# Chinese translations for RR package. # Copyright (C) 2023 THE RR'S COPYRIGHT HOLDER # This file is distributed under the same license as the RR package. # Ing , 2023. # msgid "" msgstr "" "Project-Id-Version: RR\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2024-02-18 21:57+0800\n" "PO-Revision-Date: 2024-02-18 21:58+0800\n" "Last-Translator: Ing \n" "Language-Team: Chinese (simplified) \n" "Language: zh_CN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: Poedit 3.4.2\n" #: boot.sh:8 init.sh:9 menu.sh:9 msgid "Loader is not init!" msgstr "引导未初始化!" #: boot.sh:10 init.sh:110 msgid "Loader is not configured!" msgstr "引导未配置!" #: boot.sh:20 init.sh:14 msgid "Welcome to %s" msgstr "Welcome to %s" #: boot.sh:33 msgid "DSM zImage changed" msgstr "DSM zImage 已更改" #: boot.sh:36 menu.sh:1233 msgid "" "zImage not patched,\\nPlease upgrade the bootloader version and try again." "\\nPatch error:\\n" msgstr "zImage 打补丁失败,\\n请升级引导版本并重试.\\nPatch 错误:\\n" #: boot.sh:44 msgid "DSM Ramdisk changed" msgstr "DSM Ramdisk 已更改" #: boot.sh:47 menu.sh:1239 msgid "" "Ramdisk not patched,\\nPlease upgrade the bootloader version and try again." "\\nPatch error:\\n" msgstr "Ramdisk 打补丁失败,\\n请升级引导版本并重试.\\nPatch 错误:\\n" #: boot.sh:65 msgid "Model: " msgstr "型号: " #: boot.sh:66 msgid "Version: " msgstr "版本: " #: boot.sh:67 msgid "Kernel: " msgstr "内核: " #: boot.sh:68 msgid "LKM: " msgstr "LKM: " #: boot.sh:69 msgid "DMI: " msgstr "DMI: " #: boot.sh:70 msgid "CPU: " msgstr "CPU: " #: boot.sh:71 msgid "MEM: " msgstr "MEM: " #: boot.sh:74 msgid "" "The current version of bootloader does not support booting %s-%s, please " "upgrade and rebuild." msgstr "当前版本的引导盘不支持引导 %s-%s, 请升级并重新编译." #: boot.sh:86 msgid "" "Please insert at least one sata/scsi disk for system installation, except " "for the bootloader disk." msgstr "除引导盘外, 请至少插入一块 sata/scsi 磁盘进行系统安装." #: boot.sh:165 msgid "Cmdline:\\n" msgstr "Cmdline:\\n" #: boot.sh:171 msgid "Reboot to boot directly in DSM" msgstr "重启并直接进入 DSM 引导" #: boot.sh:177 init.sh:123 msgid "Detected %s network cards." msgstr "检测到 %s 个网卡." #: boot.sh:178 init.sh:124 msgid "Checking Connect." msgstr "检查连接." #: boot.sh:198 msgid "Waiting IP.(For reference only)" msgstr "获取 IP.(仅供参考)" #: boot.sh:205 init.sh:149 msgid "DOWN" msgstr "关闭" #: boot.sh:209 init.sh:153 msgid "NOT CONNECTED" msgstr "未连接" #: boot.sh:213 init.sh:157 msgid "TIMEOUT (Please check the IP on the router.)" msgstr "超时 (请检查路由器上的IP.)" #: boot.sh:219 msgid "Access \\033[1;34mhttp://%s:5000\\033[0m to connect the DSM via web." msgstr "在浏览器中访问 \\033[1;34mhttp://%s:5000\\033[0m 链接 DSM." #: boot.sh:231 msgid "%2ds (Changing access(ssh/web) status will interrupt boot)" msgstr "%2ds ((ssh/web)连接状态改变将中断启动)" #: boot.sh:235 msgid "access(ssh/web) status has changed and booting is interrupted." msgstr "(ssh/web)连接状态已改变, 启动被中断." #: boot.sh:245 msgid "Loading DSM kernel ..." msgstr "加载 DSM 内核 ..." #: boot.sh:261 msgid "Warning, running kexec with --noefi param, strange things will happen!!" msgstr "警告, 使用'--noefi'参数运行'kexec', 可能有不好的事情发生!!" #: boot.sh:266 msgid "Booting ..." msgstr "引导中 ..." #: boot.sh:268 msgid "" "[This interface will not be operational. Please wait a few minutes.\\nFind " "DSM via http://find.synology.com/ or Synology Assistant and connect.]" msgstr "" "[该界面已不可操作. 请在数分钟后\\n通过 http://find.synology.com/ 或者 " "Synology Assistant 查找 DSM 并访问.]" #: init.sh:23 msgid "Network devices not found!" msgstr "未找到网卡!" #: init.sh:87 msgid "Loader disk neither USB or SATA/SCSI/NVME/MMC DoM" msgstr "引导磁盘仅支持 USB 或者 SATA/SCSI/NVME/MMC DoM" #: init.sh:95 msgid "Loader disk:" msgstr "引导盘:" #: init.sh:103 msgid "Loading keymap" msgstr "加载键盘映射" #: init.sh:113 msgid "User requested edit settings." msgstr "用户触发编辑设置." #: init.sh:142 msgid "Waiting IP." msgstr "获取 IP." #: init.sh:163 msgid "" "Access \\033[1;34mhttp://%s:7681\\033[0m to configure the loader via web " "terminal." msgstr "" "在浏览器中访问 \\033[1;34mhttp://%s:7681\\033[0m 进入 WEB 终端进行配置." #: init.sh:173 msgid "Call \\033[1;32mmenu.sh\\033[0m to configure loader" msgstr "执行 \\033[1;32mmenu.sh\\033[0m 进入设置菜单" #: init.sh:175 msgid "User config is on" msgstr "用户配置文件位于" #: init.sh:176 msgid "TTYD: \\033[1;34mhttp://rr:7681/\\033[0m" msgstr "TTYD: \\033[1;34mhttp://rr:7681/\\033[0m" #: init.sh:177 msgid "DUFS: \\033[1;34mhttp://rr:7304/\\033[0m" msgstr "DUFS: \\033[1;34mhttp://rr:7304/\\033[0m" #: init.sh:178 msgid "TTYD&DUFS: \\033[1;34mhttp://rr:80/\\033[0m" msgstr "TTYD&DUFS: \\033[1;34mhttp://rr:80/\\033[0m" #: init.sh:180 msgid "Default SSH Root password is" msgstr "默认 SSH 的 root 密码为" #: init.sh:197 msgid "" "You have less than 4GB of RAM, if errors occur in loader creation, please " "increase the amount of memory." msgstr "您的 RAM 不足 4GB, 如果在创建引导时出现错误, 请增加内存." #: menu.sh:102 menu.sh:136 menu.sh:179 msgid "Model" msgstr "型号" #: menu.sh:103 msgid "Reading models" msgstr "读取型号" #: menu.sh:113 msgid "Compatibility judgment" msgstr "兼容性判断" #: menu.sh:134 msgid "Disable flags restriction" msgstr "禁用标志限制" #: menu.sh:135 msgid "Show all models" msgstr "显示所有型号" #: menu.sh:137 msgid "Choose the model" msgstr "选择型号" #: menu.sh:229 menu.sh:240 menu.sh:246 menu.sh:257 menu.sh:283 menu.sh:303 #: menu.sh:353 msgid "Product Version" msgstr "版本" #: menu.sh:230 msgid "Choose a product version" msgstr "选择版本" #: menu.sh:241 msgid "" "The current version has been set to %s. Do you want to reset the version?" msgstr "当前版本已设置为 %s. 是否要重置版本?" #: menu.sh:247 msgid "" "This version does not support UEFI startup, Please select another version or " "switch the startup mode." msgstr "该版本不支持 UEFI 启动, 请选择其他版本或者切换启动模式." #: menu.sh:258 msgid "Get pat data ..." msgstr "获取 pat 数据 ..." #: menu.sh:277 msgid "" "Failed to get pat data,\\nPlease manually fill in the URL and md5sum of the " "corresponding version of pat." msgstr "获取 pat 数据失败,\\n请手动填写相应版本 pat 的 URL 和 MD5." #: menu.sh:281 msgid "Successfully to get pat data,\\nPlease confirm or modify as needed." msgstr "获取 pat 数据成功,\\n请确认或者按需修改." #: menu.sh:284 msgid "Retry" msgstr "重试" #: menu.sh:304 menu.sh:406 msgid "Reconfiguring Synoinfo, Addons and Modules" msgstr "重新配置 Syninfo, 插件和模块" #: menu.sh:338 msgid "" "You have selected the %s and %s.\\n'Parse Pat' will overwrite the previous " "selection.\\nDo you want to continue?" msgstr "你已经选择了 %s 和 %s.\\n‘解析 Pat' 将覆盖之前的选择.\\n是否继续?" #: menu.sh:339 msgid "Parse Pat" msgstr "解析 Pat" #: menu.sh:347 msgid "No pat file found in users folder!\\n" msgstr "在用户文件夹中找不到 pat 文件!\\n" #: menu.sh:348 msgid "" "Please upload the pat file to /mnt/p3/users/ folder via DUFS and re-enter " "this option.\\n" msgstr "" "请通过 DUFS 将 pat 文件上传到 /mnt/p3/users/ 文件夹,然后重新输入此选项.\\n" #: menu.sh:349 menu.sh:359 menu.sh:2401 menu.sh:2475 menu.sh:2486 menu.sh:2503 #: menu.sh:2528 msgid "Update" msgstr "更新" #: menu.sh:354 msgid "Choose a pat file" msgstr "选择一个 pat 文件" #: menu.sh:360 menu.sh:372 menu.sh:1120 msgid "pat Invalid, try again!" msgstr "无效的 pat, 请重试!" #: menu.sh:365 msgid "Parse %s ..." msgstr "解析 %s ..." #: menu.sh:390 msgid "Currently, %s is not supported." msgstr "目前,不支持 %s." #: menu.sh:402 msgid "Currently, %s of %s is not supported." msgstr "目前,不支持 %s-%s." #: menu.sh:463 menu.sh:1249 menu.sh:2609 menu.sh:2627 msgid "Main menu" msgstr "主菜单" #: menu.sh:464 menu.sh:1250 msgid "Making ..." msgstr "编译中 ..." #: menu.sh:466 menu.sh:1252 msgid "Error" msgstr "错误" #: menu.sh:499 menu.sh:516 menu.sh:521 menu.sh:527 menu.sh:538 menu.sh:546 #: menu.sh:569 menu.sh:576 menu.sh:580 menu.sh:594 menu.sh:598 menu.sh:606 #: menu.sh:609 msgid "Addons" msgstr "插件" #: menu.sh:500 menu.sh:630 menu.sh:806 menu.sh:941 menu.sh:2610 msgid "Choose a option" msgstr "选择一个选项" #: menu.sh:501 msgid "Add an addon" msgstr "添加插件" #: menu.sh:502 msgid "Delete addons" msgstr "删除插件" #: menu.sh:503 msgid "Show all addons" msgstr "显示所有插件" #: menu.sh:504 msgid "Upload a external addon" msgstr "上传外部插件" #: menu.sh:505 menu.sh:637 menu.sh:804 menu.sh:939 menu.sh:1310 menu.sh:2399 #: menu.sh:2607 menu.sh:2702 msgid "Exit" msgstr "退出" #: menu.sh:517 msgid "No available addons to add" msgstr "没有可用的插件可添加" #: menu.sh:522 msgid "Select an addon" msgstr "选择插件" #: menu.sh:528 msgid "Type a optional params to addon" msgstr "输入插件的加载参数" #: menu.sh:539 msgid "No user addons to remove" msgstr "没有要删除的用户插件" #: menu.sh:547 msgid "Select addon to remove" msgstr "选择要删除的插件" #: menu.sh:560 msgid "" "Name with color \"\\Z4blue\\Zn\" have been added, with color \"black\" are " "not added.\\n\\n" msgstr "名称颜色为\"\\Z4蓝色\\Zn\"的为已添加, 颜色为\"黑色\"的为未添加.\\n\\n" #: menu.sh:575 menu.sh:709 menu.sh:1766 menu.sh:2473 msgid "" "This feature is only available when accessed via ssh (Requires a terminal " "that supports ZModem protocol).\\n" msgstr "此功能仅在通过 ssh 访问时可用(需要支持 ZModem 协议的终端).\\n" #: menu.sh:581 msgid "Please upload the *.addons file." msgstr "请上传 *.addons 文件." #: menu.sh:595 menu.sh:744 menu.sh:2504 menu.sh:2529 msgid "Not a valid file, please try again!" msgstr "不是有效的文件, 请重试!" #: menu.sh:599 msgid "The addon already exists. Do you want to overwrite it?" msgstr "该插件已存在, 是否覆盖?" #: menu.sh:607 msgid "Addon '%s' added to loader, Please enable it in 'Add an addon' menu." msgstr "插件 '%s' 已添加到引导中, 请在'添加插件' 菜单中开启." #: menu.sh:610 msgid "File format not recognized!" msgstr "文件格式无法识别!" #: menu.sh:629 menu.sh:643 menu.sh:656 menu.sh:693 menu.sh:710 menu.sh:720 #: menu.sh:723 menu.sh:739 menu.sh:743 menu.sh:757 menu.sh:763 msgid "Modules" msgstr "模块" #: menu.sh:631 msgid "Show/Select modules" msgstr "显示/选择模块" #: menu.sh:632 msgid "Select loaded modules" msgstr "选择已识别的模块" #: menu.sh:633 msgid "Upload a external module" msgstr "上传一个外部模块" #: menu.sh:634 msgid "Deselect i915 with dependencies" msgstr "取消选择 i915 及其依赖模块" #: menu.sh:635 msgid "Priority use of official drivers:" msgstr "优先使用官方模块:" #: menu.sh:636 msgid "Edit modules that need to be copied to DSM" msgstr "编辑需要拷贝到 DSM 的模块" #: menu.sh:644 msgid "Reading modules ..." msgstr "读取模块中 ..." #: menu.sh:657 msgid "Select all" msgstr "选择全部" #: menu.sh:658 msgid "Deselect all" msgstr "取消全选" #: menu.sh:659 msgid "Select modules to include" msgstr "选择要加载的插件" #: menu.sh:694 msgid "Selecting loaded modules" msgstr "选择已识别的模块" #: menu.sh:715 msgid "" "This function is experimental and dangerous. If you don't know much, please " "exit.\\n" msgstr "这个功能是实验性的, 很危险. 如果你知道的不多, 请退出. \\n" #: menu.sh:716 msgid "" "The imported .ko of this function will be implanted into the corresponding " "arch's modules package, which will affect all models of the arch.\\n" msgstr "" "该功能导入 .ko 将被植入相应的架构的模块包中, 这将影响该架构的所有型号.\\n" #: menu.sh:717 msgid "" "This program will not determine the availability of imported modules or even " "make type judgments, as please double check if it is correct.\\n" msgstr "" "该程序不会判断导入的驱动模块的可用性, 甚至不会做类型判断, 因从请你再三确认是" "否正确.\\n" #: menu.sh:718 msgid "" "If you want to remove it, please go to the \"Update Menu\" -> \"Update " "modules\" to forcibly update the modules. All imports will be reset.\\n" msgstr "" "如果您想删除它, 请转到 \"更新\"->\"更新模块\" 强制更新模块, 所有导入都将被重" "置.\\n" #: menu.sh:719 msgid "Do you want to continue?" msgstr "是否继续?" #: menu.sh:724 msgid "Please upload the *.ko file." msgstr "请上传 *.ko 文件." #: menu.sh:740 msgid "Module '%s' added to %s-%s" msgstr "模块 '%s' 已添加到 %s-%s" #: menu.sh:758 msgid "No i915 with dependencies module to deselect." msgstr "没有 i915 及其依赖模块取消选择." #: menu.sh:764 msgid "Module %s deselected.\\n" msgstr "模块 %s 已取消选择.\\n" #: menu.sh:778 menu.sh:2064 menu.sh:2071 menu.sh:2094 msgid "Edit with caution" msgstr "请谨慎编辑" #: menu.sh:798 msgid "Add/Edit a cmdline item" msgstr "添加/编辑 cmdline 参数" #: menu.sh:799 msgid "Show/Delete cmdline items" msgstr "显示/删除 cmdline 参数" #: menu.sh:801 msgid "Define SN/MAC" msgstr "自定义 SN/MAC" #: menu.sh:803 msgid "Show model inherent cmdline" msgstr "显示型号默认的 cmdline 参数" #: menu.sh:805 menu.sh:824 menu.sh:833 menu.sh:857 menu.sh:865 menu.sh:882 #: menu.sh:893 menu.sh:925 msgid "Cmdline" msgstr "Cmdline" #: menu.sh:812 msgid "Commonly used cmdlines:\\n" msgstr "常用 cmdlines:\\n" #: menu.sh:813 msgid "" " * \\Z4disable_mtrr_trim=\\Zn\\n disables kernel trim any uncacheable " "memory out.\\n" msgstr " * \\Z4disable_mtrr_trim=\\Zn\\n 禁用内核修剪任何不可缓存的内存.\\n" #: menu.sh:814 msgid "" " * \\Z4intel_idle.max_cstate=1\\Zn\\n Set the maximum C-state depth " "allowed by the intel_idle driver.\\n" msgstr "" " * \\Z4intel_idle.max_cstate=1\\Zn\\n 设置 intel_idle 驱动允许使用的最大 " "C-state 深度.\\n" #: menu.sh:815 msgid "" " * \\Z4pcie_port_pm=off\\Zn\\n Turn off the power management of the PCIe " "port.\\n" msgstr " * \\Z4pcie_port_pm=off\\Zn\\n 关闭 PCIe 端口的电源管理.\\n" #: menu.sh:816 msgid " * \\Z4libata.force=noncq\\Zn\\n Disable NCQ for all SATA ports.\\n" msgstr " * \\Z4libata.force=noncq\\Zn\\n 禁用硬盘的 NCQ 功能.\\n" #: menu.sh:817 msgid " * \\Z4SataPortMap=??\\Zn\\n Sata Port Map.\\n" msgstr " * \\Z4SataPortMap=??\\Zn\\n Sata Port Map.\\n" #: menu.sh:818 msgid "" " * \\Z4DiskIdxMap=??\\Zn\\n Disk Index Map, Modify disk name sequence.\\n" msgstr " * \\Z4DiskIdxMap=??\\Zn\\n Disk Index Map, 修改磁盘名称顺序.\\n" #: menu.sh:819 msgid "" " * \\Z4i915.enable_guc=2\\Zn\\n Enable the GuC firmware on Intel graphics " "hardware.(value: 1,2 or 3)\\n" msgstr "" " * \\Z4i915.enable_guc=2\\Zn\\n 启用 Intel 核显上的 GuC 固件.(值: 1,2 or " "3)\\n" #: menu.sh:820 msgid "" " * \\Z4i915.max_vfs=7\\Zn\\n Set the maximum number of virtual functions " "(VFs) that can be created for Intel graphics hardware.\\n" msgstr "" " * \\Z4i915.max_vfs=7\\Zn\\n 设置可创建虚拟核显 (VFs) 的最大数量.\\n" #: menu.sh:821 menu.sh:952 msgid "\\nEnter the parameter name and value you need to add.\\n" msgstr "\\n输入需要添加的参数名称和值.\\n" #: menu.sh:834 menu.sh:965 msgid "Invalid parameter name, retry?" msgstr "无效参数名称, 重试?" #: menu.sh:858 msgid "No user cmdline to remove" msgstr "没有用户参数被删除" #: menu.sh:866 msgid "Select cmdline to remove" msgstr "选择要删除的参数" #: menu.sh:877 msgid "Note: (MAC will not be set to NIC, Only for activation services.)" msgstr "注意: (MAC 不会设置到 NIC, 仅用于激活服务.)" #: menu.sh:883 msgid "Random" msgstr "随机" #: menu.sh:894 msgid "Invalid SN/MAC, retry?" msgstr "无效 SN/MAC, 重试?" #: menu.sh:937 msgid "Add/edit a synoinfo item" msgstr "添加/编辑 Synoinfo 参数" #: menu.sh:938 msgid "Show/Delete synoinfo items" msgstr "显示/删除 Synoinfo 参数" #: menu.sh:940 menu.sh:955 menu.sh:964 menu.sh:989 menu.sh:997 msgid "Synoinfo" msgstr "Synoinfo" #: menu.sh:947 msgid "Commonly used synoinfo:\\n" msgstr "常用 synoinfo:\\n" #: menu.sh:948 msgid " * \\Z4maxdisks=??\\Zn\\n Maximum number of disks supported.\\n" msgstr " * \\Z4maxdisks=??\\Zn\\n 最大硬盘数.\\n" #: menu.sh:949 msgid " * \\Z4internalportcfg=0x????\\Zn\\n Internal(sata) disks mask.\\n" msgstr " * \\Z4internalportcfg=0x????\\Zn\\n Internal(sata) 磁盘掩码.\\n" #: menu.sh:950 msgid " * \\Z4esataportcfg=0x????\\Zn\\n Esata disks mask.\\n" msgstr " * \\Z4esataportcfg=0x????\\Zn\\n Esata 磁盘掩码.\\n" #: menu.sh:951 msgid " * \\Z4usbportcfg=0x????\\Zn\\n USB disks mask.\\n" msgstr " * \\Z4usbportcfg=0x????\\Zn\\n USB 磁盘掩码.\\n" #: menu.sh:990 msgid "No synoinfo entries to remove" msgstr "没有 Synoinfo 参数被删除" #: menu.sh:998 msgid "Select synoinfo entry to remove" msgstr "选择要删除的参数" #: menu.sh:1028 msgid "Downloading old pat to extract synology .pat extractor..." msgstr "下载旧 pat, 提取 .pat 解密程序中..." #: menu.sh:1034 menu.sh:1167 msgid "Check internet or cache disk space.\\nError: %d:%d" msgstr "请检查网络连接或磁盘空间.\\nError: %d:%d" #: menu.sh:1073 msgid "Uncompressed tar" msgstr "未压缩 tar" #: menu.sh:1077 msgid "Compressed tar" msgstr "已压缩 tar" #: menu.sh:1081 msgid "Encrypted" msgstr "已加密" #: menu.sh:1085 msgid "" "Could not determine if pat file is encrypted or not, maybe corrupted, try " "again!" msgstr "无法确定 pat 文件是否加密, 可能已损坏, 请重试!" #: menu.sh:1092 menu.sh:1183 msgid "Disassembling %s: " msgstr "解压缩 %s: " #: menu.sh:1099 msgid "Extractor cached." msgstr "已存在解密程序." #: menu.sh:1105 menu.sh:1108 msgid "Extracting ..." msgstr "解压中 ..." #: menu.sh:1138 msgid "%s cached." msgstr "%s 已缓存." #: menu.sh:1142 msgid "Cleaning cache ..." msgstr "清除缓存 ..." #: menu.sh:1151 msgid "" "Based on the current network situation, switch to %s mirror to downloading." msgstr "根据当前的网络状况, 已切换到 %s 镜像服务器进行下载." #: menu.sh:1154 msgid "Downloading %s ..." msgstr "下载 %s 中 ..." #: menu.sh:1173 msgid "Checking hash of %s: " msgstr "检查 %s 的 hash: " #: menu.sh:1176 msgid "" "md5 hash of pat not match, Please reget pat data from the version menu and " "try again!" msgstr "pat 的 md5 Hash 不匹配, 请在版本菜单中重新获取 pat 数据后重试!" #: menu.sh:1179 menu.sh:1195 menu.sh:1205 msgid "OK" msgstr "OK" #: menu.sh:1190 msgid "Setting hash: " msgstr "设置 hash: " #: menu.sh:1197 msgid "Copying files: " msgstr "拷贝文件: " #: menu.sh:1221 msgid "Addon %s not found!" msgstr "插件 %s 未找到!" #: menu.sh:1243 msgid "Cleaning ..." msgstr "清除中 ..." #: menu.sh:1245 msgid "Ready!" msgstr "已就绪!" #: menu.sh:1270 msgid "Switch LKM version:" msgstr "选择 LKM 版本:" #: menu.sh:1271 msgid "HDD sort(hotplug):" msgstr "HDD 排序(hotplug):" #: menu.sh:1274 msgid "Switch direct boot:" msgstr "切换直接启动:" #: menu.sh:1276 msgid "Timeout of get ip in boot:" msgstr "启动时获取 IP 的超时时间:" #: menu.sh:1277 msgid "Timeout of boot wait:" msgstr "启动超时时间:" #: menu.sh:1278 msgid "kernel switching method:" msgstr "内核切换的方式:" #: menu.sh:1280 msgid "Reboot on kernel panic:" msgstr "内核恐慌时重新启动:" #: menu.sh:1282 msgid "Set static IP" msgstr "设置静态 IP" #: menu.sh:1283 msgid "Set wireless account" msgstr "设置无线帐号" #: menu.sh:1284 msgid "Edit user config file manually" msgstr "手动编辑用户配置文件" #: menu.sh:1285 msgid "Edit grub.cfg file manually" msgstr "手动编辑 grub.cfg 文件" #: menu.sh:1286 msgid "Try to recovery a DSM installed system" msgstr "尝试恢复已安装 DSM 的系统" #: menu.sh:1287 msgid "Show disks information" msgstr "显示磁盘信息" #: menu.sh:1289 msgid "show/modify the current pat data" msgstr "显示/修改当前 pat 下载链接" #: menu.sh:1291 msgid "Allow downgrade installation" msgstr "允许降级安装" #: menu.sh:1292 msgid "Format disk(s) # Without loader disk" msgstr "格式化磁盘(s) # 不含启动盘" #: menu.sh:1293 msgid "Reset DSM system password" msgstr "重置 DSM 系统密码" #: menu.sh:1294 msgid "Force enable Telnet&SSH of DSM system" msgstr "强制打开 DSM 的 Telnet&SSH" #: menu.sh:1295 msgid "Save modifications of '/opt/rr'" msgstr "保存'/opt/rr'的修改" #: menu.sh:1297 msgid "Custom dts file # Need rebuild" msgstr "自定义 dts 文件 # 需要重新编译" #: menu.sh:1299 msgid "Custom patch script # Developer" msgstr "自定义补丁脚本 # 开发" #: menu.sh:1301 msgid "Use EMMC as the system disk:" msgstr "使用 EMMC 作为系统磁盘:" #: menu.sh:1303 msgid "Clone bootloader disk to another disk" msgstr "克隆引导盘到另一个磁盘" #: menu.sh:1304 msgid "Report bugs to the author" msgstr "向作者报告错误" #: menu.sh:1305 msgid "Install development tools" msgstr "安装开发者工具" #: menu.sh:1306 msgid "Show QR logo:" msgstr "显示 QR logo:" #: menu.sh:1307 msgid "Set global proxy" msgstr "设置全局代理" #: menu.sh:1308 msgid "Set github proxy" msgstr "设置 GitHub 代理" #: menu.sh:1309 msgid "Vigorously miracle" msgstr "大力出奇迹" #: menu.sh:1312 menu.sh:1336 menu.sh:1348 menu.sh:1368 menu.sh:1391 #: menu.sh:1415 menu.sh:1420 menu.sh:1432 menu.sh:1441 menu.sh:1463 #: menu.sh:1564 menu.sh:1571 menu.sh:1589 menu.sh:1602 menu.sh:1605 #: menu.sh:1618 menu.sh:1622 menu.sh:1623 menu.sh:1628 menu.sh:1632 #: menu.sh:1647 menu.sh:1649 menu.sh:1672 menu.sh:1676 menu.sh:1683 #: menu.sh:1689 menu.sh:1707 menu.sh:1709 menu.sh:1713 menu.sh:1735 #: menu.sh:1738 menu.sh:1742 menu.sh:1745 menu.sh:1760 menu.sh:1768 #: menu.sh:1772 menu.sh:1787 menu.sh:1792 menu.sh:1803 menu.sh:1835 #: menu.sh:1839 menu.sh:1845 menu.sh:1851 menu.sh:1857 menu.sh:1888 #: menu.sh:1901 menu.sh:1905 menu.sh:1915 menu.sh:1920 menu.sh:1927 #: menu.sh:1929 menu.sh:1941 menu.sh:1952 menu.sh:1974 menu.sh:1985 #: menu.sh:2002 msgid "Advanced" msgstr "高级" #: menu.sh:1313 msgid "Advanced option" msgstr "高级设置" #: menu.sh:1337 menu.sh:1349 menu.sh:1369 msgid "Choose a time(seconds)" msgstr "选择一个时间(秒)" #: menu.sh:1379 msgid "Temporary IP: (UI will not refresh)" msgstr "临时 IP: (UI 不会刷新)" #: menu.sh:1416 msgid "Setting IP ..." msgstr "设置 IP ..." #: menu.sh:1421 msgid "Scanning ..." msgstr "扫描中 ..." #: menu.sh:1424 msgid "Scanned SSIDs:\\n" msgstr "扫描到的 SSIDs:\\n" #: menu.sh:1442 msgid "Invalid SSID/PSK, retry?" msgstr "无效 SSID/PSK, 重试?" #: menu.sh:1464 msgid "Setting ..." msgstr "设置中 ..." #: menu.sh:1562 msgid "\\nTotal of ports: %s\\n" msgstr "\\n端口总数: %s\\n" #: menu.sh:1563 msgid "" "\\nPorts with color \\Z1red\\Zn as DUMMY, color \\Z2\\Zbgreen\\Zn has drive " "connected." msgstr "\\n\\Z1红色\\Zn 为模拟端口, \\Z2\\Zb绿色\\Zn 为已驱动的物理端口." #: menu.sh:1570 msgid "pat: (editable)" msgstr "pat: (可编辑)" #: menu.sh:1586 msgid "" "This feature will allow you to downgrade the installation by removing the " "VERSION file from the first partition of all disks.\\n" msgstr "此功能通过删除所有磁盘的第一个分区的 VERSION 文件来允许你降级安装.\\n" #: menu.sh:1587 msgid "Therefore, please insert all disks before continuing.\\n" msgstr "因此, 请插入所有磁盘后再进行操作.\\n" #: menu.sh:1588 menu.sh:1629 msgid "" "Warning:\\nThis operation is irreversible. Please backup important data. Do " "you want to continue?" msgstr "警告:\\n该操作不可逆, 请提前备份重要数据. 是否继续?" #: menu.sh:1603 msgid "Removing ..." msgstr "删除中 ..." #: menu.sh:1604 msgid "Remove VERSION file for all disks completed." msgstr "已移除所有磁盘的 VERSION 文件." #: menu.sh:1619 menu.sh:1836 msgid "No disk found!" msgstr "未找到磁盘!" #: menu.sh:1633 msgid "" "Warning:\\nThe current hds is in raid, do you still want to format them?" msgstr "警告:\\n当前的硬盘处于 raid 中,是否仍要格式化?" #: menu.sh:1648 msgid "Formatting ..." msgstr "格式化中 ..." #: menu.sh:1650 msgid "Formatting is complete." msgstr "格式化完成." #: menu.sh:1673 msgid "The installed Syno system not found in the currently inserted disks!" msgstr "未在当前插入的硬盘中找到已安装的 syno 系统!" #: menu.sh:1677 msgid "Choose a user name" msgstr "选择一个用户" #: menu.sh:1684 msgid "Type a new password for user '%s'" msgstr "输入用户 '%s' 的新密码" #: menu.sh:1690 msgid "Invalid password" msgstr "无效密码" #: menu.sh:1708 msgid "Resetting ..." msgstr "重置中 ..." #: menu.sh:1710 msgid "Password reset completed." msgstr "重置密码完成." #: menu.sh:1714 msgid "Please insert all disks before continuing.\\n" msgstr "请插入所有磁盘后再进行操作.\\n" #: menu.sh:1736 msgid "Enabling ..." msgstr "开启中 ..." #: menu.sh:1737 msgid "Telnet&SSH is enabled." msgstr "Telnet&SSH 已开启." #: menu.sh:1737 msgid "Telnet&SSH is not enabled." msgstr "Telnet&SSH 未开启." #: menu.sh:1743 msgid "" "Warning:\\nDo not terminate midway, otherwise it may cause damage to the RR. " "Do you want to continue?" msgstr "警告:\\n请不要中途停止, 否则将导致 RR 引导损毁, 是否继续?" #: menu.sh:1746 msgid "" "Saving ...\\n(It usually takes 5-10 minutes, please be patient and wait.)" msgstr "保存中 ...\\n(一般需要 5~10 分钟,请耐心等待.)" #: menu.sh:1761 msgid "Save is complete." msgstr "保存完成." #: menu.sh:1767 msgid "" "Or upload the dts file to %s via DUFS, Will be automatically imported when " "building." msgstr "或者通过 DUFS 上传 dts 文件到 %s, 编译时会自动导入." #: menu.sh:1773 msgid "" "Currently, only dts format files are supported. Please prepare and click to " "confirm uploading.\\n(saved in /mnt/p3/users/)" msgstr "" "目前, 只支持 dts 格式的文件, 请准备并点击确认上传.\\n(保存于 /mnt/p3/users/ " "中)" #: menu.sh:1788 msgid "Not a valid dts file, please try again!" msgstr "dts 文件无效, 请重试!" #: menu.sh:1793 msgid "A valid dts file, Automatically import at compile time." msgstr "dts 文件有效, 将在编译时自动导入." #: menu.sh:1799 msgid "This option is only informative.\\n\\n" msgstr "此选项仅为提示.\\n\\n" #: menu.sh:1800 msgid "This program reserves an interface for ramdisk custom patch scripts.\\n" msgstr "此程序为 ramdisk 自定义补丁脚本保留了一个接口.\\n" #: menu.sh:1801 msgid "Call timing: called before ramdisk packaging.\\n" msgstr "调用时机: 在 ramdisk 打包前调用.\\n" #: menu.sh:1802 msgid "Location: /mnt/p3/scripts/*.sh\\n" msgstr "位置: /mnt/p3/scripts/*.sh\\n" #: menu.sh:1840 msgid "Choose a disk to clone to" msgstr "选择要克隆到的磁盘" #: menu.sh:1846 msgid "No disk selected!" msgstr "未选择磁盘!" #: menu.sh:1852 msgid "Disk %s size is less than 1GB and cannot be cloned!" msgstr "磁盘 %s 的大小小于 1GB,无法克隆!" #: menu.sh:1856 msgid "" "Warning:\\nDisk %s will be formatted and written to the bootloader. Please " "confirm that important data has been backed up. \\nDo you want to continue?" msgstr "" "警告:\\n磁盘 %s 将被格式化并写入引导程序. 请确认重要数据已备份. \\n是否继续?" #: menu.sh:1889 msgid "Cloning ..." msgstr "克隆中 ..." #: menu.sh:1891 msgid "" "Bootloader has been cloned to disk %s, please remove the current bootloader " "disk!\\nReboot?" msgstr "引导程序已克隆到磁盘 %s, 请移除当前引导盘! \\n重启?" #: menu.sh:1902 msgid "" "Please via %s to download the logs,\\nAnd go to github to create an issue " "and upload the logs." msgstr "请通过 %s 下载日志 logs,\\n并前往 github 创建问题并上传日志 logs." #: menu.sh:1906 msgid "Please go to github to create an issue and upload the logs." msgstr "请前往 github 创建问题并上传日志 logs." #: menu.sh:1910 msgid "\\Z1No logs found!\\Zn\\n\\n" msgstr "\\Z1日志 logs 未找到!\\Zn\\n\\n" #: menu.sh:1911 msgid "Please do as follows:\\n" msgstr "请按如下操作:\\n" #: menu.sh:1912 msgid " 1. Add dbgutils in addons and rebuild.\\n" msgstr " 1. 在插件中添加 dbgutils 并重新编译.\\n" #: menu.sh:1913 msgid " 2. Wait 10 minutes after booting.\\n" msgstr " 2. 启动后等待10分钟.\\n" #: menu.sh:1914 msgid " 3. Reboot into RR and go to this option.\\n" msgstr " 3. 重启到 RR 并回到该选项.\\n" #: menu.sh:1921 msgid "" "This option only installs opkg package management, allowing you to install " "more tools for use and debugging. Do you want to continue?" msgstr "" "该选项仅安装 opkg 包管理工具, 使你能够安装更多的工具以供使用和调试, 是否继续?" #: menu.sh:1928 msgid "opkg installing ..." msgstr "opkg 安装中 ..." #: menu.sh:1930 msgid "" "opkg install is complete. Please reconnect to ssh/web, or execute 'source ~/." "bashrc'" msgstr "opkg 安装完成. 请重新链接 ssh/web, 或者执行 'source ~/.bashrc'" #: menu.sh:1942 msgid "Please enter a proxy server url.(e.g., http://192.168.1.1:7981/)" msgstr "请输入代理服务器 url.(e.g., http://192.168.1.1:7981/)" #: menu.sh:1953 menu.sh:1986 msgid "Invalid proxy server url, continue?" msgstr "无效的代理服务器 url, 是否继续?" #: menu.sh:1975 msgid "Please enter a proxy server url.(e.g., https://mirror.ghproxy.com/)" msgstr "请输入代理服务器 url.(e.g., https://mirror.ghproxy.com/)" #: menu.sh:2000 msgid "It is expected that all restrictions on DSM will be lifted,\\n" msgstr "预计将解除DSM一切限制,\\n" #: menu.sh:2001 msgid "" "But since upgrading is not supported, I don not want to implement it for the " "time being.\\n" msgstr "但由于不支持升级, 暂时不想实现.\\n" #: menu.sh:2013 menu.sh:2048 menu.sh:2055 msgid "Try recovery DSM" msgstr "尝试恢复 DSM 系统" #: menu.sh:2014 msgid "Trying to recovery a DSM installed system ..." msgstr "尝试恢复已安装的 DSM 系统中 ..." #: menu.sh:2042 msgid "Found a installation:\\nModel: %s\\nProductversion: %s" msgstr "找到已安装:\\n型号: %s\\n版本: %s" #: menu.sh:2046 msgid "\\nSerial: %s" msgstr "\\nSN: %s" #: menu.sh:2056 msgid "Unfortunately I couldn't mount the DSM partition!" msgstr "很遗憾, 我无法挂载 DSM 分区!" #: menu.sh:2106 msgid "Alert" msgstr "警告" #: menu.sh:2107 msgid "Config changed, would you like to rebuild the loader?" msgstr "配置已更改, 是否重新编译引导?" #: menu.sh:2124 menu.sh:2600 msgid "Choose a language" msgstr "选择语言" #: menu.sh:2139 msgid "Choose a layout" msgstr "选择布局" #: menu.sh:2151 msgid "Choice a keymap" msgstr "选择键盘映射" #: menu.sh:2170 menu.sh:2241 menu.sh:2325 menu.sh:2411 menu.sh:2416 #: menu.sh:2421 menu.sh:2426 menu.sh:2433 menu.sh:2441 menu.sh:2447 #: menu.sh:2453 menu.sh:2459 menu.sh:2465 msgid "Update %s" msgstr "更新 %s" #: menu.sh:2172 menu.sh:2175 msgid "Checking last version ..." msgstr "检测新版本中 ..." #: menu.sh:2186 menu.sh:2189 menu.sh:2192 menu.sh:2198 msgid "Error checking new version.\\nError: TAG is %s" msgstr "检测新版本错误.\\nError: TAG is %s" #: menu.sh:2201 msgid "No new version. Actual version is %s\\nForce update?" msgstr "没有新版本. 实际版本为 %s\\n强制更新?" #: menu.sh:2205 msgid "No new version." msgstr "没有新版本." #: menu.sh:2221 msgid "Downloading ..." msgstr "下载中 ..." #: menu.sh:2225 menu.sh:2228 menu.sh:2231 msgid "Error downloading new version.\\nError: %d:%d" msgstr "下载新版本错误.\\nError: %d:%d" #: menu.sh:2243 menu.sh:2246 menu.sh:2327 menu.sh:2330 msgid "Extracting last version" msgstr "解压新版本" #: menu.sh:2251 menu.sh:2254 msgid "Error extracting update file" msgstr "更新文件解压错误" #: menu.sh:2262 menu.sh:2265 msgid "Checksum do not match!" msgstr "Checksum 不匹配!" #: menu.sh:2275 menu.sh:2278 msgid "" "The current version does not support upgrading to the latest update.zip. " "Please remake the bootloader disk!" msgstr "当前版本不支持最新的 update.zip 升级, 请重新制作引导盘!" #: menu.sh:2284 menu.sh:2287 msgid "Installing new files ..." msgstr "安装更新中 ..." #: menu.sh:2314 menu.sh:2317 msgid "RR updated with success to %s!\\nReboot?" msgstr "RR 更新成功 %s!\\n重启?" #: menu.sh:2337 menu.sh:2340 msgid "Installing new %s ..." msgstr "安装新 %s 中 ..." #: menu.sh:2372 menu.sh:2375 menu.sh:2378 msgid "%s updated with success!" msgstr "%s 更新成功!" #: menu.sh:2391 msgid "Update all" msgstr "更新全部" #: menu.sh:2392 msgid "Update RR" msgstr "更新 RR" #: menu.sh:2393 msgid "Update addons" msgstr "更新插件" #: menu.sh:2394 msgid "Update modules" msgstr "更新模块" #: menu.sh:2395 msgid "Update LKMs" msgstr "更新LKMs" #: menu.sh:2396 msgid "Update CKs" msgstr "更新 CKs" #: menu.sh:2397 msgid "Local upload" msgstr "本地上传" #: menu.sh:2398 msgid "Pre Release:" msgstr "预发布:" #: menu.sh:2402 msgid "" "Manually uploading update.zip,addons.zip,modules.zip,rp-lkms.zip,rr-cks.zip " "to /tmp/ will skip the download." msgstr "" "手动上传 update.zip,addons.zip,modules.zip,rp-lkms.zip,rr-cks.zip 到 /tmp/ 将" "跳过下载." #: menu.sh:2411 menu.sh:2447 msgid "addons" msgstr "插件" #: menu.sh:2416 menu.sh:2453 msgid "modules" msgstr "模块" #: menu.sh:2421 menu.sh:2459 msgid "LKMs" msgstr "LKMs" #: menu.sh:2426 menu.sh:2465 msgid "CKs" msgstr "CKs" #: menu.sh:2433 menu.sh:2441 msgid "RR" msgstr "RR" #: menu.sh:2474 msgid "" "Or upload update.zip, addons.zip, modules.zip, rp-lkms.zip,rr-cks.zip to /" "tmp/ via DUFS will skip the download.\\n" msgstr "" "或者通过 DUFS 上传 update.zip, addons.zip, modules.zip, rp-lkms.zip, rr-cks." "zip 到 /tmp/ 将跳过下载.\\n" #: menu.sh:2480 msgid "" "Please keep the attachment name consistent with the attachment name on " "Github.\\n" msgstr "请保持附件名称与 github 上附件名称一致.\\n" #: menu.sh:2481 msgid "Upload update*.zip will update RR.\\n" msgstr "上传 update*.zip 将更新 RR.\\n" #: menu.sh:2482 msgid "Upload addons*.zip will update Addons.\\n" msgstr "上传 addons*.zip 将更新 插件.\\n" #: menu.sh:2483 msgid "Upload modules*.zip will update Modules.\\n" msgstr "上传 modules*.zip 将更新 模块.\\n" #: menu.sh:2484 msgid "Upload rp-lkms*.zip will update LKMs.\\n" msgstr "上传 rp-lkms*.zip 将更新 LKMs.\\n" #: menu.sh:2485 msgid "Upload rr-cks*.zip will update CKs.\\n" msgstr "上传 rr-cks*.zip 将更新 CKs.\\n" #: menu.sh:2546 msgid "This person is very lazy and hasn't written anything." msgstr "这个人很懒, 什么也没有写." #: menu.sh:2573 msgid "Choose a model" msgstr "选择型号" #: menu.sh:2575 msgid "Choose a version" msgstr "选择版本" #: menu.sh:2577 msgid "Parse pat" msgstr "解析 pat" #: menu.sh:2584 msgid "Kernel:" msgstr "内核:" #: menu.sh:2586 msgid "Addons menu" msgstr "插件" #: menu.sh:2587 msgid "Modules menu" msgstr "模块" #: menu.sh:2588 msgid "Cmdline menu" msgstr "设置 Cmdline" #: menu.sh:2589 msgid "Synoinfo menu" msgstr "设置 Synoinfo" #: menu.sh:2591 msgid "Advanced menu" msgstr "高级设置" #: menu.sh:2594 msgid "Build the loader" msgstr "编译引导" #: menu.sh:2598 msgid "Boot the loader" msgstr "启动" #: menu.sh:2601 msgid "Choose a keymap" msgstr "选择键盘" #: menu.sh:2603 msgid "Clean disk cache" msgstr "清除磁盘缓存" #: menu.sh:2605 msgid "Update menu" msgstr "更新" #: menu.sh:2606 msgid "Notepad" msgstr "备注" #: menu.sh:2628 msgid "Change ..." msgstr "改变 ..." #: menu.sh:2697 msgid "Choose a action" msgstr "选择动作" #: menu.sh:2698 msgid "Poweroff" msgstr "关机" #: menu.sh:2699 msgid "Reboot" msgstr "重启" #: menu.sh:2700 msgid "Reboot to RR" msgstr "重启到 RR" #: menu.sh:2701 msgid "Back to shell" msgstr "退出到 shell" #: menu.sh:2727 msgid "Call \\033[1;32mmenu.sh\\033[0m to return to menu" msgstr "执行 \\033[1;32mmenu.sh\\033[0m 重新进入设置菜单"