RROrg-rr/files/initrd/opt/rr/lang/zh_CN.po

# Chinese translations for RR package.
# Copyright (C) 2023 THE RR'S COPYRIGHT HOLDER
# This file is distributed under the same license as the RR package.
# ing <ing@ing-pc.>, 2023.
#
msgid ""
msgstr ""
"Project-Id-Version: RR\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2024-01-03 21:38+0800\n"
"PO-Revision-Date: 2024-01-03 21:45+0800\n"
"Last-Translator: ing <ing@ing-pc.>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 3.4.2\n"

#: boot.sh:8 init.sh:9 menu.sh:9
msgid "Loader is not init!"
msgstr "引导未初始化!"

#: boot.sh:10 init.sh:107
msgid "Loader is not configured!"
msgstr "引导未配置!"

#: boot.sh:20 init.sh:14
msgid "Welcome to %s"
msgstr "Welcome to %s"

#: boot.sh:33
msgid "DSM zImage changed"
msgstr "DSM zImage 已更改"

#: boot.sh:36 menu.sh:1180
msgid "zImage not patched,\\nPlease upgrade the bootloader version and try again.\\nPatch error:\\n"
msgstr "zImage 打补丁失败,\\n请升级引导版本并重试.\\nPatch 错误:\\n"

#: boot.sh:45
msgid "DSM Ramdisk changed"
msgstr "DSM Ramdisk 已更改"

#: boot.sh:48 menu.sh:1186
msgid "Ramdisk not patched,\\nPlease upgrade the bootloader version and try again.\\nPatch error:\\n"
msgstr "Ramdisk 打补丁失败,\\n请升级引导版本并重试.\\nPatch 错误:\\n"

#: boot.sh:67
msgid "Model:"
msgstr "型号: "

#: boot.sh:68
msgid "Build:"
msgstr "版本: "

#: boot.sh:69
msgid "LKM:  "
msgstr "LKM:  "

#: boot.sh:70
msgid "DMI:  "
msgstr "DMI:  "

#: boot.sh:71
msgid "CPU:  "
msgstr "CPU:  "

#: boot.sh:72
msgid "MEM:  "
msgstr "MEM:  "

#: boot.sh:75
msgid "The current version of bootloader does not support booting %s-%s, please upgrade and rebuild."
msgstr "当前版本的引导盘不支持引导 %s-%s, 请升级并重新编译."

#: boot.sh:87
msgid "Please insert at least one sata/scsi disk for system installation, except for the bootloader disk."
msgstr "除引导盘外, 请至少插入一块 sata/scsi 磁盘进行系统安装."

#: boot.sh:154
msgid "Cmdline:\\n"
msgstr "Cmdline:\\n"

#: boot.sh:160
msgid "Reboot to boot directly in DSM"
msgstr "重启并直接进入 DSM 引导"

#: boot.sh:166 init.sh:120
msgid "Detected %s network cards."
msgstr "检测到 %s 个网卡."

#: boot.sh:167 init.sh:121
msgid "Checking Connect."
msgstr "检查连接."

#: boot.sh:187
msgid "Waiting IP.(For reference only)"
msgstr "获取 IP.(仅供参考)"

#: boot.sh:194 init.sh:146
msgid "DOWN"
msgstr "关闭"

#: boot.sh:198 init.sh:150
msgid "NOT CONNECTED"
msgstr "未连接"

#: boot.sh:202 init.sh:154
msgid "TIMEOUT (Please check the IP on the router.)"
msgstr "超时 (请检查路由器上的IP.)"

#: boot.sh:208
msgid "Access \\033[1;34mhttp://%s:5000\\033[0m to connect the DSM via web."
msgstr "在浏览器中访问 \\033[1;34mhttp://%s:5000\\033[0m 链接 DSM."

#: boot.sh:220
msgid "%2ds (Changing access(ssh/web) status will interrupt boot)"
msgstr "%2ds ((ssh/web)连接状态改变将中断启动)"

#: boot.sh:224
msgid "access(ssh/web) status has changed and booting is interrupted."
msgstr "(ssh/web)连接状态已改变, 启动被中断."

#: boot.sh:234
msgid "Loading DSM kernel ..."
msgstr "加载 DSM 内核 ..."

#: boot.sh:247
msgid "Warning, running kexec with --noefi param, strange things will happen!!"
msgstr "警告, 使用'--noefi'参数运行'kexec', 可能有不好的事情发生!!"

#: boot.sh:252
msgid "Booting ..."
msgstr "引导中 ..."

#: boot.sh:254
msgid "[This interface will not be operational. Please wait a few minutes.\\nFind DSM via http://find.synology.com/ or Synology Assistant and connect.]"
msgstr "[该界面已不可操作. 请在数分钟后\\n通过 http://find.synology.com/ 或者 Synology Assistant 查找 DSM 并访问.]"

#: init.sh:23
msgid "Network devices not found!"
msgstr "未找到网卡!"

#: init.sh:84
msgid "Loader disk neither USB or SATA/SCSI/NVME/MMC DoM"
msgstr "引导磁盘仅支持 USB 或者 SATA/SCSI/NVME/MMC DoM"

#: init.sh:92
msgid "Loader disk:"
msgstr "引导盘:"

#: init.sh:100
msgid "Loading keymap"
msgstr "加载键盘映射"

#: init.sh:110
msgid "User requested edit settings."
msgstr "用户触发编辑设置."

#: init.sh:139
msgid "Waiting IP."
msgstr "获取 IP."

#: init.sh:160
msgid "Access \\033[1;34mhttp://%s:7681\\033[0m to configure the loader via web terminal."
msgstr "在浏览器中访问 \\033[1;34mhttp://%s:7681\\033[0m 进入 WEB 终端进行配置."

#: init.sh:170
msgid "Call \\033[1;32mmenu.sh\\033[0m to configure loader"
msgstr "执行 \\033[1;32mmenu.sh\\033[0m 进入设置菜单"

#: init.sh:172
msgid "User config is on"
msgstr "用户配置文件位于"

#: init.sh:173
msgid "TTYD: \\033[1;34mhttp://rr:7681/\\033[0m"
msgstr "TTYD: \\033[1;34mhttp://rr:7681/\\033[0m"

#: init.sh:174
msgid "DUFS: \\033[1;34mhttp://rr:7304/\\033[0m"
msgstr "DUFS: \\033[1;34mhttp://rr:7304/\\033[0m"

#: init.sh:175
msgid "TTYD&DUFS: \\033[1;34mhttp://rr:80/\\033[0m"
msgstr "TTYD&DUFS: \\033[1;34mhttp://rr:80/\\033[0m"

#: init.sh:177
msgid "Default SSH Root password is"
msgstr "默认 SSH 的 root 密码为"

#: init.sh:191
msgid "You have less than 4GB of RAM, if errors occur in loader creation, please increase the amount of memory."
msgstr "您的 RAM 不足 4GB, 如果在创建引导时出现错误, 请增加内存."

#: menu.sh:100 menu.sh:134 menu.sh:177
msgid "Model"
msgstr "型号"

#: menu.sh:101
msgid "Reading models"
msgstr "读取型号"

#: menu.sh:111
msgid "Compatibility judgment"
msgstr "兼容性判断"

#: menu.sh:132
msgid "Disable flags restriction"
msgstr "禁用标志限制"

#: menu.sh:133
msgid "Show all models"
msgstr "显示所有型号"

#: menu.sh:135
msgid "Choose the model"
msgstr "选择型号"

#: menu.sh:227 menu.sh:238 menu.sh:244 menu.sh:255 menu.sh:281 menu.sh:301 menu.sh:351
msgid "Product Version"
msgstr "版本"

#: menu.sh:228
msgid "Choose a product version"
msgstr "选择版本"

#: menu.sh:239
msgid "The current version has been set to %s. Do you want to reset the version?"
msgstr "当前版本已设置为 %s. 是否要重置版本?"

#: menu.sh:245
msgid "This version does not support UEFI startup, Please select another version or switch the startup mode."
msgstr "该版本不支持 UEFI 启动, 请选择其他版本或者切换启动模式."

#: menu.sh:256
msgid "Get pat data ..."
msgstr "获取 pat 数据 ..."

#: menu.sh:275
msgid "Failed to get pat data,\\nPlease manually fill in the URL and md5sum of the corresponding version of pat."
msgstr "获取 pat 数据失败,\\n请手动填写相应版本 pat 的 URL 和 MD5."

#: menu.sh:279
msgid "Successfully to get pat data,\\nPlease confirm or modify as needed."
msgstr "获取 pat 数据成功,\\n请确认或者按需修改."

#: menu.sh:282
msgid "Retry"
msgstr "重试"

#: menu.sh:302 menu.sh:393
msgid "Reconfiguring Synoinfo, Addons and Modules"
msgstr "重新配置 Syninfo, 插件和模块"

#: menu.sh:336
msgid "You have selected the %s and %s.\\n'Parse Pat' will overwrite the previous selection.\\nDo you want to continue?"
msgstr "你已经选择了 %s 和 %s.\\n‘解析 Pat' 将覆盖之前的选择.\\n是否继续?"

#: menu.sh:337
msgid "Parse Pat"
msgstr "解析 Pat"

#: menu.sh:345
msgid "No pat file found in users folder!\\n"
msgstr "在用户文件夹中找不到 pat 文件!\\n"

#: menu.sh:346
msgid "Please upload the pat file to /mnt/p3/users/ folder via DUFS and re-enter this option.\\n"
msgstr "请通过 DUFS 将 pat 文件上传到 /mnt/p3/users/ 文件夹，然后重新输入此选项.\\n"

#: menu.sh:347 menu.sh:357 menu.sh:2254 menu.sh:2315 menu.sh:2325 menu.sh:2342 menu.sh:2362
msgid "Update"
msgstr "更新"

#: menu.sh:352
msgid "Choose a pat file"
msgstr "选择一个 pat 文件"

#: menu.sh:358 menu.sh:370 menu.sh:1062
msgid "pat Invalid, try again!"
msgstr "无效的 pat, 请重试!"

#: menu.sh:363
msgid "Parse %s ..."
msgstr "解析 %s ..."

#: menu.sh:379
msgid "Currently, %s is not supported."
msgstr "目前，不支持 %s."

#: menu.sh:389
msgid "Currently, %s of %s is not supported."
msgstr "目前，不支持 %s-%s."

#: menu.sh:450 menu.sh:1196 menu.sh:2430
msgid "Main menu"
msgstr "主菜单"

#: menu.sh:451 menu.sh:1197
msgid "Making ..."
msgstr "编译中 ..."

#: menu.sh:453 menu.sh:1199
msgid "Error"
msgstr "错误"

#: menu.sh:486 menu.sh:503 menu.sh:508 menu.sh:514 menu.sh:525 menu.sh:533 menu.sh:556 menu.sh:561 menu.sh:565 menu.sh:579 menu.sh:583 menu.sh:591 menu.sh:594
msgid "Addons"
msgstr "插件"

#: menu.sh:487 menu.sh:614 menu.sh:750 menu.sh:883 menu.sh:2431
msgid "Choose a option"
msgstr "选择一个选项"

#: menu.sh:488
msgid "Add an addon"
msgstr "添加插件"

#: menu.sh:489
msgid "Delete addons"
msgstr "删除插件"

#: menu.sh:490
msgid "Show all addons"
msgstr "显示所有插件"

#: menu.sh:491
msgid "Upload a external addon"
msgstr "上传外部插件"

#: menu.sh:492 menu.sh:619 menu.sh:748 menu.sh:881 menu.sh:1256 menu.sh:2252 menu.sh:2428 menu.sh:2504
msgid "Exit"
msgstr "退出"

#: menu.sh:504
msgid "No available addons to add"
msgstr "没有可用的插件可添加"

#: menu.sh:509
msgid "Select an addon"
msgstr "选择插件"

#: menu.sh:515
msgid "Type a optional params to addon"
msgstr "输入插件的加载参数"

#: menu.sh:526
msgid "No user addons to remove"
msgstr "没有要删除的用户插件"

#: menu.sh:534
msgid "Select addon to remove"
msgstr "选择要删除的插件"

#: menu.sh:547
msgid "Name with color \"\\Z4blue\\Zn\" have been added, with color \"black\" are not added.\\n\\n"
msgstr "名称颜色为\"\\Z4蓝色\\Zn\"的为已添加, 颜色为\"黑色\"的为未添加.\\n\\n"

#: menu.sh:562 menu.sh:691 menu.sh:1703 menu.sh:2316
msgid "This feature is only available when accessed via ssh (Requires a terminal that supports ZModem protocol)."
msgstr "此功能仅在通过 ssh 访问时可用(需要支持ZModem协议的终端)."

#: menu.sh:566
msgid "Please upload the *.addons file."
msgstr "请上传 *.addons 文件."

#: menu.sh:580 menu.sh:724 menu.sh:2343 menu.sh:2363
msgid "Not a valid file, please try again!"
msgstr "不是有效的文件, 请重试!"

#: menu.sh:584
msgid "The addon already exists. Do you want to overwrite it?"
msgstr "该插件已存在, 是否覆盖?"

#: menu.sh:592
msgid "Addon '%s' added to loader, Please enable it in 'Add an addon' menu."
msgstr "插件 '%s' 已添加到引导中, 请在'添加插件' 菜单中开启."

#: menu.sh:595
msgid "File format not recognized!"
msgstr "文件格式无法识别!"

#: menu.sh:613 menu.sh:625 menu.sh:638 menu.sh:675 menu.sh:690 menu.sh:700 menu.sh:703 menu.sh:719 menu.sh:723
msgid "Modules"
msgstr "模块"

#: menu.sh:615
msgid "Show/Select modules"
msgstr "显示/选择模块"

#: menu.sh:616
msgid "Select loaded modules"
msgstr "选择已识别的模块"

#: menu.sh:617
msgid "Upload a external module"
msgstr "上传一个外部模块"

#: menu.sh:618
msgid "Priority use of official drivers:"
msgstr "优先使用官方模块:"

#: menu.sh:626
msgid "Reading modules ..."
msgstr "读取模块中 ..."

#: menu.sh:639
msgid "Select all"
msgstr "选择全部"

#: menu.sh:640
msgid "Deselect all"
msgstr "取消全选"

#: menu.sh:641
msgid "Select modules to include"
msgstr "选择要加载的插件"

#: menu.sh:676
msgid "Selecting loaded modules"
msgstr "选择已识别的模块"

#: menu.sh:695
msgid "This function is experimental and dangerous. If you don't know much, please exit.\\n"
msgstr "这个功能是实验性的, 很危险. 如果你知道的不多, 请退出. \\n"

#: menu.sh:696
msgid "The imported .ko of this function will be implanted into the corresponding arch's modules package, which will affect all models of the arch.\\n"
msgstr "该功能导入 .ko 将被植入相应的架构的模块包中, 这将影响该架构的所有型号.\\n"

#: menu.sh:697
msgid "This program will not determine the availability of imported modules or even make type judgments, as please double check if it is correct.\\n"
msgstr "该程序不会判断导入的驱动模块的可用性, 甚至不会做类型判断, 因从请你再三确认是否正确.\\n"

#: menu.sh:698
msgid "If you want to remove it, please go to the \"Update Menu\" -> \"Update modules\" to forcibly update the modules. All imports will be reset.\\n"
msgstr "如果您想删除它, 请转到 \"更新\"->\"更新模块\" 强制更新模块, 所有导入都将被重置.\\n"

#: menu.sh:699
msgid "Do you want to continue?"
msgstr "是否继续?"

#: menu.sh:704
msgid "Please upload the *.ko file."
msgstr "请上传 *.ko 文件."

#: menu.sh:720
msgid "Module '%s' added to %s-%s"
msgstr "模块 '%s' 已添加到 %s-%s"

#: menu.sh:742
msgid "Add/Edit a cmdline item"
msgstr "添加/编辑 cmdline 参数"

#: menu.sh:743
msgid "Show/Delete cmdline items"
msgstr "显示/删除 cmdline 参数"

#: menu.sh:745
msgid "Define SN/MAC"
msgstr "自定义 SN/MAC"

#: menu.sh:747
msgid "Show model inherent cmdline"
msgstr "显示型号默认的 cmdline 参数"

#: menu.sh:749 menu.sh:766 menu.sh:775 menu.sh:799 menu.sh:807 menu.sh:824 menu.sh:835 menu.sh:867
msgid "Cmdline"
msgstr "Cmdline"

#: menu.sh:756
msgid "Commonly used cmdlines:\\n"
msgstr "常用 cmdlines:\\n"

#: menu.sh:757
msgid " * \\Z4disable_mtrr_trim=\\Zn\\n    disables kernel trim any uncacheable memory out.\\n"
msgstr " * \\Z4disable_mtrr_trim=\\Zn\\n    禁用内核修剪任何不可缓存的内存.\\n"

#: menu.sh:758
msgid " * \\Z4intel_idle.max_cstate=1\\Zn\\n    Set the maximum C-state depth allowed by the intel_idle driver.\\n"
msgstr " * \\Z4intel_idle.max_cstate=1\\Zn\\n    设置 intel_idle 驱动允许使用的最大 C-state 深度.\\n"

#: menu.sh:759
msgid " * \\Z4SataPortMap=??\\Zn\\n    Sata Port Map.\\n"
msgstr " * \\Z4SataPortMap=??\\Zn\\n    Sata Port Map.\\n"

#: menu.sh:760
msgid " * \\Z4DiskIdxMap=??\\Zn\\n    Disk Index Map, Modify disk name sequence.\\n"
msgstr " * \\Z4DiskIdxMap=??\\Zn\\n    Disk Index Map, 修改磁盘名称顺序.\\n"

#: menu.sh:761
msgid " * \\Z4i915.enable_guc=2\\Zn\\n    Enable the GuC firmware on Intel graphics hardware.(value: 1,2 or 3)\\n"
msgstr " * \\Z4i915.enable_guc=2\\Zn\\n    启用 Intel 核显上的 GuC 固件.(值: 1,2 or 3)\\n"

#: menu.sh:762
msgid " * \\Z4i915.max_vfs=7\\Zn\\n     Set the maximum number of virtual functions (VFs) that can be created for Intel graphics hardware.\\n"
msgstr " * \\Z4i915.max_vfs=7\\Zn\\n     设置可创建虚拟核显 (VFs) 的最大数量.\\n"

#: menu.sh:763 menu.sh:894
msgid "\\nEnter the parameter name and value you need to add.\\n"
msgstr "\\n输入需要添加的参数名称和值.\\n"

#: menu.sh:776 menu.sh:907
msgid "Invalid parameter name, retry?"
msgstr "无效参数名称, 重试?"

#: menu.sh:800
msgid "No user cmdline to remove"
msgstr "没有用户参数被删除"

#: menu.sh:808
msgid "Select cmdline to remove"
msgstr "选择要删除的参数"

#: menu.sh:819
msgid "Note: (MAC will not be set to NIC, Only for activation services.)"
msgstr "注意: (MAC 不会设置到 NIC, 仅用于激活服务.)"

#: menu.sh:825
msgid "Random"
msgstr "随机"

#: menu.sh:836
msgid "Invalid SN/MAC, retry?"
msgstr "无效 SN/MAC, 重试?"

#: menu.sh:879
msgid "Add/edit a synoinfo item"
msgstr "添加/编辑 Synoinfo 参数"

#: menu.sh:880
msgid "Show/Delete synoinfo items"
msgstr "显示/删除 Synoinfo 参数"

#: menu.sh:882 menu.sh:897 menu.sh:906 menu.sh:931 menu.sh:939
msgid "Synoinfo"
msgstr "Synoinfo"

#: menu.sh:889
msgid "Commonly used synoinfo:\\n"
msgstr "常用 synoinfo:\\n"

#: menu.sh:890
msgid " * \\Z4maxdisks=??\\Zn\\n    Maximum number of disks supported.\\n"
msgstr " * \\Z4maxdisks=??\\Zn\\n    最大硬盘数.\\n"

#: menu.sh:891
msgid " * \\Z4internalportcfg=0x????\\Zn\\n    Internal(sata) disks mask.\\n"
msgstr " * \\Z4internalportcfg=0x????\\Zn\\n    Internal(sata) 磁盘掩码.\\n"

#: menu.sh:892
msgid " * \\Z4esataportcfg=0x????\\Zn\\n    Esata disks mask.\\n"
msgstr " * \\Z4esataportcfg=0x????\\Zn\\n    Esata 磁盘掩码.\\n"

#: menu.sh:893
msgid " * \\Z4usbportcfg=0x????\\Zn\\n    USB disks mask.\\n"
msgstr " * \\Z4usbportcfg=0x????\\Zn\\n    USB 磁盘掩码.\\n"

#: menu.sh:932
msgid "No synoinfo entries to remove"
msgstr "没有 Synoinfo 参数被删除"

#: menu.sh:940
msgid "Select synoinfo entry to remove"
msgstr "选择要删除的参数"

#: menu.sh:970
msgid "Downloading old pat to extract synology .pat extractor..."
msgstr "下载旧 pat, 提取 .pat 解密程序中..."

#: menu.sh:976 menu.sh:1110
msgid "Check internet or cache disk space.\\nError: %d:%d"
msgstr "请检查网络连接或磁盘空间.\\nError: %d:%d"

#: menu.sh:1015
msgid "Uncompressed tar"
msgstr "未压缩 tar"

#: menu.sh:1019
msgid "Compressed tar"
msgstr "已压缩 tar"

#: menu.sh:1023
msgid "Encrypted"
msgstr "已加密"

#: menu.sh:1027
msgid "Could not determine if pat file is encrypted or not, maybe corrupted, try again!"
msgstr "无法确定 pat 文件是否加密, 可能已损坏, 请重试!"

#: menu.sh:1034 menu.sh:1126
msgid "Disassembling %s: "
msgstr "解压缩 %s: "

#: menu.sh:1041
msgid "Extractor cached."
msgstr "已存在解密程序."

#: menu.sh:1047 menu.sh:1050
msgid "Extracting ..."
msgstr "解压中 ..."

#: menu.sh:1083
msgid "%s cached."
msgstr "%s 已缓存."

#: menu.sh:1087
msgid "Cleaning cache ..."
msgstr "清除缓存 ..."

#: menu.sh:1096
msgid "Based on the current network situation, switch to %s mirror to downloading."
msgstr "根据当前的网络状况, 已切换到 %s 镜像服务器进行下载."

#: menu.sh:1099
msgid "Downloading %s ..."
msgstr "下载 %s 中 ..."

#: menu.sh:1116
msgid "Checking hash of %s: "
msgstr "检查 %s 的 hash: "

#: menu.sh:1119
msgid "md5 hash of pat not match, Please reget pat data from the version menu and try again!"
msgstr "pat 的 md5 Hash 不匹配, 请在版本菜单中重新获取 pat 数据后重试!"

#: menu.sh:1122 menu.sh:1138 menu.sh:1148
msgid "OK"
msgstr "OK"

#: menu.sh:1133
msgid "Setting hash: "
msgstr "设置 hash: "

#: menu.sh:1140
msgid "Copying files: "
msgstr "拷贝文件: "

#: menu.sh:1164
msgid "Addon %s not found!"
msgstr "插件 %s 未找到!"

#: menu.sh:1190
msgid "Cleaning ..."
msgstr "清除中 ..."

#: menu.sh:1192
msgid "Ready!"
msgstr "已就绪!"

#: menu.sh:1217
msgid "Switch LKM version:"
msgstr "选择 LKM 版本:"

#: menu.sh:1218
msgid "HDD sort(hotplug):"
msgstr "HDD 排序(hotplug):"

#: menu.sh:1221
msgid "Switch direct boot:"
msgstr "切换直接启动:"

#: menu.sh:1223
msgid "Timeout of get ip in boot:"
msgstr "启动时获取 IP 的超时时间:"

#: menu.sh:1224
msgid "Timeout of boot wait:"
msgstr "启动超时时间:"

#: menu.sh:1225
msgid "kernel switching method:"
msgstr "内核切换的方式:"

#: menu.sh:1227
msgid "Reboot on kernel panic:"
msgstr "内核恐慌时重新启动:"

#: menu.sh:1229
msgid "Set static IP"
msgstr "设置静态 IP"

#: menu.sh:1230
msgid "Set wireless account"
msgstr "设置无线帐号"

#: menu.sh:1231
msgid "Edit user config file manually"
msgstr "手动编辑用户配置文件"

#: menu.sh:1232
msgid "Edit grub.cfg file manually"
msgstr "手动编辑 grub.cfg 文件"

#: menu.sh:1233
msgid "Try to recovery a DSM installed system"
msgstr "尝试恢复已安装 DSM 的系统"

#: menu.sh:1234
msgid "Show disks information"
msgstr "显示磁盘信息"

#: menu.sh:1236
msgid "show/modify the current pat data"
msgstr "显示/修改当前 pat 下载链接"

#: menu.sh:1238
msgid "Allow downgrade installation"
msgstr "允许降级安装"

#: menu.sh:1239
msgid "Format disk(s) # Without loader disk"
msgstr "格式化磁盘(s) # 不含启动盘"

#: menu.sh:1240
msgid "Reset DSM system password"
msgstr "重置 DSM 系统密码"

#: menu.sh:1241
msgid "Force enable telnet of DSM system"
msgstr "强制打开 DSM 的 telnet"

#: menu.sh:1242
msgid "Save modifications of '/opt/rr'"
msgstr "保存'/opt/rr'的修改"

#: menu.sh:1244
msgid "Custom dts file # Need rebuild"
msgstr "自定义 dts 文件 # 需要重新编译"

#: menu.sh:1246
msgid "Custom patch script # Developer"
msgstr "自定义补丁脚本 # 开发"

#: menu.sh:1248
msgid "Use EMMC as the system disk:"
msgstr "使用 EMMC 作为系统磁盘:"

#: menu.sh:1250
msgid "Clone bootloader disk to another disk"
msgstr "克隆引导盘到另一个磁盘"

#: menu.sh:1251
msgid "Report bugs to the author"
msgstr "向作者报告错误"

#: menu.sh:1252
msgid "Install development tools"
msgstr "安装开发者工具"

#: menu.sh:1253
msgid "Show QR logo:"
msgstr "显示 QR logo:"

#: menu.sh:1254
msgid "Set global proxy"
msgstr "设置全局代理"

#: menu.sh:1255
msgid "Set github proxy"
msgstr "设置 GitHub 代理"

#: menu.sh:1258 menu.sh:1282 menu.sh:1294 menu.sh:1314 menu.sh:1337 menu.sh:1361 menu.sh:1366 menu.sh:1378 menu.sh:1387 menu.sh:1409 menu.sh:1510 menu.sh:1517 menu.sh:1535 menu.sh:1548 menu.sh:1551 menu.sh:1564 menu.sh:1568 menu.sh:1569 menu.sh:1574
#: menu.sh:1578 menu.sh:1593 menu.sh:1595 menu.sh:1618 menu.sh:1622 menu.sh:1629 menu.sh:1635 menu.sh:1653 menu.sh:1655 menu.sh:1659 menu.sh:1673 menu.sh:1675 menu.sh:1679 menu.sh:1682 menu.sh:1697 menu.sh:1702 menu.sh:1706 menu.sh:1721 menu.sh:1726
#: menu.sh:1737 menu.sh:1769 menu.sh:1773 menu.sh:1779 menu.sh:1785 menu.sh:1791 menu.sh:1822 menu.sh:1835 menu.sh:1839 menu.sh:1849 menu.sh:1854 menu.sh:1861 menu.sh:1863 menu.sh:1875 menu.sh:1886 menu.sh:1908 menu.sh:1919
msgid "Advanced"
msgstr "高级"

#: menu.sh:1259
msgid "Advanced option"
msgstr "高级设置"

#: menu.sh:1283 menu.sh:1295 menu.sh:1315
msgid "Choose a time(seconds)"
msgstr "选择一个时间(秒)"

#: menu.sh:1325
msgid "Temporary IP: (UI will not refresh)"
msgstr "临时 IP: (UI 不会刷新)"

#: menu.sh:1362
msgid "Setting IP ..."
msgstr "设置 IP ..."

#: menu.sh:1367
msgid "Scanning ..."
msgstr "扫描中 ..."

#: menu.sh:1370
msgid "Scanned SSIDs:\\n"
msgstr "扫描到的 SSIDs:\\n"

#: menu.sh:1388
msgid "Invalid SSID/PSK, retry?"
msgstr "无效 SSID/PSK, 重试?"

#: menu.sh:1410
msgid "Setting ..."
msgstr "设置中 ..."

#: menu.sh:1508
msgid "\\nTotal of ports: %s\\n"
msgstr "\\n端口总数: %s\\n"

#: menu.sh:1509
msgid "\\nPorts with color \\Z1red\\Zn as DUMMY, color \\Z2\\Zbgreen\\Zn has drive connected."
msgstr "\\n\\Z1红色\\Zn 为模拟端口, \\Z2\\Zb绿色\\Zn 为已驱动的物理端口."

#: menu.sh:1516
msgid "pat: (editable)"
msgstr "pat: (可编辑)"

#: menu.sh:1532
msgid "This feature will allow you to downgrade the installation by removing the VERSION file from the first partition of all disks.\\n"
msgstr "此功能通过删除所有磁盘的第一个分区的 VERSION 文件来允许你降级安装.\\n"

#: menu.sh:1533
msgid "Therefore, please insert all disks before continuing.\\n"
msgstr "因此, 请插入所有磁盘后再进行操作.\\n"

#: menu.sh:1534 menu.sh:1575
msgid "Warning:\\nThis operation is irreversible. Please backup important data. Do you want to continue?"
msgstr "警告:\\n该操作不可逆, 请提前备份重要数据. 是否继续?"

#: menu.sh:1549
msgid "Removing ..."
msgstr "删除中 ..."

#: menu.sh:1550
msgid "Remove VERSION file for all disks completed."
msgstr "已移除所有磁盘的 VERSION 文件."

#: menu.sh:1565 menu.sh:1770
msgid "No disk found!"
msgstr "未找到磁盘!"

#: menu.sh:1579
msgid "Warning:\\nThe current hds is in raid, do you still want to format them?"
msgstr "警告:\\n当前的硬盘处于 raid 中，是否仍要格式化?"

#: menu.sh:1594
msgid "Formatting ..."
msgstr "格式化中 ..."

#: menu.sh:1596
msgid "Formatting is complete."
msgstr "格式化完成."

#: menu.sh:1619
msgid "The installed Syno system not found in the currently inserted disks!"
msgstr "未在当前插入的硬盘中找到已安装的 syno 系统!"

#: menu.sh:1623
msgid "Choose a user name"
msgstr "选择一个用户"

#: menu.sh:1630
msgid "Type a new password for user '%s'"
msgstr "输入用户 '%s' 的新密码"

#: menu.sh:1636
msgid "Invalid password"
msgstr "无效密码"

#: menu.sh:1654
msgid "Resetting ..."
msgstr "重置中 ..."

#: menu.sh:1656
msgid "Password reset completed."
msgstr "重置密码完成."

#: menu.sh:1660
msgid "Please insert all disks before continuing.\\n"
msgstr "请插入所有磁盘后再进行操作.\\n"

#: menu.sh:1674
msgid "Enabling ..."
msgstr "开启中 ..."

#: menu.sh:1676
msgid "Telnet is enabled."
msgstr "Telnet 已开启."

#: menu.sh:1680
msgid "Warning:\\nDo not terminate midway, otherwise it may cause damage to the RR. Do you want to continue?"
msgstr "警告:\\n请不要中途停止, 否则将导致 RR 引导损毁, 是否继续?"

#: menu.sh:1683
msgid "Saving ...\\n(It usually takes 5-10 minutes, please be patient and wait.)"
msgstr "保存中 ...\\n(一般需要 5~10 分钟，请耐心等待.)"

#: menu.sh:1698
msgid "Save is complete."
msgstr "保存完成."

#: menu.sh:1707
msgid "Currently, only dts format files are supported. Please prepare and click to confirm uploading.\\n(saved in /mnt/p3/users/)"
msgstr "目前, 只支持 dts 格式的文件, 请准备并点击确认上传.\\n(保存于 /mnt/p3/users/ 中)"

#: menu.sh:1722
msgid "Not a valid dts file, please try again!"
msgstr "dts 文件无效, 请重试!"

#: menu.sh:1727
msgid "A valid dts file, Automatically import at compile time."
msgstr "dts 文件有效, 将在编译时自动导入."

#: menu.sh:1733
msgid "This option is only informative.\\n\\n"
msgstr "此选项仅为提示.\\n\\n"

#: menu.sh:1734
msgid "This program reserves an interface for ramdisk custom patch scripts.\\n"
msgstr "此程序为 ramdisk 自定义补丁脚本保留了一个接口.\\n"

#: menu.sh:1735
msgid "Call timing: called before ramdisk packaging.\\n"
msgstr "调用时机: 在 ramdisk 打包前调用.\\n"

#: menu.sh:1736
msgid "Location: /mnt/p3/scripts/*.sh\\n"
msgstr "位置: /mnt/p3/scripts/*.sh\\n"

#: menu.sh:1774
msgid "Choose a disk to clone to"
msgstr "选择要克隆到的磁盘"

#: menu.sh:1780
msgid "No disk selected!"
msgstr "未选择磁盘!"

#: menu.sh:1786
msgid "Disk %s size is less than 1GB and cannot be cloned!"
msgstr "磁盘 %s 的大小小于 1GB，无法克隆!"

#: menu.sh:1790
msgid "Warning:\\nDisk %s will be formatted and written to the bootloader. Please confirm that important data has been backed up. \\nDo you want to continue?"
msgstr "警告:\\n磁盘 %s 将被格式化并写入引导程序. 请确认重要数据已备份. \\n是否继续?"

#: menu.sh:1823
msgid "Cloning ..."
msgstr "克隆中 ..."

#: menu.sh:1825
msgid "Bootloader has been cloned to disk %s, please remove the current bootloader disk!\\nReboot?"
msgstr "引导程序已克隆到磁盘 %s, 请移除当前引导盘! \\n重启？"

#: menu.sh:1836
msgid "Please via %s to download the logs,\\nAnd go to github to create an issue and upload the logs."
msgstr "请通过 %s 下载日志 logs,\\n并前往 github 创建问题并上传日志 logs."

#: menu.sh:1840
msgid "Please go to github to create an issue and upload the logs."
msgstr "请前往 github 创建问题并上传日志 logs."

#: menu.sh:1844
msgid "\\Z1No logs found!\\Zn\\n\\n"
msgstr "\\Z1日志 logs 未找到!\\Zn\\n\\n"

#: menu.sh:1845
msgid "Please do as follows:\\n"
msgstr "请按如下操作:\\n"

#: menu.sh:1846
msgid " 1. Add dbgutils in addons and rebuild.\\n"
msgstr " 1. 在插件中添加 dbgutils 并重新编译.\\n"

#: menu.sh:1847
msgid " 2. Wait 10 minutes after booting.\\n"
msgstr " 2. 启动后等待10分钟.\\n"

#: menu.sh:1848
msgid " 3. Reboot into RR and go to this option.\\n"
msgstr " 3. 重启到 RR 并回到该选项.\\n"

#: menu.sh:1855
msgid "This option only installs opkg package management, allowing you to install more tools for use and debugging. Do you want to continue?"
msgstr "该选项仅安装 opkg 包管理工具, 使你能够安装更多的工具以供使用和调试, 是否继续?"

#: menu.sh:1862
msgid "opkg installing ..."
msgstr "opkg 安装中 ..."

#: menu.sh:1864
msgid "opkg install is complete. Please reconnect to ssh/web, or execute 'source ~/.bashrc'"
msgstr "opkg 安装完成. 请重新链接 ssh/web, 或者执行 'source ~/.bashrc'"

#: menu.sh:1876
msgid "Please enter a proxy server url.(e.g., http://192.168.1.1:7981/)"
msgstr "请输入代理服务器 url.(e.g., http://192.168.1.1:7981/)"

#: menu.sh:1887 menu.sh:1920
msgid "Invalid proxy server url, continue?"
msgstr "无效的代理服务器 url, 是否继续?"

#: menu.sh:1909
msgid "Please enter a proxy server url.(e.g., https://mirror.ghproxy.com/)"
msgstr "请输入代理服务器 url.(e.g., https://mirror.ghproxy.com/)"

#: menu.sh:1940 menu.sh:1975 menu.sh:1982
msgid "Try recovery DSM"
msgstr "尝试恢复 DSM 系统"

#: menu.sh:1941
msgid "Trying to recovery a DSM installed system ..."
msgstr "尝试恢复已安装的 DSM 系统中 ..."

#: menu.sh:1969
msgid "Found a installation:\\nModel: %s\\nProductversion: %s"
msgstr "找到已安装:\\n型号:  %s\\n版本: %s"

#: menu.sh:1973
msgid "\\nSerial: %s"
msgstr "\\nSN: %s"

#: menu.sh:1983
msgid "Unfortunately I couldn't mount the DSM partition!"
msgstr "很遗憾, 我无法挂载 DSM 分区!"

#: menu.sh:1991 menu.sh:1997 menu.sh:2020
msgid "Edit with caution"
msgstr "请谨慎编辑"

#: menu.sh:2031
msgid "Alert"
msgstr "警告"

#: menu.sh:2032
msgid "Config changed, would you like to rebuild the loader?"
msgstr "配置已更改, 是否重新编译引导?"

#: menu.sh:2044 menu.sh:2421
msgid "Choose a language"
msgstr "选择语言"

#: menu.sh:2058
msgid "Choose a layout"
msgstr "选择布局"

#: menu.sh:2070
msgid "Choice a keymap"
msgstr "选择键盘映射"

#: menu.sh:2089 menu.sh:2142 menu.sh:2193 menu.sh:2260 menu.sh:2265 menu.sh:2270 menu.sh:2275 menu.sh:2282 menu.sh:2290 menu.sh:2298 menu.sh:2306
msgid "Update %s"
msgstr "更新 %s"

#: menu.sh:2092
msgid "Checking last version ..."
msgstr "检测新版本中 ..."

#: menu.sh:2103 menu.sh:2106
msgid "Error checking new version.\\nError: TAG is %s"
msgstr "检测新版本错误.\\nError: TAG is %s"

#: menu.sh:2113
msgid "No new version."
msgstr "没有新版本."

#: menu.sh:2117
msgid "No new version. Actual version is %s\\nForce update?"
msgstr "没有新版本. 实际版本为 %s\\n强制更新?"

#: menu.sh:2126
msgid "Downloading ..."
msgstr "下载中 ..."

#: menu.sh:2130 menu.sh:2133
msgid "Error downloading new version.\\nError: %d:%d"
msgstr "下载新版本错误.\\nError: %d:%d"

#: menu.sh:2144 menu.sh:2195
msgid "Extracting last version"
msgstr "解压新版本"

#: menu.sh:2148
msgid "Error extracting update file"
msgstr "更新文件解压错误"

#: menu.sh:2155
msgid "Checksum do not match!"
msgstr "Checksum 不匹配!"

#: menu.sh:2164
msgid "The current version does not support upgrading to the latest update.zip. Please remake the bootloader disk!"
msgstr "当前版本不支持最新的 update.zip 升级, 请重新制作引导盘!"

#: menu.sh:2169
msgid "Installing new files ..."
msgstr "安装更新中 ..."

#: menu.sh:2186
msgid "RR updated with success to %s!\\nReboot?"
msgstr "RR 更新成功 %s!\\n重启?"

#: menu.sh:2201
msgid "Installing new %s ..."
msgstr "安装新 %s 中 ..."

#: menu.sh:2230 menu.sh:2233
msgid "%s updated with success!"
msgstr "%s 更新成功!"

#: menu.sh:2245
msgid "Update all"
msgstr "更新全部"

#: menu.sh:2246
msgid "Update RR"
msgstr "更新 RR"

#: menu.sh:2247
msgid "Update addons"
msgstr "更新插件"

#: menu.sh:2248
msgid "Update modules"
msgstr "更新模块"

#: menu.sh:2249
msgid "Update LKMs"
msgstr "更新LKMs"

#: menu.sh:2250
msgid "Local upload"
msgstr "本地上传"

#: menu.sh:2251
msgid "Pre Release:"
msgstr "预发布:"

#: menu.sh:2255
msgid "Manually uploading update.zip,addons.zip,modules.zip,rp-lkms.zip to /tmp/ will skip the download."
msgstr "手动上传 update.zip,addons.zip,modules.zip,rp-lkms.zip 到 /tmp/ 将跳过下载."

#: menu.sh:2260 menu.sh:2290
msgid "addons"
msgstr "插件"

#: menu.sh:2265 menu.sh:2298
msgid "modules"
msgstr "模块"

#: menu.sh:2270 menu.sh:2306
msgid "LKMs"
msgstr "LKMs"

#: menu.sh:2275 menu.sh:2282
msgid "RR"
msgstr "RR"

#: menu.sh:2320
msgid "Please keep the attachment name consistent with the attachment name on Github.\\n"
msgstr "请保持附件名称与 github 上附件名称一致.\\n"

#: menu.sh:2321
msgid "Upload update*.zip will update RR.\\n"
msgstr "上传 update*.zip 将更新 RR.\\n"

#: menu.sh:2322
msgid "Upload addons*.zip will update Addons.\\n"
msgstr "上传 addons*.zip 将更新 插件.\\n"

#: menu.sh:2323
msgid "Upload modules*.zip will update Modules.\\n"
msgstr "上传 modules*.zip 将更新 模块.\\n"

#: menu.sh:2324
msgid "Upload rp-lkms*.zip will update LKMs.\\n"
msgstr "上传 rp-lkms*.zip 将更新 LKMs.\\n"

#: menu.sh:2379
msgid "This person is very lazy and hasn't written anything."
msgstr "这个人很懒, 什么也没有写."

#: menu.sh:2401
msgid "Choose a model"
msgstr "选择型号"

#: menu.sh:2403
msgid "Choose a version"
msgstr "选择版本"

#: menu.sh:2405
msgid "Parse pat"
msgstr "解析 pat"

#: menu.sh:2407
msgid "Addons menu"
msgstr "插件"

#: menu.sh:2408
msgid "Modules menu"
msgstr "模块"

#: menu.sh:2409
msgid "Cmdline menu"
msgstr "设置 Cmdline"

#: menu.sh:2410
msgid "Synoinfo menu"
msgstr "设置 Synoinfo"

#: menu.sh:2412
msgid "Advanced menu"
msgstr "高级设置"

#: menu.sh:2415
msgid "Build the loader"
msgstr "编译引导"

#: menu.sh:2419
msgid "Boot the loader"
msgstr "启动"

#: menu.sh:2422
msgid "Choose a keymap"
msgstr "选择键盘"

#: menu.sh:2424
msgid "Clean disk cache"
msgstr "清除磁盘缓存"

#: menu.sh:2426
msgid "Update menu"
msgstr "更新"

#: menu.sh:2427
msgid "Notepad"
msgstr "备注"

#: menu.sh:2499
msgid "Choose a action"
msgstr "选择动作"

#: menu.sh:2500
msgid "Poweroff"
msgstr "关机"

#: menu.sh:2501
msgid "Reboot"
msgstr "重启"

#: menu.sh:2502
msgid "Reboot to RR"
msgstr "重启到 RR"

#: menu.sh:2503
msgid "Back to shell"
msgstr "退出到 shell"

#: menu.sh:2529
msgid "Call \\033[1;32mmenu.sh\\033[0m to return to menu"
msgstr "执行 \\033[1;32mmenu.sh\\033[0m 重新进入设置菜单"

#~ msgid "Load local pat"
#~ msgstr "加载本地 pat"