RROrg-rr/files/initrd/opt/rr/lang/zh_HK.po

# Chinese translations for RR package.
# Copyright (C) 2023 THE RR'S COPYRIGHT HOLDER
# This file is distributed under the same license as the RR package.
# Ing <wjz304>, 2023.
#
msgid ""
msgstr ""
"Project-Id-Version: RR\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-01-23 13:12+0800\n"
"PO-Revision-Date: 2024-01-23 13:18+0800\n"
"Last-Translator: Ing <wjz304>\n"
"Language-Team: Chinese (HongKong) <i18n-zh@googlegroups.com>\n"
"Language: zh_HK\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 3.4.2\n"

#: boot.sh:8 init.sh:9 menu.sh:9
msgid "Loader is not init!"
msgstr "引導未初始化!"

#: boot.sh:10 init.sh:107
msgid "Loader is not configured!"
msgstr "引導未設置!"

#: boot.sh:20 init.sh:14
msgid "Welcome to %s"
msgstr "Welcome to %s"

#: boot.sh:33
msgid "DSM zImage changed"
msgstr "DSM zImage 已變更"

#: boot.sh:36 menu.sh:1236
msgid ""
"zImage not patched,\\nPlease upgrade the bootloader version and try again."
"\\nPatch error:\\n"
msgstr "zImage patch 失敗,\\n請升級引導版本並重試.\\nPatch 錯誤:\\n"

#: boot.sh:45
msgid "DSM Ramdisk changed"
msgstr "DSM Ramdisk 已變更"

#: boot.sh:48 menu.sh:1242
msgid ""
"Ramdisk not patched,\\nPlease upgrade the bootloader version and try again."
"\\nPatch error:\\n"
msgstr "Ramdisk patch 失敗,\\n請升級引導版本並重試.\\nPatch 錯誤:\\n"

#: boot.sh:67
msgid "Model:"
msgstr "型號: "

#: boot.sh:68
msgid "Build:"
msgstr "版本: "

#: boot.sh:69
msgid "LKM:  "
msgstr "LKM:  "

#: boot.sh:70
msgid "DMI:  "
msgstr "DMI:  "

#: boot.sh:71
msgid "CPU:  "
msgstr "CPU:  "

#: boot.sh:72
msgid "MEM:  "
msgstr "MEM:  "

#: boot.sh:75
msgid ""
"The current version of bootloader does not support booting %s-%s, please "
"upgrade and rebuild."
msgstr "當前版本的開機磁碟不支持引導 %s-%s, 請升級並重新編譯."

#: boot.sh:87
msgid ""
"Please insert at least one sata/scsi disk for system installation, except "
"for the bootloader disk."
msgstr "除引導盤外, 請至少插入一塊 sata/scsi 磁片進行系統安裝."

#: boot.sh:166
msgid "Cmdline:\\n"
msgstr "Cmdline:\\n"

#: boot.sh:172
msgid "Reboot to boot directly in DSM"
msgstr "重啓並直接進入 DSM 引導"

#: boot.sh:178 init.sh:120
msgid "Detected %s network cards."
msgstr "檢測到 %s 個網卡."

#: boot.sh:179 init.sh:121
msgid "Checking Connect."
msgstr "檢查連接."

#: boot.sh:199
msgid "Waiting IP.(For reference only)"
msgstr "獲取 IP.(僅供參考)"

#: boot.sh:206 init.sh:146
msgid "DOWN"
msgstr "關閉"

#: boot.sh:210 init.sh:150
msgid "NOT CONNECTED"
msgstr "未連接"

#: boot.sh:214 init.sh:154
msgid "TIMEOUT (Please check the IP on the router.)"
msgstr "超時 (請檢查路由器上的 IP.)"

#: boot.sh:220
msgid "Access \\033[1;34mhttp://%s:5000\\033[0m to connect the DSM via web."
msgstr "在瀏覽器中訪問 \\033[1;34mhttp://%s:5000\\033[0m 連結 DSM."

#: boot.sh:232
msgid "%2ds (Changing access(ssh/web) status will interrupt boot)"
msgstr "%2ds ((ssh/web)链接状态改變將中斷啟動)"

#: boot.sh:236
msgid "access(ssh/web) status has changed and booting is interrupted."
msgstr "(ssh/web)链接狀態已改變, 啟動被中斷."

#: boot.sh:246
msgid "Loading DSM kernel ..."
msgstr "加載 DSM kernel  ..."

#: boot.sh:262
msgid "Warning, running kexec with --noefi param, strange things will happen!!"
msgstr "警告, 使用'--noefi'參數運行'kexec', 可能有不好的事情發生!!"

#: boot.sh:267
msgid "Booting ..."
msgstr "引導中 ..."

#: boot.sh:269
msgid ""
"[This interface will not be operational. Please wait a few minutes.\\nFind "
"DSM via http://find.synology.com/ or Synology Assistant and connect.]"
msgstr ""
"[該介面已不可操作. 請在數分鐘後\\n通過 http://find.synology.com/ 或者 "
"Synology Assistant 查找 DSM 並連結.]"

#: init.sh:23
msgid "Network devices not found!"
msgstr "網卡未找到!"

#: init.sh:84
msgid "Loader disk neither USB or SATA/SCSI/NVME/MMC DoM"
msgstr "引導磁碟僅支持 USB 或者 SATA/SCSI/NVME/MMC DoM"

#: init.sh:92
msgid "Loader disk:"
msgstr "引導盤:"

#: init.sh:100
msgid "Loading keymap"
msgstr "加載 keymap"

#: init.sh:110
msgid "User requested edit settings."
msgstr "用戶觸發編輯設定."

#: init.sh:139
msgid "Waiting IP."
msgstr "獲取 IP."

#: init.sh:160
msgid ""
"Access \\033[1;34mhttp://%s:7681\\033[0m to configure the loader via web "
"terminal."
msgstr ""
"在瀏覽器中訪問 \\033[1;34mhttp://%s:7681\\033[0m 進入 WEB 終端進行配寘."

#: init.sh:170
msgid "Call \\033[1;32mmenu.sh\\033[0m to configure loader"
msgstr "執行 \\033[1;32mmenu.sh\\033[0m 進入設定選單"

#: init.sh:172
msgid "User config is on"
msgstr "用戶設定檔位於"

#: init.sh:173
msgid "TTYD: \\033[1;34mhttp://rr:7681/\\033[0m"
msgstr "TTYD: \\033[1;34mhttp://rr:7681/\\033[0m"

#: init.sh:174
msgid "DUFS: \\033[1;34mhttp://rr:7304/\\033[0m"
msgstr "DUFS: \\033[1;34mhttp://rr:7304/\\033[0m"

#: init.sh:175
msgid "TTYD&DUFS: \\033[1;34mhttp://rr:80/\\033[0m"
msgstr "TTYD&DUFS: \\033[1;34mhttp://rr:80/\\033[0m"

#: init.sh:177
msgid "Default SSH Root password is"
msgstr "默認 SSH 的 root 密碼為"

#: init.sh:194
msgid ""
"You have less than 4GB of RAM, if errors occur in loader creation, please "
"increase the amount of memory."
msgstr "您的 RAM 不足 4GB, 如果在創建引導時出現錯誤, 請新增記憶體."

#: menu.sh:100 menu.sh:134 menu.sh:177
msgid "Model"
msgstr "型號"

#: menu.sh:101
msgid "Reading models"
msgstr "讀取型號"

#: menu.sh:111
msgid "Compatibility judgment"
msgstr "相容性判斷"

#: menu.sh:132
msgid "Disable flags restriction"
msgstr "禁用標誌限制"

#: menu.sh:133
msgid "Show all models"
msgstr "顯示所有型號"

#: menu.sh:135
msgid "Choose the model"
msgstr "選擇型號"

#: menu.sh:227 menu.sh:238 menu.sh:244 menu.sh:255 menu.sh:281 menu.sh:301
#: menu.sh:351
msgid "Product Version"
msgstr "版本"

#: menu.sh:228
msgid "Choose a product version"
msgstr "選擇版本"

#: menu.sh:239
msgid ""
"The current version has been set to %s. Do you want to reset the version?"
msgstr "當前版本已設定為 %s. 是否要重置版本?"

#: menu.sh:245
msgid ""
"This version does not support UEFI startup, Please select another version or "
"switch the startup mode."
msgstr "該版本不支持 UEFI 啟動, 請選擇其他版本或者切換啟動模式."

#: menu.sh:256
msgid "Get pat data ..."
msgstr "獲取 pat 數據 ..."

#: menu.sh:275
msgid ""
"Failed to get pat data,\\nPlease manually fill in the URL and md5sum of the "
"corresponding version of pat."
msgstr "獲取 pat 數據失敗,\\n請手動填寫相應版本 pat 的 URL 和 MD5."

#: menu.sh:279
msgid "Successfully to get pat data,\\nPlease confirm or modify as needed."
msgstr "獲取 pat 數據成功,\\n請確認或者按需修改."

#: menu.sh:282
msgid "Retry"
msgstr "重試"

#: menu.sh:302 menu.sh:404
msgid "Reconfiguring Synoinfo, Addons and Modules"
msgstr "重新配寘 Syninfo, 挿件和模塊"

#: menu.sh:336
msgid ""
"You have selected the %s and %s.\\n'Parse Pat' will overwrite the previous "
"selection.\\nDo you want to continue?"
msgstr "你已經選擇了 %s 和 %s\\n‘解析 Pat' 將覆蓋先前的選擇.\\n是否繼續?"

#: menu.sh:337
msgid "Parse Pat"
msgstr "解析 Pat"

#: menu.sh:345
msgid "No pat file found in users folder!\\n"
msgstr "在用戶資料夾中找不到 pat 檔案!\\n"

#: menu.sh:346
msgid ""
"Please upload the pat file to /mnt/p3/users/ folder via DUFS and re-enter "
"this option.\\n"
msgstr ""
"請透過 DUFS 將 pat 檔案上傳到 /mnt/p3/users/ 資料夾，然後重新进入此選項.\\n"

#: menu.sh:347 menu.sh:357 menu.sh:2329 menu.sh:2393 menu.sh:2403 menu.sh:2420
#: menu.sh:2440
msgid "Update"
msgstr "更新"

#: menu.sh:352
msgid "Choose a pat file"
msgstr "選擇一个 pat 檔案"

#: menu.sh:358 menu.sh:370 menu.sh:1118
msgid "pat Invalid, try again!"
msgstr "無效的 pat, 請重試!"

#: menu.sh:363
msgid "Parse %s ..."
msgstr "解析 %s ..."

#: menu.sh:388
msgid "Currently, %s is not supported."
msgstr "目前，不支援 %s."

#: menu.sh:400
msgid "Currently, %s of %s is not supported."
msgstr "目前，不支援 %s-%s,"

#: menu.sh:461 menu.sh:1252 menu.sh:2509
msgid "Main menu"
msgstr "主選單"

#: menu.sh:462 menu.sh:1253
msgid "Making ..."
msgstr "編譯中 ..."

#: menu.sh:464 menu.sh:1255
msgid "Error"
msgstr "錯誤"

#: menu.sh:497 menu.sh:514 menu.sh:519 menu.sh:525 menu.sh:536 menu.sh:544
#: menu.sh:567 menu.sh:574 menu.sh:578 menu.sh:592 menu.sh:596 menu.sh:604
#: menu.sh:607
msgid "Addons"
msgstr "挿件"

#: menu.sh:498 menu.sh:628 menu.sh:804 menu.sh:939 menu.sh:2510
msgid "Choose a option"
msgstr "設定"

#: menu.sh:499
msgid "Add an addon"
msgstr "添加挿件"

#: menu.sh:500
msgid "Delete addons"
msgstr "删除挿件"

#: menu.sh:501
msgid "Show all addons"
msgstr "顯示所有挿件"

#: menu.sh:502
msgid "Upload a external addon"
msgstr "上傳外部挿件"

#: menu.sh:503 menu.sh:635 menu.sh:802 menu.sh:937 menu.sh:1313 menu.sh:2327
#: menu.sh:2507 menu.sh:2583
msgid "Exit"
msgstr "退出"

#: menu.sh:515
msgid "No available addons to add"
msgstr "沒有可用的挿件可添加"

#: menu.sh:520
msgid "Select an addon"
msgstr "選擇挿件"

#: menu.sh:526
msgid "Type a optional params to addon"
msgstr "輸入挿件的加載參數"

#: menu.sh:537
msgid "No user addons to remove"
msgstr "沒有要删除的用戶挿件"

#: menu.sh:545
msgid "Select addon to remove"
msgstr "選擇要删除的挿件"

#: menu.sh:558
msgid ""
"Name with color \"\\Z4blue\\Zn\" have been added, with color \"black\" are "
"not added.\\n\\n"
msgstr "名稱顏色為\"\\Z4藍色\\Zn\"的為已添加, 顏色為\"黑色\"的為未添加..\\n\\n"

#: menu.sh:573 menu.sh:707 menu.sh:1760 menu.sh:2391
msgid ""
"This feature is only available when accessed via ssh (Requires a terminal "
"that supports ZModem protocol).\\n"
msgstr "此功能僅通過 ssh 訪問時可用(需要支援 ZModem 協定的終端).\\n"

#: menu.sh:579
msgid "Please upload the *.addons file."
msgstr "請上傳 *.addons 檔案."

#: menu.sh:593 menu.sh:742 menu.sh:2421 menu.sh:2441
msgid "Not a valid file, please try again!"
msgstr "不是有效的檔案, 請重試!"

#: menu.sh:597
msgid "The addon already exists. Do you want to overwrite it?"
msgstr "該挿件已存在, 是否覆盖?"

#: menu.sh:605
msgid "Addon '%s' added to loader, Please enable it in 'Add an addon' menu."
msgstr "挿件 '%s' 已添加到引導中, 請在'添加挿件'選單中開啟."

#: menu.sh:608
msgid "File format not recognized!"
msgstr "檔案格式無法識別!"

#: menu.sh:627 menu.sh:641 menu.sh:654 menu.sh:691 menu.sh:708 menu.sh:718
#: menu.sh:721 menu.sh:737 menu.sh:741 menu.sh:755 menu.sh:761
msgid "Modules"
msgstr "模塊"

#: menu.sh:629
msgid "Show/Select modules"
msgstr "顯示/選擇模塊"

#: menu.sh:630
msgid "Select loaded modules"
msgstr "選擇已識別的模塊"

#: menu.sh:631
msgid "Upload a external module"
msgstr "上傳一個外部模塊"

#: menu.sh:632
msgid "Deselect i915 with dependencies"
msgstr "取消選擇 i915 及其依賴模組"

#: menu.sh:633
msgid "Priority use of official drivers:"
msgstr "優先使用官方驅動:"

#: menu.sh:634
msgid "Edit modules that need to be copied to DSM"
msgstr "編輯需要複製到 DSM 的模塊"

#: menu.sh:642
msgid "Reading modules ..."
msgstr "讀取模塊中 ..."

#: menu.sh:655
msgid "Select all"
msgstr "全選全部"

#: menu.sh:656
msgid "Deselect all"
msgstr "取消全選"

#: menu.sh:657
msgid "Select modules to include"
msgstr "選擇要加載的挿件"

#: menu.sh:692
msgid "Selecting loaded modules"
msgstr "選擇已識別的模塊"

#: menu.sh:713
msgid ""
"This function is experimental and dangerous. If you don't know much, please "
"exit.\\n"
msgstr "該功能是實驗性的且危險的, 如果你不瞭解, 請退出.\\n"

#: menu.sh:714
msgid ""
"The imported .ko of this function will be implanted into the corresponding "
"arch's modules package, which will affect all models of the arch.\\n"
msgstr ""
"該功能導入 .ko 將被植入相應的架構的模塊包中, 這將影響該架構的所有型號.\\n"

#: menu.sh:715
msgid ""
"This program will not determine the availability of imported modules or even "
"make type judgments, as please double check if it is correct.\\n"
msgstr ""
"該程式不會判斷導入的驅動模塊的可用性, 甚至不會做類型判斷, 因從請你再三確認是"
"否正確.\\n"

#: menu.sh:716
msgid ""
"If you want to remove it, please go to the \"Update Menu\" -> \"Update "
"modules\" to forcibly update the modules. All imports will be reset.\\n"
msgstr ""
"如果您想删除它, 請轉到 \"更新\"->\"更新模塊\" 強制更新模塊, 所有導入都將被重"
"置.\\n"

#: menu.sh:717
msgid "Do you want to continue?"
msgstr "是否繼續?"

#: menu.sh:722
msgid "Please upload the *.ko file."
msgstr "請上傳 *.ko 檔案."

#: menu.sh:738
msgid "Module '%s' added to %s-%s"
msgstr "模塊 '%s' 已添加到 %s-%s"

#: menu.sh:756
msgid "No i915 with dependencies module to deselect."
msgstr "沒有 i915 及其依賴模組取消選擇."

#: menu.sh:762
msgid "Module %s deselected.\\n"
msgstr "模組 %s 已取消選擇.\\n"

#: menu.sh:776 menu.sh:2058 menu.sh:2065 menu.sh:2088
msgid "Edit with caution"
msgstr "請謹慎編輯"

#: menu.sh:796
msgid "Add/Edit a cmdline item"
msgstr "添加/編輯 cmdline 參數"

#: menu.sh:797
msgid "Show/Delete cmdline items"
msgstr "顯示/删除 cmdline 參數"

#: menu.sh:799
msgid "Define SN/MAC"
msgstr "自定義 SN/MAC"

#: menu.sh:801
msgid "Show model inherent cmdline"
msgstr "顯示型號默認的 cmdline 參數"

#: menu.sh:803 menu.sh:822 menu.sh:831 menu.sh:855 menu.sh:863 menu.sh:880
#: menu.sh:891 menu.sh:923
msgid "Cmdline"
msgstr "Cmdline"

#: menu.sh:810
msgid "Commonly used cmdlines:\\n"
msgstr "常用 cmdlines:\\n"

#: menu.sh:811
msgid ""
" * \\Z4disable_mtrr_trim=\\Zn\\n    disables kernel trim any uncacheable "
"memory out.\\n"
msgstr " * \\Z4disable_mtrr_trim=\\Zn\\n    禁用內核修剪任何不可緩存的內存.\\n"

#: menu.sh:812
msgid ""
" * \\Z4intel_idle.max_cstate=1\\Zn\\n    Set the maximum C-state depth "
"allowed by the intel_idle driver.\\n"
msgstr ""
" * \\Z4intel_idle.max_cstate=1\\Zn\\n    設定 intel_idle 驅動程式允許使用的最"
"大 C-state 深度.\\n"

#: menu.sh:813
msgid ""
" * \\Z4pcie_port_pm=off\\Zn\\n    Turn off the power management of the PCIe "
"port.\\n"
msgstr " * \\Z4pcie_port_pm=off\\Zn\\n    關閉 PCIe 連接埠的電源管理.\\n"

#: menu.sh:814
msgid " * \\Z4libata.force=noncq\\Zn\\n    Disable NCQ for all SATA ports.\\n"
msgstr " * \\Z4libata.force=noncq\\Zn\\n    停用磁碟的 NCQ 功能.\\n"

#: menu.sh:815
msgid " * \\Z4SataPortMap=??\\Zn\\n    Sata Port Map.\\n"
msgstr " * \\Z4SataPortMap=??\\Zn\\n    Sata Port Map.\\n"

#: menu.sh:816
msgid ""
" * \\Z4DiskIdxMap=??\\Zn\\n    Disk Index Map, Modify disk name sequence.\\n"
msgstr " * \\Z4DiskIdxMap=??\\Zn\\n    Disk Index Map, 修改磁碟名稱順序.\\n"

#: menu.sh:817
msgid ""
" * \\Z4i915.enable_guc=2\\Zn\\n    Enable the GuC firmware on Intel graphics "
"hardware.(value: 1,2 or 3)\\n"
msgstr ""
" * \\Z4i915.enable_guc=2\\Zn\\n    啟用 Intel 核顯上的 GuC 韌體.(值: 1,2 or "
"3)\\n"

#: menu.sh:818
msgid ""
" * \\Z4i915.max_vfs=7\\Zn\\n     Set the maximum number of virtual functions "
"(VFs) that can be created for Intel graphics hardware.\\n"
msgstr ""
" * \\Z4i915.max_vfs=7\\Zn\\n     設定可建立虛擬核顯 (VFs) 的最大數量.\\n"

#: menu.sh:819 menu.sh:950
msgid "\\nEnter the parameter name and value you need to add.\\n"
msgstr "\\n輸入需要新增的參數名稱和值.\\n"

#: menu.sh:832 menu.sh:963
msgid "Invalid parameter name, retry?"
msgstr "無效的數名稱, 重試?"

#: menu.sh:856
msgid "No user cmdline to remove"
msgstr "沒有 cmdline 參數被删除"

#: menu.sh:864
msgid "Select cmdline to remove"
msgstr "選擇要删除的參數"

#: menu.sh:875
msgid "Note: (MAC will not be set to NIC, Only for activation services.)"
msgstr "注意: (MAC 不會設定到 NIC，僅用於啟動服務.)"

#: menu.sh:881
msgid "Random"
msgstr "隨機"

#: menu.sh:892
msgid "Invalid SN/MAC, retry?"
msgstr "無效的 SN/MAC, 重試?"

#: menu.sh:935
msgid "Add/edit a synoinfo item"
msgstr "添加/編輯 Synoinfo 參數"

#: menu.sh:936
msgid "Show/Delete synoinfo items"
msgstr "顯示/删除 Synoinfo 參數"

#: menu.sh:938 menu.sh:953 menu.sh:962 menu.sh:987 menu.sh:995
msgid "Synoinfo"
msgstr "Synoinfo"

#: menu.sh:945
msgid "Commonly used synoinfo:\\n"
msgstr "常用 synoinfo:\\n"

#: menu.sh:946
msgid " * \\Z4maxdisks=??\\Zn\\n    Maximum number of disks supported.\\n"
msgstr " * \\Z4maxdisks=??\\Zn\\n    最大硬碟數.\\n"

#: menu.sh:947
msgid " * \\Z4internalportcfg=0x????\\Zn\\n    Internal(sata) disks mask.\\n"
msgstr " * \\Z4internalportcfg=0x????\\Zn\\n    Internal(sata) 磁碟遮罩.\\n"

#: menu.sh:948
msgid " * \\Z4esataportcfg=0x????\\Zn\\n    Esata disks mask.\\n"
msgstr " * \\Z4esataportcfg=0x????\\Zn\\n    Esata 磁碟遮罩.\\n"

#: menu.sh:949
msgid " * \\Z4usbportcfg=0x????\\Zn\\n    USB disks mask.\\n"
msgstr " * \\Z4usbportcfg=0x????\\Zn\\n    USB 磁碟遮罩.\\n"

#: menu.sh:988
msgid "No synoinfo entries to remove"
msgstr "沒有 Synoinfo 參數被删除"

#: menu.sh:996
msgid "Select synoinfo entry to remove"
msgstr "選擇要删除的參數"

#: menu.sh:1026
msgid "Downloading old pat to extract synology .pat extractor..."
msgstr "下載舊 pat, 選取 .pat 解密程式中..."

#: menu.sh:1032 menu.sh:1166
msgid "Check internet or cache disk space.\\nError: %d:%d"
msgstr "請檢查網際網路或磁碟空間.\\n錯誤: %d:%d"

#: menu.sh:1071
msgid "Uncompressed tar"
msgstr "未壓縮 tar"

#: menu.sh:1075
msgid "Compressed tar"
msgstr "已壓縮 tar"

#: menu.sh:1079
msgid "Encrypted"
msgstr "已加密"

#: menu.sh:1083
msgid ""
"Could not determine if pat file is encrypted or not, maybe corrupted, try "
"again!"
msgstr "無法確定 pat 檔案是否加密, 可能已損壞, 請重試!"

#: menu.sh:1090 menu.sh:1182
msgid "Disassembling %s: "
msgstr "解壓縮 %s: "

#: menu.sh:1097
msgid "Extractor cached."
msgstr "已存在解密程式."

#: menu.sh:1103 menu.sh:1106
msgid "Extracting ..."
msgstr "解壓中 ..."

#: menu.sh:1139
msgid "%s cached."
msgstr "%s 已緩存."

#: menu.sh:1143
msgid "Cleaning cache ..."
msgstr "清除緩存 ..."

#: menu.sh:1152
msgid ""
"Based on the current network situation, switch to %s mirror to downloading."
msgstr "根據當前的網絡狀況, 已切換到 %s 鏡像伺服器進行下載."

#: menu.sh:1155
msgid "Downloading %s ..."
msgstr "下載 %s 中 ..."

#: menu.sh:1172
msgid "Checking hash of %s: "
msgstr "檢查 %s 的 hash: "

#: menu.sh:1175
msgid ""
"md5 hash of pat not match, Please reget pat data from the version menu and "
"try again!"
msgstr "pat 的 md5 Hash 不匹配, 請在版本選單中重新獲取 pat 數據後重試!"

#: menu.sh:1178 menu.sh:1194 menu.sh:1204
msgid "OK"
msgstr "OK"

#: menu.sh:1189
msgid "Setting hash: "
msgstr "設定 hash: "

#: menu.sh:1196
msgid "Copying files: "
msgstr "拷貝檔案: "

#: menu.sh:1220
msgid "Addon %s not found!"
msgstr "挿件 %s 未找到!"

#: menu.sh:1246
msgid "Cleaning ..."
msgstr "清除中 ..."

#: menu.sh:1248
msgid "Ready!"
msgstr "已就绪!"

#: menu.sh:1273
msgid "Switch LKM version:"
msgstr "選擇 LKM 版本:"

#: menu.sh:1274
msgid "HDD sort(hotplug):"
msgstr "HDD 排序(hotplug):"

#: menu.sh:1277
msgid "Switch direct boot:"
msgstr "切換直接啟動:"

#: menu.sh:1279
msgid "Timeout of get ip in boot:"
msgstr "啟動時取得 IP 的超時時間:"

#: menu.sh:1280
msgid "Timeout of boot wait:"
msgstr "啟動超時時間:"

#: menu.sh:1281
msgid "kernel switching method:"
msgstr "內核切換的管道:"

#: menu.sh:1283
msgid "Reboot on kernel panic:"
msgstr "內核恐慌時重新啟動:"

#: menu.sh:1285
msgid "Set static IP"
msgstr "設定靜態 IP"

#: menu.sh:1286
msgid "Set wireless account"
msgstr "設定無線帳號"

#: menu.sh:1287
msgid "Edit user config file manually"
msgstr "編輯用戶設定檔"

#: menu.sh:1288
msgid "Edit grub.cfg file manually"
msgstr "編輯 grub.cfg"

#: menu.sh:1289
msgid "Try to recovery a DSM installed system"
msgstr "嘗試恢復已安裝 DSM 的系統"

#: menu.sh:1290
msgid "Show disks information"
msgstr "顯示磁片資訊"

#: menu.sh:1292
msgid "show/modify the current pat data"
msgstr "顯示/修改當前 pat 下載連結"

#: menu.sh:1294
msgid "Allow downgrade installation"
msgstr "允許降級安裝"

#: menu.sh:1295
msgid "Format disk(s) # Without loader disk"
msgstr "格式化磁碟(s) # 不含開機磁碟"

#: menu.sh:1296
msgid "Reset DSM system password"
msgstr "重置 DSM 系統密碼"

#: menu.sh:1297
msgid "Force enable telnet of DSM system"
msgstr "強制開啟 DSM 的 telnet"

#: menu.sh:1298
msgid "Save modifications of '/opt/rr'"
msgstr "保存'/opt/rr'的修改"

#: menu.sh:1300
msgid "Custom dts file # Need rebuild"
msgstr "自定義dts檔案 # 需要重新編譯"

#: menu.sh:1302
msgid "Custom patch script # Developer"
msgstr "自定義補丁腳本 # 開發"

#: menu.sh:1304
msgid "Use EMMC as the system disk:"
msgstr "使用EMMC作為系統磁片:"

#: menu.sh:1306
msgid "Clone bootloader disk to another disk"
msgstr "克隆引導盤到另一個磁碟"

#: menu.sh:1307
msgid "Report bugs to the author"
msgstr "向作者报告错误"

#: menu.sh:1308
msgid "Install development tools"
msgstr "安裝開發者工具"

#: menu.sh:1309
msgid "Show QR logo:"
msgstr "顯示 QR logo:"

#: menu.sh:1310
msgid "Set global proxy"
msgstr "設定全域代理"

#: menu.sh:1311
msgid "Set github proxy"
msgstr "設定 GitHub 代理"

#: menu.sh:1312
msgid "Vigorously miracle"
msgstr "大力出奇蹟"

#: menu.sh:1315 menu.sh:1339 menu.sh:1351 menu.sh:1371 menu.sh:1394
#: menu.sh:1418 menu.sh:1423 menu.sh:1435 menu.sh:1444 menu.sh:1466
#: menu.sh:1567 menu.sh:1574 menu.sh:1592 menu.sh:1605 menu.sh:1608
#: menu.sh:1621 menu.sh:1625 menu.sh:1626 menu.sh:1631 menu.sh:1635
#: menu.sh:1650 menu.sh:1652 menu.sh:1675 menu.sh:1679 menu.sh:1686
#: menu.sh:1692 menu.sh:1710 menu.sh:1712 menu.sh:1716 menu.sh:1730
#: menu.sh:1732 menu.sh:1736 menu.sh:1739 menu.sh:1754 menu.sh:1762
#: menu.sh:1766 menu.sh:1781 menu.sh:1786 menu.sh:1797 menu.sh:1829
#: menu.sh:1833 menu.sh:1839 menu.sh:1845 menu.sh:1851 menu.sh:1882
#: menu.sh:1895 menu.sh:1899 menu.sh:1909 menu.sh:1914 menu.sh:1921
#: menu.sh:1923 menu.sh:1935 menu.sh:1946 menu.sh:1968 menu.sh:1979
#: menu.sh:1996
msgid "Advanced"
msgstr "高級"

#: menu.sh:1316
msgid "Advanced option"
msgstr "高級設定"

#: menu.sh:1340 menu.sh:1352 menu.sh:1372
msgid "Choose a time(seconds)"
msgstr "選擇一個時間(秒)"

#: menu.sh:1382
msgid "Temporary IP: (UI will not refresh)"
msgstr "臨時 IP: (UI 不會重繪)"

#: menu.sh:1419
msgid "Setting IP ..."
msgstr "設定 IP..."

#: menu.sh:1424
msgid "Scanning ..."
msgstr "掃描中 ..."

#: menu.sh:1427
msgid "Scanned SSIDs:\\n"
msgstr "掃描的 SSID:\\n"

#: menu.sh:1445
msgid "Invalid SSID/PSK, retry?"
msgstr "無效的 SSID/PSK, 重試?"

#: menu.sh:1467
msgid "Setting ..."
msgstr "設定中 ..."

#: menu.sh:1565
msgid "\\nTotal of ports: %s\\n"
msgstr "\\n埠總數: %s\\n"

#: menu.sh:1566
msgid ""
"\\nPorts with color \\Z1red\\Zn as DUMMY, color \\Z2\\Zbgreen\\Zn has drive "
"connected."
msgstr "\\n\\Z1红色\\Zn 為類比埠, \\Z2\\Zb绿色\\Zn 為已驅動的物理埠."

#: menu.sh:1573
msgid "pat: (editable)"
msgstr "pat: (可編輯)"

#: menu.sh:1589
msgid ""
"This feature will allow you to downgrade the installation by removing the "
"VERSION file from the first partition of all disks.\\n"
msgstr "此功能通過删除所有磁碟的第一個分區的 VERSION 檔案來允許你降級安裝.\\n"

#: menu.sh:1590
msgid "Therefore, please insert all disks before continuing.\\n"
msgstr "囙此, 請插入所有磁碟後再進行操作.\\n"

#: menu.sh:1591 menu.sh:1632
msgid ""
"Warning:\\nThis operation is irreversible. Please backup important data. Do "
"you want to continue?"
msgstr "警告:\\n該操作不可逆, 請提前備份重要數據. 是否繼續?"

#: menu.sh:1606
msgid "Removing ..."
msgstr "删除中..."

#: menu.sh:1607
msgid "Remove VERSION file for all disks completed."
msgstr "已移除所有磁碟的 VERSION 檔案."

#: menu.sh:1622 menu.sh:1830
msgid "No disk found!"
msgstr "未找到磁碟!"

#: menu.sh:1636
msgid ""
"Warning:\\nThe current hds is in raid, do you still want to format them?"
msgstr "警告:\\n當前的硬碟處於 raid 中, 是否仍要格式化?"

#: menu.sh:1651
msgid "Formatting ..."
msgstr "格式化中..."

#: menu.sh:1653
msgid "Formatting is complete."
msgstr "格式化完成."

#: menu.sh:1676
msgid "The installed Syno system not found in the currently inserted disks!"
msgstr "未在當前插入的硬碟中找到已安裝的 syno 系統!"

#: menu.sh:1680
msgid "Choose a user name"
msgstr "選擇一個用戶"

#: menu.sh:1687
msgid "Type a new password for user '%s'"
msgstr "輸入用戶 '%s' 的新密碼"

#: menu.sh:1693
msgid "Invalid password"
msgstr "無效密碼"

#: menu.sh:1711
msgid "Resetting ..."
msgstr "重置中 ..."

#: menu.sh:1713
msgid "Password reset completed."
msgstr "重置密碼完成."

#: menu.sh:1717
msgid "Please insert all disks before continuing.\\n"
msgstr "請插入所有磁碟後再進行操作.\\n"

#: menu.sh:1731
msgid "Enabling ..."
msgstr "開啟中 ..."

#: menu.sh:1733
msgid "Telnet is enabled."
msgstr "Telnet 已開啟."

#: menu.sh:1737
msgid ""
"Warning:\\nDo not terminate midway, otherwise it may cause damage to the RR. "
"Do you want to continue?"
msgstr "警告:\\n請不要中途停止, 否則將導致 RR 引導損毀, 是否繼續?"

#: menu.sh:1740
msgid ""
"Saving ...\\n(It usually takes 5-10 minutes, please be patient and wait.)"
msgstr "保存中...\\n(一般需要5~10分鐘，請耐心等待.)"

#: menu.sh:1755
msgid "Save is complete."
msgstr "保存完成."

#: menu.sh:1761
msgid ""
"Or upload the dts file to %s via DUFS, Will be automatically imported when "
"building."
msgstr "或透過 DUFS 上傳 dts 檔案到 %s，編譯時會自動匯入。"

#: menu.sh:1767
msgid ""
"Currently, only dts format files are supported. Please prepare and click to "
"confirm uploading.\\n(saved in /mnt/p3/users/)"
msgstr ""
"現時, 只支持 dts 格式的檔案, 請準備並點擊確認上傳.\\n(保存於 /mnt/p3/users/ "
"中)"

#: menu.sh:1782
msgid "Not a valid dts file, please try again!"
msgstr "dts 檔案無效, 請重試!"

#: menu.sh:1787
msgid "A valid dts file, Automatically import at compile time."
msgstr "dts 檔案有效, 將在編譯時自動導入."

#: menu.sh:1793
msgid "This option is only informative.\\n\\n"
msgstr "此選項僅為提示. \\n\\n"

#: menu.sh:1794
msgid "This program reserves an interface for ramdisk custom patch scripts.\\n"
msgstr "此程式為 ramdisk 自定義補丁腳本保留了一個介面. \\n"

#: menu.sh:1795
msgid "Call timing: called before ramdisk packaging.\\n"
msgstr "調用時機：在 ramdisk 打包前調用. \\n"

#: menu.sh:1796
msgid "Location: /mnt/p3/scripts/*.sh\\n"
msgstr "位置：/mnt/p3/scripts/*.sh\\n"

#: menu.sh:1834
msgid "Choose a disk to clone to"
msgstr "選擇要克隆到的磁碟"

#: menu.sh:1840
msgid "No disk selected!"
msgstr "未選擇磁碟!"

#: menu.sh:1846
msgid "Disk %s size is less than 1GB and cannot be cloned!"
msgstr "磁碟 %s 的大小小於 1GB，無法克隆!"

#: menu.sh:1850
msgid ""
"Warning:\\nDisk %s will be formatted and written to the bootloader. Please "
"confirm that important data has been backed up. \\nDo you want to continue?"
msgstr ""
"警告:\\n磁碟 %s 將被格式化並寫入引導程式. 請確認重要資料已備份. \\n是否繼續?"

#: menu.sh:1883
msgid "Cloning ..."
msgstr "克隆中 ..."

#: menu.sh:1885
msgid ""
"Bootloader has been cloned to disk %s, please remove the current bootloader "
"disk!\\nReboot?"
msgstr "引導程式已克隆到磁碟 %s, 請移除目前引導磁碟! \\n重新啟動？"

#: menu.sh:1896
msgid ""
"Please via %s to download the logs,\\nAnd go to github to create an issue "
"and upload the logs."
msgstr "請透過 %s 下載日誌 logs,\\n並前往 github 建立問題並上傳日誌 logs."

#: menu.sh:1900
msgid "Please go to github to create an issue and upload the logs."
msgstr "請前往 github 建立問題並上傳日誌 logs."

#: menu.sh:1904
msgid "\\Z1No logs found!\\Zn\\n\\n"
msgstr "\\Z1日誌 logs 找不到!\\Zn\\n\\n"

#: menu.sh:1905
msgid "Please do as follows:\\n"
msgstr "請按如下操作:\\n"

#: menu.sh:1906
msgid " 1. Add dbgutils in addons and rebuild.\\n"
msgstr "1. 在外掛程式中加入 dbgutils 並重新編譯.\\n"

#: menu.sh:1907
msgid " 2. Wait 10 minutes after booting.\\n"
msgstr "2. 啟動後等待10分鐘.\\n"

#: menu.sh:1908
msgid " 3. Reboot into RR and go to this option.\\n"
msgstr "3. 重啟到 RR 並回到該選項.\\n"

#: menu.sh:1915
msgid ""
"This option only installs opkg package management, allowing you to install "
"more tools for use and debugging. Do you want to continue?"
msgstr ""
"該選項僅安裝 opkg 包管理工具, 使你能够安裝更多的工具以供使用和調試, 是否繼續?"

#: menu.sh:1922
msgid "opkg installing ..."
msgstr "opkg 安裝中 ..."

#: menu.sh:1924
msgid ""
"opkg install is complete. Please reconnect to ssh/web, or execute 'source ~/."
"bashrc'"
msgstr "opkg 安裝完成. 請重新連結 ssh/web, 或者執行 'source ~/.bashrc'"

#: menu.sh:1936
msgid "Please enter a proxy server url.(e.g., http://192.168.1.1:7981/)"
msgstr "請輸入代理伺服器 url.(e.g., http://192.168.1.1:7981/)"

#: menu.sh:1947 menu.sh:1980
msgid "Invalid proxy server url, continue?"
msgstr "無效的代理伺服器 url, 是否繼續?"

#: menu.sh:1969
msgid "Please enter a proxy server url.(e.g., https://mirror.ghproxy.com/)"
msgstr "請輸入代理伺服器 url.(e.g., https://mirror.ghproxy.com/)"

#: menu.sh:1994
msgid "It is expected that all restrictions on DSM will be lifted,\\n"
msgstr "預計将解除DSM一切限制,\\n"

#: menu.sh:1995
msgid ""
"But since upgrading is not supported, I don not want to implement it for the "
"time being.\\n"
msgstr "但由於不支援升級, 暫時不想實現.\\n"

#: menu.sh:2007 menu.sh:2042 menu.sh:2049
msgid "Try recovery DSM"
msgstr "嘗試恢復 DSM 系統"

#: menu.sh:2008
msgid "Trying to recovery a DSM installed system ..."
msgstr "嘗試恢復已安裝的 DSM 系統中 ..."

#: menu.sh:2036
msgid "Found a installation:\\nModel: %s\\nProductversion: %s"
msgstr "找到已安裝:\\n型號:  %s\\n版本: %s"

#: menu.sh:2040
msgid "\\nSerial: %s"
msgstr "\\nSN: %s"

#: menu.sh:2050
msgid "Unfortunately I couldn't mount the DSM partition!"
msgstr "很遺憾, 我無法掛載 DSM 分區!"

#: menu.sh:2100
msgid "Alert"
msgstr "警告"

#: menu.sh:2101
msgid "Config changed, would you like to rebuild the loader?"
msgstr "配寘已更改, 是否重新編譯引導?"

#: menu.sh:2118 menu.sh:2500
msgid "Choose a language"
msgstr "選擇語言"

#: menu.sh:2133
msgid "Choose a layout"
msgstr "選擇佈局"

#: menu.sh:2145
msgid "Choice a keymap"
msgstr "選擇鍵盤"

#: menu.sh:2164 menu.sh:2217 menu.sh:2268 menu.sh:2335 menu.sh:2340
#: menu.sh:2345 menu.sh:2350 menu.sh:2357 menu.sh:2365 menu.sh:2373
#: menu.sh:2381
msgid "Update %s"
msgstr "更新 %s"

#: menu.sh:2167
msgid "Checking last version ..."
msgstr "檢測新版本中 ..."

#: menu.sh:2178 menu.sh:2181
msgid "Error checking new version.\\nError: TAG is %s"
msgstr "檢測新版本錯誤.\\nError: TAG is %s"

#: menu.sh:2188
msgid "No new version."
msgstr "沒有新版本."

#: menu.sh:2192
msgid "No new version. Actual version is %s\\nForce update?"
msgstr "沒有新版本. 實際版本為 %s\\n強制更新?"

#: menu.sh:2201
msgid "Downloading ..."
msgstr "下載中 ..."

#: menu.sh:2205 menu.sh:2208
msgid "Error downloading new version.\\nError: %d:%d"
msgstr "下載新版本錯誤.\\nError: %d:%d"

#: menu.sh:2219 menu.sh:2270
msgid "Extracting last version"
msgstr "解壓新版本"

#: menu.sh:2223
msgid "Error extracting update file"
msgstr "更新檔案解壓錯誤"

#: menu.sh:2230
msgid "Checksum do not match!"
msgstr "Checksum 不匹配!"

#: menu.sh:2239
msgid ""
"The current version does not support upgrading to the latest update.zip. "
"Please remake the bootloader disk!"
msgstr "當前版本不支持最新的 update.zip 陞級, 請重新製作引導盤!"

#: menu.sh:2244
msgid "Installing new files ..."
msgstr "安裝更新中 ..."

#: menu.sh:2261
msgid "RR updated with success to %s!\\nReboot?"
msgstr "RR 更新成功 %s!\\n重啓?"

#: menu.sh:2276
msgid "Installing new %s ..."
msgstr "安裝新 %s 中 ..."

#: menu.sh:2305 menu.sh:2308
msgid "%s updated with success!"
msgstr "%s 更新成功!"

#: menu.sh:2320
msgid "Update all"
msgstr "更新全部"

#: menu.sh:2321
msgid "Update RR"
msgstr "更新 RR"

#: menu.sh:2322
msgid "Update addons"
msgstr "更新挿件"

#: menu.sh:2323
msgid "Update modules"
msgstr "更新模塊"

#: menu.sh:2324
msgid "Update LKMs"
msgstr "更新LKMs"

#: menu.sh:2325
msgid "Local upload"
msgstr "本地上傳"

#: menu.sh:2326
msgid "Pre Release:"
msgstr "預發佈:"

#: menu.sh:2330
msgid ""
"Manually uploading update.zip,addons.zip,modules.zip,rp-lkms.zip to /tmp/ "
"will skip the download."
msgstr ""
"手動上傳 update.zip,addons.zip,modules.zip,rp-lkms.zip 到 /tmp/ 將跳過下載."

#: menu.sh:2335 menu.sh:2365
msgid "addons"
msgstr "挿件"

#: menu.sh:2340 menu.sh:2373
msgid "modules"
msgstr "模塊"

#: menu.sh:2345 menu.sh:2381
msgid "LKMs"
msgstr "LKMs"

#: menu.sh:2350 menu.sh:2357
msgid "RR"
msgstr "RR"

#: menu.sh:2392
msgid ""
"Or upload update.zip, addons.zip, modules.zip, rp-lkms.zip to /tmp/ via DUFS "
"will skip the download.\\n"
msgstr ""
"或透過 DUFS 上傳 update.zip,addons.zip,modules.zip,rp-lkms.zip 到 /tmp/ 將跳"
"過下載。\\n"

#: menu.sh:2398
msgid ""
"Please keep the attachment name consistent with the attachment name on "
"Github.\\n"
msgstr "請保持附件名稱與 github 上附件名稱一致.\\n"

#: menu.sh:2399
msgid "Upload update*.zip will update RR.\\n"
msgstr "上傳 update*.zip 将更新 RR.\\n"

#: menu.sh:2400
msgid "Upload addons*.zip will update Addons.\\n"
msgstr "上傳 addons*.zip 将更新 挿件.\\n"

#: menu.sh:2401
msgid "Upload modules*.zip will update Modules.\\n"
msgstr "上傳 modules*.zip 将更新 模塊.\\n"

#: menu.sh:2402
msgid "Upload rp-lkms*.zip will update LKMs.\\n"
msgstr "上傳 rp-lkms*.zip 将更新 LKMs.\\n"

#: menu.sh:2457
msgid "This person is very lazy and hasn't written anything."
msgstr "這個人很懶, 什麼也沒有寫."

#: menu.sh:2480
msgid "Choose a model"
msgstr "選擇型號"

#: menu.sh:2482
msgid "Choose a version"
msgstr "選擇版本"

#: menu.sh:2484
msgid "Parse pat"
msgstr "解析 pat"

#: menu.sh:2486
msgid "Addons menu"
msgstr "挿件"

#: menu.sh:2487
msgid "Modules menu"
msgstr "模塊"

#: menu.sh:2488
msgid "Cmdline menu"
msgstr "設定 Cmdline"

#: menu.sh:2489
msgid "Synoinfo menu"
msgstr "設定 Synoinfo"

#: menu.sh:2491
msgid "Advanced menu"
msgstr "高級設定"

#: menu.sh:2494
msgid "Build the loader"
msgstr "編譯引導"

#: menu.sh:2498
msgid "Boot the loader"
msgstr "啟動"

#: menu.sh:2501
msgid "Choose a keymap"
msgstr "選擇鍵盤"

#: menu.sh:2503
msgid "Clean disk cache"
msgstr "清除磁碟緩存"

#: menu.sh:2505
msgid "Update menu"
msgstr "更新"

#: menu.sh:2506
msgid "Notepad"
msgstr "備註"

#: menu.sh:2578
msgid "Choose a action"
msgstr "選擇動作"

#: menu.sh:2579
msgid "Poweroff"
msgstr "關機"

#: menu.sh:2580
msgid "Reboot"
msgstr "重啓"

#: menu.sh:2581
msgid "Reboot to RR"
msgstr "重啓到 RR"

#: menu.sh:2582
msgid "Back to shell"
msgstr "退出到 shell"

#: menu.sh:2608
msgid "Call \\033[1;32mmenu.sh\\033[0m to return to menu"
msgstr "執行 \\033[1;32mmenu.sh\\033[0m 重新進入設定選單"