RROrg-rr/files/initrd/opt/rr/lang/zh_TW.po

# Chinese translations for RR package.
# Copyright (C) 2023 THE RR'S COPYRIGHT HOLDER
# This file is distributed under the same license as the RR package.
# March Fun <marchfun@gmail.com>, 2023.
#
msgid ""
msgstr ""
"Project-Id-Version: RR\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-01-04 03:38+0800\n"
"PO-Revision-Date: 2024-01-04 03:48+0800\n"
"Last-Translator: March Fun <marchfun@marchfun-pc.>\n"
"Language-Team: Chinese (Taiwan) <marchfun@marchfun-pc.>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 3.4.2\n"

#: boot.sh:8 init.sh:9 menu.sh:9
msgid "Loader is not init!"
msgstr "開機程式未初始化！"

#: boot.sh:10 init.sh:107
msgid "Loader is not configured!"
msgstr "開機檔未設置！"

#: boot.sh:20 init.sh:14
msgid "Welcome to %s"
msgstr "歡迎使用 %s"

#: boot.sh:33
msgid "DSM zImage changed"
msgstr "DSM zImage 已變更"

#: boot.sh:36 menu.sh:1192
msgid "zImage not patched,\\nPlease upgrade the bootloader version and try again.\\nPatch error:\\n"
msgstr "zImage 未修補，\\n請升級開機載入程式版本然後重試。\\n修補錯誤:\\n"

#: boot.sh:45
msgid "DSM Ramdisk changed"
msgstr "DSM Ramdisk 已變更"

#: boot.sh:48 menu.sh:1198
msgid "Ramdisk not patched,\\nPlease upgrade the bootloader version and try again.\\nPatch error:\\n"
msgstr "Ramdisk 未修補，\\n請升級開機載入程式版本然後重試。\\n修補錯誤:\\n"

#: boot.sh:67
msgid "Model:"
msgstr "型號:"

#: boot.sh:68
msgid "Build:"
msgstr "版本:"

#: boot.sh:69
msgid "LKM:  "
msgstr "LKM:  "

#: boot.sh:70
msgid "DMI:  "
msgstr "DMI:  "

#: boot.sh:71
msgid "CPU:  "
msgstr "CPU:  "

#: boot.sh:72
msgid "MEM:  "
msgstr "MEM:  "

#: boot.sh:75
msgid "The current version of bootloader does not support booting %s-%s, please upgrade and rebuild."
msgstr "目前版本的開機載入程式不支援啟動 %s-%s，請升級並重建。"

#: boot.sh:87
msgid "Please insert at least one sata/scsi disk for system installation, except for the bootloader disk."
msgstr "除了開機碟之外，請至少插入一個 sata/scsi 磁碟以進行系統安裝。"

#: boot.sh:154
msgid "Cmdline:\\n"
msgstr "Cmdline:\\n"

#: boot.sh:160
msgid "Reboot to boot directly in DSM"
msgstr "重新開機以直接啟動 DSM"

#: boot.sh:166 init.sh:120
msgid "Detected %s network cards."
msgstr "檢測到 %s 個網路卡。"

#: boot.sh:167 init.sh:121
msgid "Checking Connect."
msgstr "檢查連線。"

#: boot.sh:187
msgid "Waiting IP.(For reference only)"
msgstr "正在取得 IP (僅供參考)"

#: boot.sh:194 init.sh:146
msgid "DOWN"
msgstr "關機"

#: boot.sh:198 init.sh:150
msgid "NOT CONNECTED"
msgstr "未連線"

#: boot.sh:202 init.sh:154
msgid "TIMEOUT (Please check the IP on the router.)"
msgstr "逾時 (請檢查路由器上的IP.)"

#: boot.sh:208
msgid "Access \\033[1;34mhttp://%s:5000\\033[0m to connect the DSM via web."
msgstr "在瀏覽器中瀏覽 \\033[1;34mhttp://%s:5000\\033[0m 連線 DSM。"

#: boot.sh:220
msgid "%2ds (Changing access(ssh/web) status will interrupt boot)"
msgstr "%2ds (變更存取 (ssh/web) 狀態將中斷開機)"

#: boot.sh:224
msgid "access(ssh/web) status has changed and booting is interrupted."
msgstr "存取 (ssh/web) 狀態已變更，開機已中斷。"

#: boot.sh:234
msgid "Loading DSM kernel ..."
msgstr "載入 DSM 核心..."

#: boot.sh:247
msgid "Warning, running kexec with --noefi param, strange things will happen!!"
msgstr "警告，使用'--noefi'參數執行'kexec'，可能有意外事情發生！"

#: boot.sh:252
msgid "Booting ..."
msgstr "開機中..."

#: boot.sh:254
msgid "[This interface will not be operational. Please wait a few minutes.\\nFind DSM via http://find.synology.com/ or Synology Assistant and connect.]"
msgstr "[該介面已無法操作。請於數分鐘後透過\\n http://find.synology.com/ 或者 Synology Assistant 搜尋 DSM 並連線。]"

#: init.sh:23
msgid "Network devices not found!"
msgstr "未找到網路卡！"

#: init.sh:84
msgid "Loader disk neither USB or SATA/SCSI/NVME/MMC DoM"
msgstr "開機碟僅支援 USB 或者 SATA/SCSI/NVME/MMC DoM"

#: init.sh:92
msgid "Loader disk:"
msgstr "開機碟:"

#: init.sh:100
msgid "Loading keymap"
msgstr "載入 keymap"

#: init.sh:110
msgid "User requested edit settings."
msgstr "使用者要求編輯設定。"

#: init.sh:139
msgid "Waiting IP."
msgstr "正在取得 IP。"

#: init.sh:160
msgid "Access \\033[1;34mhttp://%s:7681\\033[0m to configure the loader via web terminal."
msgstr "在瀏覽器中瀏覽 \\033[1;34mhttp://%s:7681\\033[0m 進入 WEB 終端進行設置。"

#: init.sh:170
msgid "Call \\033[1;32mmenu.sh\\033[0m to configure loader"
msgstr "執行 \\033[1;32mmenu.sh\\033[0m 進入設定選單"

#: init.sh:172
msgid "User config is on"
msgstr "使用者設定已開啟"

#: init.sh:173
msgid "TTYD: \\033[1;34mhttp://rr:7681/\\033[0m"
msgstr "TTYD: \\033[1;34mhttp://rr:7681/\\033[0m"

#: init.sh:174
msgid "DUFS: \\033[1;34mhttp://rr:7304/\\033[0m"
msgstr "DUFS: \\033[1;34mhttp://rr:7304/\\033[0m"

#: init.sh:175
msgid "TTYD&DUFS: \\033[1;34mhttp://rr:80/\\033[0m"
msgstr "TTYD&DUFS: \\033[1;34mhttp://rr:80/\\033[0m"

#: init.sh:177
msgid "Default SSH Root password is"
msgstr "預設 SSH 的 root 密碼為"

#: init.sh:191
msgid "You have less than 4GB of RAM, if errors occur in loader creation, please increase the amount of memory."
msgstr "您的記憶體不足 4GB，如果在建立開機檔時出現錯誤，請增加記憶體。"

#: menu.sh:100 menu.sh:134 menu.sh:177
msgid "Model"
msgstr "型號"

#: menu.sh:101
msgid "Reading models"
msgstr "讀取型號"

#: menu.sh:111
msgid "Compatibility judgment"
msgstr "相容性判斷"

#: menu.sh:132
msgid "Disable flags restriction"
msgstr "停用標誌限制"

#: menu.sh:133
msgid "Show all models"
msgstr "顯示全部模組"

#: menu.sh:135
msgid "Choose the model"
msgstr "選擇型號"

#: menu.sh:227 menu.sh:238 menu.sh:244 menu.sh:255 menu.sh:281 menu.sh:301 menu.sh:351
msgid "Product Version"
msgstr "產品版本"

#: menu.sh:228
msgid "Choose a product version"
msgstr "選擇產品版本"

#: menu.sh:239
msgid "The current version has been set to %s. Do you want to reset the version?"
msgstr "目前版本已設定為 %s。是否要重設版本？"

#: menu.sh:245
msgid "This version does not support UEFI startup, Please select another version or switch the startup mode."
msgstr "該版本不支援 UEFI 開機，請選擇其他版本或者切換開機模式。"

#: menu.sh:256
msgid "Get pat data ..."
msgstr "取得 pat 資料..."

#: menu.sh:275
msgid "Failed to get pat data,\\nPlease manually fill in the URL and md5sum of the corresponding version of pat."
msgstr "取得 pat 資料失敗，\\n請手動填寫相對版本 pat 的 URL 和 MD5。"

#: menu.sh:279
msgid "Successfully to get pat data,\\nPlease confirm or modify as needed."
msgstr "取得 pat 資料成功，\\n請確認或者依需要修改。"

#: menu.sh:282
msgid "Retry"
msgstr "重試"

#: menu.sh:302 menu.sh:393
msgid "Reconfiguring Synoinfo, Addons and Modules"
msgstr "重新設置 Syninfo、增益集和模組"

#: menu.sh:336
msgid "You have selected the %s and %s.\\n'Parse Pat' will overwrite the previous selection.\\nDo you want to continue?"
msgstr "你已經選擇了 %s 和 %s\\n‘解析 Pat' 將覆蓋先前的選擇.\\n是否繼續?"

#: menu.sh:337
msgid "Parse Pat"
msgstr "解析 Pat"

#: menu.sh:345
msgid "No pat file found in users folder!\\n"
msgstr "在用戶資料夾中找不到 pat 檔案！\\n"

#: menu.sh:346
msgid "Please upload the pat file to /mnt/p3/users/ folder via DUFS and re-enter this option.\\n"
msgstr "請透過 DUFS 將 pat 檔案上傳到 /mnt/p3/users/ 資料夾，然後重新輸入此選項。\\n"

#: menu.sh:347 menu.sh:357 menu.sh:2269 menu.sh:2333 menu.sh:2343 menu.sh:2360 menu.sh:2380
msgid "Update"
msgstr "更新"

#: menu.sh:352
msgid "Choose a pat file"
msgstr "選擇一个 pat 檔案"

#: menu.sh:358 menu.sh:370 menu.sh:1066
msgid "pat Invalid, try again!"
msgstr "無效的 pat，請重試！"

#: menu.sh:363
msgid "Parse %s ..."
msgstr "解析 %s ..."

#: menu.sh:379
msgid "Currently, %s is not supported."
msgstr "目前，不支援 %s。"

#: menu.sh:389
msgid "Currently, %s of %s is not supported."
msgstr "目前，不支援 %s-%s。"

#: menu.sh:450 menu.sh:1208 menu.sh:2448
msgid "Main menu"
msgstr "主功能表"

#: menu.sh:451 menu.sh:1209
msgid "Making ..."
msgstr "製作中 ..."

#: menu.sh:453 menu.sh:1211
msgid "Error"
msgstr "錯誤"

#: menu.sh:486 menu.sh:503 menu.sh:508 menu.sh:514 menu.sh:525 menu.sh:533 menu.sh:556 menu.sh:563 menu.sh:567 menu.sh:581 menu.sh:585 menu.sh:593 menu.sh:596
msgid "Addons"
msgstr "增益集"

#: menu.sh:487 menu.sh:616 menu.sh:754 menu.sh:887 menu.sh:2449
msgid "Choose a option"
msgstr "選擇選項"

#: menu.sh:488
msgid "Add an addon"
msgstr "加入增益集"

#: menu.sh:489
msgid "Delete addons"
msgstr "删除增益集"

#: menu.sh:490
msgid "Show all addons"
msgstr "顯示所有增益集"

#: menu.sh:491
msgid "Upload a external addon"
msgstr "上傳外部增益集"

#: menu.sh:492 menu.sh:621 menu.sh:752 menu.sh:885 menu.sh:1268 menu.sh:2267 menu.sh:2446 menu.sh:2522
msgid "Exit"
msgstr "退出"

#: menu.sh:504
msgid "No available addons to add"
msgstr "沒有可用的增益集可加入"

#: menu.sh:509
msgid "Select an addon"
msgstr "選擇增益集"

#: menu.sh:515
msgid "Type a optional params to addon"
msgstr "輸入增益集的選用參數"

#: menu.sh:526
msgid "No user addons to remove"
msgstr "沒有要删除的使用者增益集"

#: menu.sh:534
msgid "Select addon to remove"
msgstr "選擇要删除的增益集"

#: menu.sh:547
msgid "Name with color \"\\Z4blue\\Zn\" have been added, with color \"black\" are not added.\\n\\n"
msgstr "名稱色彩為 \"\\Z4藍色\\Zn\" 者為已加入，色彩為 \"黑色\" 者為未加入。\\n\\n"

#: menu.sh:562 menu.sh:693 menu.sh:1715 menu.sh:2331
msgid "This feature is only available when accessed via ssh (Requires a terminal that supports ZModem protocol).\\n"
msgstr "此功能僅在透過 web/ssh 存取時可用。(需要支援 ZModem 協定的終端)。\\n"

#: menu.sh:568
msgid "Please upload the *.addons file."
msgstr "請上傳 *.addons 檔案。"

#: menu.sh:582 menu.sh:728 menu.sh:2361 menu.sh:2381
msgid "Not a valid file, please try again!"
msgstr "不是有效的檔案，請重試！"

#: menu.sh:586
msgid "The addon already exists. Do you want to overwrite it?"
msgstr "該增益集已存在，是否覆寫？"

#: menu.sh:594
msgid "Addon '%s' added to loader, Please enable it in 'Add an addon' menu."
msgstr "增益集 '%s' 已加入到開機中，請在「加入增益集」選單中開啟。"

#: menu.sh:597
msgid "File format not recognized!"
msgstr "檔案格式無法識別！"

#: menu.sh:615 menu.sh:627 menu.sh:640 menu.sh:677 menu.sh:694 menu.sh:704 menu.sh:707 menu.sh:723 menu.sh:727
msgid "Modules"
msgstr "模組"

#: menu.sh:617
msgid "Show/Select modules"
msgstr "顯示/選擇模組"

#: menu.sh:618
msgid "Select loaded modules"
msgstr "選擇已識別的模組"

#: menu.sh:619
msgid "Upload a external module"
msgstr "上傳一個外部模組"

#: menu.sh:620
msgid "Priority use of official drivers:"
msgstr "優先使用官方驅動程式:"

#: menu.sh:628
msgid "Reading modules ..."
msgstr "讀取模組中..."

#: menu.sh:641
msgid "Select all"
msgstr "全選"

#: menu.sh:642
msgid "Deselect all"
msgstr "全部不選"

#: menu.sh:643
msgid "Select modules to include"
msgstr "選擇要載入的增益集"

#: menu.sh:678
msgid "Selecting loaded modules"
msgstr "選擇已識別的模組"

#: menu.sh:699
msgid "This function is experimental and dangerous. If you don't know much, please exit.\\n"
msgstr "該功能是實驗性質且具有風險，如果你不瞭解，請退出。\\n"

#: menu.sh:700
msgid "The imported .ko of this function will be implanted into the corresponding arch's modules package, which will affect all models of the arch.\\n"
msgstr "該功能匯入 .ko 將植入相對架構的模組套件。這將影響該架構的所有型號。\\n"

#: menu.sh:701
msgid "This program will not determine the availability of imported modules or even make type judgments, as please double check if it is correct.\\n"
msgstr "該程式不會判斷匯入的驅動模組的可用性，甚至不會做類型判斷，因此請再三確認是否正確。\\n"

#: menu.sh:702
msgid "If you want to remove it, please go to the \"Update Menu\" -> \"Update modules\" to forcibly update the modules. All imports will be reset.\\n"
msgstr "如果您想删除它，請前往「更新 -> 更新模組」強制更新模組。所有匯入都將被重設。\\n"

#: menu.sh:703
msgid "Do you want to continue?"
msgstr "是否繼續？"

#: menu.sh:708
msgid "Please upload the *.ko file."
msgstr "請上傳 *.ko 檔案。"

#: menu.sh:724
msgid "Module '%s' added to %s-%s"
msgstr "模組 '%s' 已加入到 %s-%s"

#: menu.sh:746
msgid "Add/Edit a cmdline item"
msgstr "加入/編輯 cmdline 項目"

#: menu.sh:747
msgid "Show/Delete cmdline items"
msgstr "顯示/刪除 cmdline 項目"

#: menu.sh:749
msgid "Define SN/MAC"
msgstr "自訂 SN/MAC"

#: menu.sh:751
msgid "Show model inherent cmdline"
msgstr "顯示型號預設的 cmdline"

#: menu.sh:753 menu.sh:770 menu.sh:779 menu.sh:803 menu.sh:811 menu.sh:828 menu.sh:839 menu.sh:871
msgid "Cmdline"
msgstr "Cmdline"

#: menu.sh:760
msgid "Commonly used cmdlines:\\n"
msgstr "常用的 cmdlines:\\n"

#: menu.sh:761
msgid " * \\Z4disable_mtrr_trim=\\Zn\\n    disables kernel trim any uncacheable memory out.\\n"
msgstr " * \\Z4disable_mtrr_trim=\\Zn\\n    停用核心修剪任何不可快取的記憶體。\\n"

#: menu.sh:762
msgid " * \\Z4intel_idle.max_cstate=1\\Zn\\n    Set the maximum C-state depth allowed by the intel_idle driver.\\n"
msgstr " * \\Z4intel_idle.max_cstate=1\\Zn\\n   設定 intel_idle 驅動程式允許的最大 C-狀態 深度。\\n"

#: menu.sh:763
msgid " * \\Z4SataPortMap=??\\Zn\\n    Sata Port Map.\\n"
msgstr " * \\Z4SataPortMap=??\\Zn\\n    Sata 埠地圖。\\n"

#: menu.sh:764
msgid " * \\Z4DiskIdxMap=??\\Zn\\n    Disk Index Map, Modify disk name sequence.\\n"
msgstr " * \\Z4DiskIdxMap=??\\Zn\\n    磁碟索引地圖，修改磁碟名稱順序。\\n"

#: menu.sh:765
msgid " * \\Z4i915.enable_guc=2\\Zn\\n    Enable the GuC firmware on Intel graphics hardware.(value: 1,2 or 3)\\n"
msgstr " * \\Z4i915.enable_guc=2\\Zn\\n    在 Intel 圖形硬體上啟用 GuC 韌體。(值：1、2 或 3)\\n"

#: menu.sh:766
msgid " * \\Z4i915.max_vfs=7\\Zn\\n     Set the maximum number of virtual functions (VFs) that can be created for Intel graphics hardware.\\n"
msgstr " * \\Z4i915.max_vfs=7\\Zn\\n     設定 Intel 圖形硬體可以建立的最大虛擬功能  (VF) 數。\\n"

#: menu.sh:767 menu.sh:898
msgid "\\nEnter the parameter name and value you need to add.\\n"
msgstr "\\n輸入需要加入的參數名稱和值。\\n"

#: menu.sh:780 menu.sh:911
msgid "Invalid parameter name, retry?"
msgstr "無效的參數名稱，要重試？"

#: menu.sh:804
msgid "No user cmdline to remove"
msgstr "沒有使用者 cmdline 被删除"

#: menu.sh:812
msgid "Select cmdline to remove"
msgstr "選擇要删除的 cmdline"

#: menu.sh:823
msgid "Note: (MAC will not be set to NIC, Only for activation services.)"
msgstr "注意：(MAC 不會設定為 NIC，只作為服務啟動。)"

#: menu.sh:829
msgid "Random"
msgstr "隨機"

#: menu.sh:840
msgid "Invalid SN/MAC, retry?"
msgstr "無效的 SN/MAC，要重試？"

#: menu.sh:883
msgid "Add/edit a synoinfo item"
msgstr "加入/編輯 Synoinfo 項目"

#: menu.sh:884
msgid "Show/Delete synoinfo items"
msgstr "顯示/刪除 synoinfo 項目"

#: menu.sh:886 menu.sh:901 menu.sh:910 menu.sh:935 menu.sh:943
msgid "Synoinfo"
msgstr "Synoinfo"

#: menu.sh:893
msgid "Commonly used synoinfo:\\n"
msgstr "常用的 synoinfo:\\n"

#: menu.sh:894
msgid " * \\Z4maxdisks=??\\Zn\\n    Maximum number of disks supported.\\n"
msgstr " * \\Z4maxdisks=??\\Zn\\n    支援的磁碟最大數量。\\n"

#: menu.sh:895
msgid " * \\Z4internalportcfg=0x????\\Zn\\n    Internal(sata) disks mask.\\n"
msgstr " * \\Z4internalportcfg=0x????\\Zn\\n    內部 (sata) 磁碟遮罩。\\n"

#: menu.sh:896
msgid " * \\Z4esataportcfg=0x????\\Zn\\n    Esata disks mask.\\n"
msgstr " * \\Z4esataportcfg=0x????\\Zn\\n    Esata 磁碟遮罩。\\n"

#: menu.sh:897
msgid " * \\Z4usbportcfg=0x????\\Zn\\n    USB disks mask.\\n"
msgstr " * \\Z4usbportcfg=0x????\\Zn\\n   USB 磁碟遮罩。\\n"

#: menu.sh:936
msgid "No synoinfo entries to remove"
msgstr "沒有 Synoinfo 參數被删除"

#: menu.sh:944
msgid "Select synoinfo entry to remove"
msgstr "選擇要删除的參數"

#: menu.sh:974
msgid "Downloading old pat to extract synology .pat extractor..."
msgstr "下載舊 pat，選取 .pat 解密程式中..."

#: menu.sh:980 menu.sh:1114
msgid "Check internet or cache disk space.\\nError: %d:%d"
msgstr "請檢查網際網路或快取磁碟空間。\\n錯誤: %d:%d"

#: menu.sh:1019
msgid "Uncompressed tar"
msgstr "未壓縮 tar"

#: menu.sh:1023
msgid "Compressed tar"
msgstr "壓縮 tar"

#: menu.sh:1027
msgid "Encrypted"
msgstr "已加密"

#: menu.sh:1031
msgid "Could not determine if pat file is encrypted or not, maybe corrupted, try again!"
msgstr "無法確定 pat 檔案是否加密，可能已損壞，請重試！"

#: menu.sh:1038 menu.sh:1130
msgid "Disassembling %s: "
msgstr "解壓縮 %s: "

#: menu.sh:1045
msgid "Extractor cached."
msgstr "已存在解密程式。"

#: menu.sh:1051 menu.sh:1054
msgid "Extracting ..."
msgstr "解壓中..."

#: menu.sh:1087
msgid "%s cached."
msgstr "%s 已快取。"

#: menu.sh:1091
msgid "Cleaning cache ..."
msgstr "清除快取..."

#: menu.sh:1100
msgid "Based on the current network situation, switch to %s mirror to downloading."
msgstr "根據目前的網路狀況，已切換到 %s 鏡像伺服器進行下載。"

#: menu.sh:1103
msgid "Downloading %s ..."
msgstr "下載 %s 中..."

#: menu.sh:1120
msgid "Checking hash of %s: "
msgstr "檢查 %s 的雜湊值: "

#: menu.sh:1123
msgid "md5 hash of pat not match, Please reget pat data from the version menu and try again!"
msgstr "pat 的 md5 雜湊值不相符，請自版本功能表中重新取得 pat 資料並再試一次！"

#: menu.sh:1126 menu.sh:1142 menu.sh:1152
msgid "OK"
msgstr "OK"

#: menu.sh:1137
msgid "Setting hash: "
msgstr "設定雜湊值: "

#: menu.sh:1144
msgid "Copying files: "
msgstr "複製檔案: "

#: menu.sh:1168
msgid "Addon %s not found!"
msgstr "增益集 %s 未找到!"

#: menu.sh:1179
msgid "EMMC is used."
msgstr "EMMC 被使用."

#: menu.sh:1181
msgid "EMMC is not used. remove mmc modules."
msgstr "EMMC 不被使用, 移除驅動."

#: menu.sh:1202
msgid "Cleaning ..."
msgstr "清除中..."

#: menu.sh:1204
msgid "Ready!"
msgstr "已就绪！"

#: menu.sh:1229
msgid "Switch LKM version:"
msgstr "切換 LKM 版本:"

#: menu.sh:1230
msgid "HDD sort(hotplug):"
msgstr "HDD 排序 (熱插拔):"

#: menu.sh:1233
msgid "Switch direct boot:"
msgstr "切換直接開機:"

#: menu.sh:1235
msgid "Timeout of get ip in boot:"
msgstr "開機時取得 IP 的逾時時間:"

#: menu.sh:1236
msgid "Timeout of boot wait:"
msgstr "開機逾時時間:"

#: menu.sh:1237
msgid "kernel switching method:"
msgstr "核心切換方式:"

#: menu.sh:1239
msgid "Reboot on kernel panic:"
msgstr "核心崩潰時重新啟動:"

#: menu.sh:1241
msgid "Set static IP"
msgstr "設定靜態 IP"

#: menu.sh:1242
msgid "Set wireless account"
msgstr "設定無線網路帳號"

#: menu.sh:1243
msgid "Edit user config file manually"
msgstr "手動編輯使用者設定檔"

#: menu.sh:1244
msgid "Edit grub.cfg file manually"
msgstr "手動編輯 grub.cfg"

#: menu.sh:1245
msgid "Try to recovery a DSM installed system"
msgstr "嘗試回復已安裝 DSM 的系統"

#: menu.sh:1246
msgid "Show disks information"
msgstr "顯示磁碟資訊"

#: menu.sh:1248
msgid "show/modify the current pat data"
msgstr "顯示/修改目前 pat 資料"

#: menu.sh:1250
msgid "Allow downgrade installation"
msgstr "允許降級安裝"

#: menu.sh:1251
msgid "Format disk(s) # Without loader disk"
msgstr "格式化磁碟(s) # 不含開機碟"

#: menu.sh:1252
msgid "Reset DSM system password"
msgstr "重設 DSM 系統密碼"

#: menu.sh:1253
msgid "Force enable telnet of DSM system"
msgstr "強制啟用 DSM 系統的 telnet"

#: menu.sh:1254
msgid "Save modifications of '/opt/rr'"
msgstr "儲存「/opt/rr」的修改"

#: menu.sh:1256
msgid "Custom dts file # Need rebuild"
msgstr "自訂 dts 檔案 # 需要重新編譯"

#: menu.sh:1258
msgid "Custom patch script # Developer"
msgstr "自訂修補指令碼 # Developer"

#: menu.sh:1260
msgid "Use EMMC as the system disk:"
msgstr "使用 EMMC 作為系統碟:"

#: menu.sh:1262
msgid "Clone bootloader disk to another disk"
msgstr "將開機碟複製到另一個磁碟"

#: menu.sh:1263
msgid "Report bugs to the author"
msgstr "回報問題給作者"

#: menu.sh:1264
msgid "Install development tools"
msgstr "安裝開發者工具"

#: menu.sh:1265
msgid "Show QR logo:"
msgstr "顯示 QR 商標:"

#: menu.sh:1266
msgid "Set global proxy"
msgstr "設定全域代理伺服器"

#: menu.sh:1267
msgid "Set github proxy"
msgstr "設定 github 代理伺服器"

#: menu.sh:1270 menu.sh:1294 menu.sh:1306 menu.sh:1326 menu.sh:1349 menu.sh:1373 menu.sh:1378 menu.sh:1390 menu.sh:1399 menu.sh:1421 menu.sh:1522 menu.sh:1529 menu.sh:1547 menu.sh:1560 menu.sh:1563 menu.sh:1576 menu.sh:1580 menu.sh:1581 menu.sh:1586
#: menu.sh:1590 menu.sh:1605 menu.sh:1607 menu.sh:1630 menu.sh:1634 menu.sh:1641 menu.sh:1647 menu.sh:1665 menu.sh:1667 menu.sh:1671 menu.sh:1685 menu.sh:1687 menu.sh:1691 menu.sh:1694 menu.sh:1709 menu.sh:1717 menu.sh:1721 menu.sh:1736 menu.sh:1741
#: menu.sh:1752 menu.sh:1784 menu.sh:1788 menu.sh:1794 menu.sh:1800 menu.sh:1806 menu.sh:1837 menu.sh:1850 menu.sh:1854 menu.sh:1864 menu.sh:1869 menu.sh:1876 menu.sh:1878 menu.sh:1890 menu.sh:1901 menu.sh:1923 menu.sh:1934
msgid "Advanced"
msgstr "進階"

#: menu.sh:1271
msgid "Advanced option"
msgstr "進階選項"

#: menu.sh:1295 menu.sh:1307 menu.sh:1327
msgid "Choose a time(seconds)"
msgstr "選擇一個時間 (秒)"

#: menu.sh:1337
msgid "Temporary IP: (UI will not refresh)"
msgstr "臨時 IP: (UI 不會重整)"

#: menu.sh:1374
msgid "Setting IP ..."
msgstr "設定 IP..."

#: menu.sh:1379
msgid "Scanning ..."
msgstr "掃瞄中..."

#: menu.sh:1382
msgid "Scanned SSIDs:\\n"
msgstr "已找到的 SSID:\\n"

#: menu.sh:1400
msgid "Invalid SSID/PSK, retry?"
msgstr "無效的 SSID/PSK，要重試 ?"

#: menu.sh:1422
msgid "Setting ..."
msgstr "設定中..."

#: menu.sh:1520
msgid "\\nTotal of ports: %s\\n"
msgstr "\\n埠總數: %s\\n"

#: menu.sh:1521
msgid "\\nPorts with color \\Z1red\\Zn as DUMMY, color \\Z2\\Zbgreen\\Zn has drive connected."
msgstr "\\n\\Z1紅色\\Zn 為空，\\Z2\\Zb綠色\\Zn 為已連接磁碟機。"

#: menu.sh:1528
msgid "pat: (editable)"
msgstr "pat: (可編輯)"

#: menu.sh:1544
msgid "This feature will allow you to downgrade the installation by removing the VERSION file from the first partition of all disks.\\n"
msgstr "此功能透過删除所有磁碟第一個分區的 VERSION 檔案以允許你降級安裝。\\n"

#: menu.sh:1545
msgid "Therefore, please insert all disks before continuing.\\n"
msgstr "因此，請插入所有磁碟後再繼續。\\n"

#: menu.sh:1546 menu.sh:1587
msgid "Warning:\\nThis operation is irreversible. Please backup important data. Do you want to continue?"
msgstr "警告:\\n該作業不可逆，請提前備份重要資料。是否繼續？"

#: menu.sh:1561
msgid "Removing ..."
msgstr "移除中 ..."

#: menu.sh:1562
msgid "Remove VERSION file for all disks completed."
msgstr "已移除所有磁碟的 VERSION 檔案。"

#: menu.sh:1577 menu.sh:1785
msgid "No disk found!"
msgstr "未找到磁碟！"

#: menu.sh:1591
msgid "Warning:\\nThe current hds is in raid, do you still want to format them?"
msgstr "警告:\\n目前的硬碟使用 raid 中，是否仍要格式化？"

#: menu.sh:1606
msgid "Formatting ..."
msgstr "格式化中 ..."

#: menu.sh:1608
msgid "Formatting is complete."
msgstr "格式化完成。"

#: menu.sh:1631
msgid "The installed Syno system not found in the currently inserted disks!"
msgstr "未在目前插入的硬碟中找到已安裝的 syno 系統！"

#: menu.sh:1635
msgid "Choose a user name"
msgstr "選擇使用者"

#: menu.sh:1642
msgid "Type a new password for user '%s'"
msgstr "輸入使用者 '%s' 的新密碼"

#: menu.sh:1648
msgid "Invalid password"
msgstr "無效的密碼"

#: menu.sh:1666
msgid "Resetting ..."
msgstr "重設中 ..."

#: menu.sh:1668
msgid "Password reset completed."
msgstr "重設密碼完成。"

#: menu.sh:1672
msgid "Please insert all disks before continuing.\\n"
msgstr "請先插入所有磁碟，然後再繼續。\\n"

#: menu.sh:1686
msgid "Enabling ..."
msgstr "啟用中..."

#: menu.sh:1688
msgid "Telnet is enabled."
msgstr "Telnet 已啟用。"

#: menu.sh:1692
msgid "Warning:\\nDo not terminate midway, otherwise it may cause damage to the RR. Do you want to continue?"
msgstr "警告:\\n請不要中途停止，否則將導致 RR 開機損毀，是否繼續？"

#: menu.sh:1695
msgid "Saving ...\\n(It usually takes 5-10 minutes, please be patient and wait.)"
msgstr "儲存中...\\n(通常需要 5-10 分鐘，請耐心等候)。"

#: menu.sh:1710
msgid "Save is complete."
msgstr "儲存完成。"

#: menu.sh:1716
msgid "Or upload the dts file to %s via DUFS, Will be automatically imported when building."
msgstr "或透過 DUFS 上傳 dts 檔案到 %s，編譯時會自動匯入。"

#: menu.sh:1722
msgid "Currently, only dts format files are supported. Please prepare and click to confirm uploading.\\n(saved in /mnt/p3/users/)"
msgstr "目前只支援 dts 格式的檔案，請準備並點選確認上傳。\\n(儲存於 /mnt/p3/users/ 中)"

#: menu.sh:1737
msgid "Not a valid dts file, please try again!"
msgstr "dts 檔案無效，請重試！"

#: menu.sh:1742
msgid "A valid dts file, Automatically import at compile time."
msgstr "dts 檔案有效，將在編譯時自動匯入。"

#: menu.sh:1748
msgid "This option is only informative.\\n\\n"
msgstr "此選項僅供參考。\\n\\n"

#: menu.sh:1749
msgid "This program reserves an interface for ramdisk custom patch scripts.\\n"
msgstr "該程式為 ramdisk 自訂修補指令碼保留一個介面。\\n"

#: menu.sh:1750
msgid "Call timing: called before ramdisk packaging.\\n"
msgstr "調用時機: 在 ramdisk 封裝前調用。\\n"

#: menu.sh:1751
msgid "Location: /mnt/p3/scripts/*.sh\\n"
msgstr "位置: /mnt/p3/scripts/*.sh\\n"

#: menu.sh:1789
msgid "Choose a disk to clone to"
msgstr "選擇要複製磁碟的目標"

#: menu.sh:1795
msgid "No disk selected!"
msgstr "未選擇磁碟！"

#: menu.sh:1801
msgid "Disk %s size is less than 1GB and cannot be cloned!"
msgstr "磁碟 %s 大小小於 1GB，無法複製！"

#: menu.sh:1805
msgid "Warning:\\nDisk %s will be formatted and written to the bootloader. Please confirm that important data has been backed up. \\nDo you want to continue?"
msgstr "警告:\\n磁碟 %s 將被格式化並寫入開機程式。請確認重要資料已備份。\\n是否要繼續？"

#: menu.sh:1838
msgid "Cloning ..."
msgstr "複製中..."

#: menu.sh:1840
msgid "Bootloader has been cloned to disk %s, please remove the current bootloader disk!\\nReboot?"
msgstr "開機程式已複製到磁碟 %s，請刪除目前的開機磁！\\n重新啟動？"

#: menu.sh:1851
msgid "Please via %s to download the logs,\\nAnd go to github to create an issue and upload the logs."
msgstr "請透過 %s 下載記錄，\\n並前往 github 建立問題並上傳記錄。"

#: menu.sh:1855
msgid "Please go to github to create an issue and upload the logs."
msgstr "請前往 github 建立問題並上傳記錄。"

#: menu.sh:1859
msgid "\\Z1No logs found!\\Zn\\n\\n"
msgstr "\\Z1未找到記錄！\\Zn\\n\\n"

#: menu.sh:1860
msgid "Please do as follows:\\n"
msgstr "請執行以下操作:\\n"

#: menu.sh:1861
msgid " 1. Add dbgutils in addons and rebuild.\\n"
msgstr " 1. 在增益集中加入 dbgutils 並重建。\\n"

#: menu.sh:1862
msgid " 2. Wait 10 minutes after booting.\\n"
msgstr " 2. 開機後等待 10 分鐘。\\n"

#: menu.sh:1863
msgid " 3. Reboot into RR and go to this option.\\n"
msgstr " 3. 重新啟動進入 RR 並前往此選項。\\n"

#: menu.sh:1870
msgid "This option only installs opkg package management, allowing you to install more tools for use and debugging. Do you want to continue?"
msgstr "該選項僅安裝 opkg 套件管理工具，讓你能?安裝更多的工具以供使用和除錯，是否繼續？"

#: menu.sh:1877
msgid "opkg installing ..."
msgstr "opkg 安裝中..."

#: menu.sh:1879
msgid "opkg install is complete. Please reconnect to ssh/web, or execute 'source ~/.bashrc'"
msgstr "opkg 安裝完成。請重新連線 ssh/web，或者執行「source ~/.bashrc」"

#: menu.sh:1891
msgid "Please enter a proxy server url.(e.g., http://192.168.1.1:7981/)"
msgstr "請輸入代理伺服器網址。(如，http://192.168.1.1:7981/)"

#: menu.sh:1902 menu.sh:1935
msgid "Invalid proxy server url, continue?"
msgstr "代理伺服器網址無效，是否繼續？"

#: menu.sh:1924
msgid "Please enter a proxy server url.(e.g., https://mirror.ghproxy.com/)"
msgstr "請輸入代理伺服器網址。(如，https://mirror.ghproxy.com/)"

#: menu.sh:1955 menu.sh:1990 menu.sh:1997
msgid "Try recovery DSM"
msgstr "嘗試回復 DSM 系統"

#: menu.sh:1956
msgid "Trying to recovery a DSM installed system ..."
msgstr "嘗試回復已安裝的 DSM 系統..."

#: menu.sh:1984
msgid "Found a installation:\\nModel: %s\\nProductversion: %s"
msgstr "找到已安裝:\\n型號:  %s\\n版本: %s"

#: menu.sh:1988
msgid "\\nSerial: %s"
msgstr "\\nSN: %s"

#: menu.sh:1998
msgid "Unfortunately I couldn't mount the DSM partition!"
msgstr "很遺憾，無法掛載 DSM 分割區！"

#: menu.sh:2006 menu.sh:2012 menu.sh:2035
msgid "Edit with caution"
msgstr "請謹慎編輯"

#: menu.sh:2046
msgid "Alert"
msgstr "警告"

#: menu.sh:2047
msgid "Config changed, would you like to rebuild the loader?"
msgstr "設置已變更，是否重新編譯開機檔？"

#: menu.sh:2059 menu.sh:2439
msgid "Choose a language"
msgstr "選擇語言"

#: menu.sh:2073
msgid "Choose a layout"
msgstr "選擇佈局"

#: menu.sh:2085
msgid "Choice a keymap"
msgstr "選擇鍵盤"

#: menu.sh:2104 menu.sh:2157 menu.sh:2208 menu.sh:2275 menu.sh:2280 menu.sh:2285 menu.sh:2290 menu.sh:2297 menu.sh:2305 menu.sh:2313 menu.sh:2321
msgid "Update %s"
msgstr "更新 %s"

#: menu.sh:2107
msgid "Checking last version ..."
msgstr "檢測最新版本..."

#: menu.sh:2118 menu.sh:2121
msgid "Error checking new version.\\nError: TAG is %s"
msgstr "檢查新版本時錯誤。\\n錯誤: TAG 為 %s"

#: menu.sh:2128
msgid "No new version."
msgstr "沒有新版本。"

#: menu.sh:2132
msgid "No new version. Actual version is %s\\nForce update?"
msgstr "沒有新版本。實際版本為 %s\\n強制更新？"

#: menu.sh:2141
msgid "Downloading ..."
msgstr "下載中..."

#: menu.sh:2145 menu.sh:2148
msgid "Error downloading new version.\\nError: %d:%d"
msgstr "下載新版本時錯誤。\\n錯誤: %d:%d"

#: menu.sh:2159 menu.sh:2210
msgid "Extracting last version"
msgstr "解壓縮最新版本"

#: menu.sh:2163
msgid "Error extracting update file"
msgstr "解壓縮更新檔錯誤"

#: menu.sh:2170
msgid "Checksum do not match!"
msgstr "總和檢查碼不相符！"

#: menu.sh:2179
msgid "The current version does not support upgrading to the latest update.zip. Please remake the bootloader disk!"
msgstr "目前版本不支援升級到最新的 update.zip。請重新製作開機程式磁碟！"

#: menu.sh:2184
msgid "Installing new files ..."
msgstr "安裝新的檔案..."

#: menu.sh:2201
msgid "RR updated with success to %s!\\nReboot?"
msgstr "RR 更新成功 %s！\\n重新開機？"

#: menu.sh:2216
msgid "Installing new %s ..."
msgstr "安裝新的 %s..."

#: menu.sh:2245 menu.sh:2248
msgid "%s updated with success!"
msgstr "%s 更新成功！"

#: menu.sh:2260
msgid "Update all"
msgstr "更新全部"

#: menu.sh:2261
msgid "Update RR"
msgstr "更新 RR"

#: menu.sh:2262
msgid "Update addons"
msgstr "更新增益集"

#: menu.sh:2263
msgid "Update modules"
msgstr "更新模組"

#: menu.sh:2264
msgid "Update LKMs"
msgstr "更新 LKM"

#: menu.sh:2265
msgid "Local upload"
msgstr "本地上傳"

#: menu.sh:2266
msgid "Pre Release:"
msgstr "預發佈:"

#: menu.sh:2270
msgid "Manually uploading update.zip,addons.zip,modules.zip,rp-lkms.zip to /tmp/ will skip the download."
msgstr "手動上傳 update.zip,addons.zip,modules.zip,rp-lkms.zip 到 /tmp/ 將跳過下載。"

#: menu.sh:2275 menu.sh:2305
msgid "addons"
msgstr "增益集"

#: menu.sh:2280 menu.sh:2313
msgid "modules"
msgstr "模組"

#: menu.sh:2285 menu.sh:2321
msgid "LKMs"
msgstr "LKMs"

#: menu.sh:2290 menu.sh:2297
msgid "RR"
msgstr "RR"

#: menu.sh:2332
msgid "Or upload update.zip, addons.zip, modules.zip, rp-lkms.zip to /tmp/ via DUFS will skip the download.\\n"
msgstr "或透過 DUFS 上傳 update.zip,addons.zip,modules.zip,rp-lkms.zip 到 /tmp/ 將跳過下載。\\n"

#: menu.sh:2338
msgid "Please keep the attachment name consistent with the attachment name on Github.\\n"
msgstr "請保持附件名稱與 Github 上的附件名稱一致。\\n"

#: menu.sh:2339
msgid "Upload update*.zip will update RR.\\n"
msgstr "上傳 update*.zip 將更新 RR。\\n"

#: menu.sh:2340
msgid "Upload addons*.zip will update Addons.\\n"
msgstr "上傳 addons*.zip 將更新增益集。\\n"

#: menu.sh:2341
msgid "Upload modules*.zip will update Modules.\\n"
msgstr "上傳 modules*.zip 將更新模組。\\n"

#: menu.sh:2342
msgid "Upload rp-lkms*.zip will update LKMs.\\n"
msgstr "上傳 rp-lkms*.zip 將更新 LKM。\\n"

#: menu.sh:2397
msgid "This person is very lazy and hasn't written anything."
msgstr "這個人很懶，什麼也沒有寫。"

#: menu.sh:2419
msgid "Choose a model"
msgstr "選擇型號"

#: menu.sh:2421
msgid "Choose a version"
msgstr "選擇版本"

#: menu.sh:2423
msgid "Parse pat"
msgstr "解析 pat"

#: menu.sh:2425
msgid "Addons menu"
msgstr "增益集"

#: menu.sh:2426
msgid "Modules menu"
msgstr "模組"

#: menu.sh:2427
msgid "Cmdline menu"
msgstr "設定 Cmdline"

#: menu.sh:2428
msgid "Synoinfo menu"
msgstr "設定 Synoinfo"

#: menu.sh:2430
msgid "Advanced menu"
msgstr "進階設定"

#: menu.sh:2433
msgid "Build the loader"
msgstr "編譯開機檔"

#: menu.sh:2437
msgid "Boot the loader"
msgstr "開機"

#: menu.sh:2440
msgid "Choose a keymap"
msgstr "選擇鍵盤"

#: menu.sh:2442
msgid "Clean disk cache"
msgstr "清除磁碟快取"

#: menu.sh:2444
msgid "Update menu"
msgstr "更新"

#: menu.sh:2445
msgid "Notepad"
msgstr "記事本"

#: menu.sh:2517
msgid "Choose a action"
msgstr "選擇動作"

#: menu.sh:2518
msgid "Poweroff"
msgstr "關機"

#: menu.sh:2519
msgid "Reboot"
msgstr "重新開機"

#: menu.sh:2520
msgid "Reboot to RR"
msgstr "重新開機進入 RR"

#: menu.sh:2521
msgid "Back to shell"
msgstr "退回到 shell"

#: menu.sh:2547
msgid "Call \\033[1;32mmenu.sh\\033[0m to return to menu"
msgstr "執行 \\033[1;32mmenu.sh\\033[0m 重新回到功能表"

#~ msgid "Load local pat"
#~ msgstr "載入本地 pat"