msgid "Update addons"
msgstr "更新插件"

#: menu.sh:1816
msgid "Update modules"
msgstr "更新模块"

#: menu.sh:1817
msgid "Update LKMs"
msgstr "更新LKMs"

#: menu.sh:1819
msgid "Set proxy server"
msgstr "设置代理"

#: menu.sh:1821
msgid "Local upload"
msgstr "本地上传"

#: menu.sh:1822
msgid "Pre Release:"
msgstr "预发布: "

#: menu.sh:1831 menu.sh:1854
msgid "addons"
msgstr "插件"

#: menu.sh:1834 menu.sh:1861
msgid "modules"
msgstr "模块"

#: menu.sh:1837 menu.sh:1868
msgid "LKMs"
msgstr "LKMs"

#: menu.sh:1840 menu.sh:1847
msgid "RR"
msgstr "RR"

#: menu.sh:1877 menu.sh:1888 menu.sh:1899 menu.sh:1909 menu.sh:1926
#: menu.sh:1940
msgid "Update"
msgstr "更新"

#: menu.sh:1878
msgid "Please enter a proxy server url"
msgstr "请输入代理服务器url"

#: menu.sh:1889
msgid "Invalid proxy server url, continue?"
msgstr "无效的代理服务器url, 是否继续?"

#: menu.sh:1904
msgid ""
"Please keep the attachment name consistent with the attachment name on "
"Github.\\n"
msgstr "请保持附件名称与 github 上附件名称一致.\\n"

#: menu.sh:1905
msgid "Upload update.zip will update RR.\\n"
msgstr "上传 update.zip 将更新 RR.\\n"

#: menu.sh:1906
msgid "Upload addons.zip will update Addons.\\n"
msgstr "上传 addons.zip 将更新 插件.\\n"

#: menu.sh:1907
msgid "Upload modules.zip will update Modules.\\n"
msgstr "上传 modules.zip 将更新 模块.\\n"

#: menu.sh:1908
msgid "Upload rp-lkms.zip will update LKMs.\\n"
msgstr "上传 rp-lkms.zip 将更新 LKMs.\\n"

#: menu.sh:1957
msgid "This person is very lazy and hasn't written anything."
msgstr "这个人很懒, 什么也没有写."

#: menu.sh:1958
msgid "Edit"
msgstr "编辑"

#: menu.sh:1975
msgid "Choose a model"
msgstr "选择型号"

#: menu.sh:1977
msgid "Choose a version"
msgstr "选择版本"

#: menu.sh:1979
msgid "Addons menu"
msgstr "插件"

#: menu.sh:1980
msgid "Modules menu"
msgstr "模块"

#: menu.sh:1981
msgid "Cmdline menu"
msgstr "设置Cmdline"

#: menu.sh:1982
msgid "Synoinfo menu"
msgstr "设置Synoinfo"

#: menu.sh:1985
msgid "Advanced menu"
msgstr "高级设置"

#: menu.sh:1988
msgid "Build the loader"
msgstr "编译引导"

#: menu.sh:1992
msgid "Boot the loader"
msgstr "启动"

#: menu.sh:1995
msgid "Choose a keymap"
msgstr "选择键盘"

#: menu.sh:1997
msgid "Clean disk cache"
msgstr "清除磁盘缓存"

#: menu.sh:1999
msgid "Update menu"
msgstr "更新"

#: menu.sh:2000
msgid "Notepad"
msgstr "备注"

#: menu.sh:2004
msgid "Main menu"
msgstr "主菜单"

#: menu.sh:2068
msgid "Choose a action"
msgstr "选择动作"

#: menu.sh:2069
msgid "Poweroff"
msgstr "关机"

#: menu.sh:2070
msgid "Reboot"
msgstr "重启"

#: menu.sh:2071
msgid "Reboot to RR"
msgstr "重启到RR"

#: menu.sh:2072
msgid "Back to shell"
msgstr "退出到shell"

#: menu.sh:2098
msgid "Call \\033[1;32mmenu.sh\\033[0m to return to menu"
msgstr "执行 \\033[1;32mmenu.sh\\033[0m 重新进入设置菜单"