RROrg-rr/files/initrd/opt/rr/lang/zh_CN.po

# Chinese translations for RR package.
# Copyright (C) 2023 THE RR'S COPYRIGHT HOLDER
# This file is distributed under the same license as the RR package.
# ing <wjz304@qq.com>, 2023.
#
msgid ""
msgstr ""
"Project-Id-Version: RR\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2023-10-31 17:00+0800\n"
"PO-Revision-Date: 2023-10-31 17:00+0800\n"
"Last-Translator: ing <wjz304@qq.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 3.4.1\n"

#: boot.sh:8 init.sh:9 menu.sh:9
msgid "Loader is not init!"
msgstr "引导未初始化!"

#: boot.sh:10 init.sh:104
msgid "Loader is not configured!"
msgstr "引导未配置!"

#: boot.sh:20 init.sh:14
msgid "Welcome to %s"
msgstr "Welcome to %s"

#: boot.sh:33
msgid "DSM zImage changed"
msgstr "DSM zImage 已更改"

#: boot.sh:36 menu.sh:993
msgid ""
"zImage not patched,\\nPlease upgrade the bootloader version and try again."
"\\nPatch error:\\n"
msgstr "zImage 打补丁失败,\\n请升级引导版本并重试.\\nPatch 错误:\\n"

#: boot.sh:45
msgid "DSM Ramdisk changed"
msgstr "DSM Ramdisk 已更改"

#: boot.sh:48 menu.sh:999
msgid ""
"Ramdisk not patched,\\nPlease upgrade the bootloader version and try again."
"\\nPatch error:\\n"
msgstr "Ramdisk 打补丁失败,\\n请升级引导版本并重试.\\nPatch 错误:\\n"

#: boot.sh:67
msgid "Model:"
msgstr "型号: "

#: boot.sh:68
msgid "Build:"
msgstr "版本: "

#: boot.sh:69
msgid "LKM:  "
msgstr "LKM:  "

#: boot.sh:70
msgid "DMI:  "
msgstr "DMI:  "

#: boot.sh:71
msgid "CPU:  "
msgstr "CPU:  "

#: boot.sh:72
msgid "MEM:  "
msgstr "MEM:  "

#: boot.sh:75
msgid ""
"The current version of bootloader does not support booting %s-%s, please "
"upgrade and rebuild."
msgstr "当前版本的引导盘不支持引导 %s-%s, 请升级并重新编译."

#: boot.sh:87
msgid ""
"Please insert at least one sata/scsi disk for system installation, except "
"for the bootloader disk."
msgstr "除引导盘外, 请至少插入一块 sata/scsi 磁盘进行系统安装."

#: boot.sh:150
msgid "Cmdline:\\n"
msgstr "Cmdline:\\n"

#: boot.sh:156
msgid "Reboot to boot directly in DSM"
msgstr "重启并直接进入 DSM 引导"

#: boot.sh:162 init.sh:117
msgid "Detected %s network cards."
msgstr "检测到 %s 个网卡."

#: boot.sh:163 init.sh:118
msgid "Checking Connect."
msgstr "检查连接."

#: boot.sh:183
msgid "Waiting IP.(For reference only)"
msgstr "获取 IP.(仅供参考)"

#: boot.sh:190 init.sh:143
msgid "DOWN"
msgstr "关闭"

#: boot.sh:194 init.sh:147
msgid "NOT CONNECTED"
msgstr "未连接"

#: boot.sh:198 init.sh:151
msgid "TIMEOUT (Please check the IP on the router.)"
msgstr "超时 (请检查路由器上的IP.)"

#: boot.sh:204
msgid "Access \\033[1;34mhttp://%s:5000\\033[0m to connect the DSM via web."
msgstr "在浏览器中访问 \\033[1;34mhttp://%s:5000\\033[0m 链接 DSM."

#: boot.sh:216
msgid "%2ds (Changing access(ssh/web) status will interrupt boot)"
msgstr "%2ds ((ssh/web)连接状态改变将中断启动)"

#: boot.sh:220
msgid "access(ssh/web) status has changed and booting is interrupted."
msgstr "(ssh/web)连接状态已改变, 启动被中断."

#: boot.sh:230
msgid "Loading DSM kernel..."
msgstr "加载 DSM 内核..."

#: boot.sh:243
msgid "Warning, running kexec with --noefi param, strange things will happen!!"
msgstr "警告, 使用'--noefi'参数运行'kexec', 可能有不好的事情发生!!"

#: boot.sh:248
msgid "Booting..."
msgstr "引导中..."

#: boot.sh:250
msgid ""
"[This interface will not be operational. Please wait a few minutes.\\nFind "
"DSM via http://find.synology.com/ or Synology Assistant and connect.]"
msgstr ""
"[该界面已不可操作. 请在数分钟后\\n通过 http://find.synology.com/ 或者 "
"Synology Assistant 查找 DSM 并访问.]"

#: init.sh:23
msgid "Network devices not found!"
msgstr "未找到网卡!"

#: init.sh:81
msgid "Loader disk neither USB or SATA/SCSI/NVME DoM"
msgstr "引导磁盘仅支持 USB 或者 SATA/SCSI/NVME DoM"

#: init.sh:89
msgid "Loader disk:"
msgstr "引导盘:"

#: init.sh:97
msgid "Loading keymap"
msgstr "加载键盘映射"

#: init.sh:107
msgid "User requested edit settings."
msgstr "用户触发编辑设置."

#: init.sh:136
msgid "Waiting IP."
msgstr "获取 IP."

#: init.sh:157
msgid ""
"Access \\033[1;34mhttp://%s:7681\\033[0m to configure the loader via web "
"terminal."
msgstr ""
"在浏览器中访问 \\033[1;34mhttp://%s:7681\\033[0m 进入 WEB 终端进行配置."

#: init.sh:167
msgid "Call \\033[1;32mmenu.sh\\033[0m to configure loader"
msgstr "执行 \\033[1;32mmenu.sh\\033[0m 进入设置菜单"

#: init.sh:169
msgid "User config is on"
msgstr "用户配置文件位于"

#: init.sh:170
msgid "Default SSH Root password is"
msgstr "默认 SSH 的 root 密码为"

#: init.sh:184
msgid ""
"You have less than 4GB of RAM, if errors occur in loader creation, please "
"increase the amount of memory."
msgstr "您的 RAM 不足 4GB, 如果在创建引导时出现错误, 请增加内存."

#: menu.sh:92
msgid "Model"
msgstr "型号"

#: menu.sh:93
msgid "Reading models"
msgstr "读取型号"

#: menu.sh:103
msgid "Compatibility judgment"
msgstr "兼容性判断"

#: menu.sh:124
msgid "Disable flags restriction"
msgstr "禁用标志限制"

#: menu.sh:125
msgid "Show all models"
msgstr "显示所有型号"

#: menu.sh:127
msgid "Choose the model"
msgstr "选择型号"

#: menu.sh:215
msgid "Choose a product version"
msgstr "选择版本"

#: menu.sh:225 menu.sh:231 menu.sh:242 menu.sh:268 menu.sh:288
msgid "Product Version"
msgstr "版本"

#: menu.sh:226
msgid ""
"The current version has been set to %s. Do you want to reset the version?"
msgstr "当前版本已设置为 %s. 是否要重置版本?"

#: menu.sh:232
msgid ""
"This version does not support UEFI startup, Please select another version or "
"switch the startup mode."
msgstr "该版本不支持 UEFI 启动, 请选择其他版本或者切换启动模式."

#: menu.sh:243
msgid "Get pat data ..."
msgstr "获取 pat 数据 ..."

#: menu.sh:262
msgid ""
"Failed to get pat data,\\nPlease manually fill in the URL and md5sum of the "
"corresponding version of pat."
msgstr "获取 pat 数据失败,\\n请手动填写相应版本 pat 的 URL 和 MD5."

#: menu.sh:266
msgid "Successfully to get pat data,\\nPlease confirm or modify as needed."
msgstr "获取 pat 数据成功,\\n请确认或者按需修改."

#: menu.sh:269
msgid "Retry"
msgstr "重试"

#: menu.sh:289
msgid "Reconfiguring Synoinfo, Addons and Modules"
msgstr "重新配置 Syninfo, 插件和模块"

#: menu.sh:334 menu.sh:464 menu.sh:595 menu.sh:721 menu.sh:1864
msgid "Choose a option"
msgstr "选择一个选项"

#: menu.sh:335
msgid "Add an addon"
msgstr "添加插件"

#: menu.sh:336
msgid "Delete addons"
msgstr "删除插件"

#: menu.sh:337
msgid "Show all addons"
msgstr "显示所有插件"

#: menu.sh:338
msgid "Upload a external addon"
msgstr "上传外部插件"

#: menu.sh:339 menu.sh:469 menu.sh:593 menu.sh:719 menu.sh:1060 menu.sh:1861
#: menu.sh:2039 menu.sh:2111
msgid "Exit"
msgstr "退出"

#: menu.sh:351 menu.sh:356 menu.sh:362 menu.sh:374 menu.sh:382 menu.sh:406
#: menu.sh:411 menu.sh:415 menu.sh:429 menu.sh:433 menu.sh:441 menu.sh:444
msgid "Addons"
msgstr "插件"

#: menu.sh:352
msgid "No available addons to add"
msgstr "没有可用的插件可添加"

#: menu.sh:357
msgid "Select an addon"
msgstr "选择插件"

#: menu.sh:363
msgid "Type a optional params to addon"
msgstr "输入插件的加载参数"

#: menu.sh:375
msgid "No user addons to remove"
msgstr "没有要删除的用户插件"

#: menu.sh:383
msgid "Select addon to remove"
msgstr "选择要删除的插件"

#: menu.sh:397
msgid ""
"Name with color \"\\Z4blue\\Zn\" have been added, with color \"black\" are "
"not added.\\n\\n"
msgstr "名称颜色为\"\\Z4蓝色\\Zn\"的为已添加, 颜色为\"黑色\"的为未添加.\\n\\n"

#: menu.sh:412 menu.sh:1383 menu.sh:1414 menu.sh:1447 menu.sh:1938
msgid "This feature is only available when accessed via web/ssh."
msgstr "此功能仅在通过 web/ssh 访问时可用."

#: menu.sh:416
msgid "Please upload the *.addons file."
msgstr "请上传 *.addons 文件."

#: menu.sh:430 menu.sh:569 menu.sh:1965 menu.sh:1979
msgid "Not a valid file, please try again!"
msgstr "不是有效的文件, 请重试!"

#: menu.sh:434
msgid "The addon already exists. Do you want to overwrite it?"
msgstr "该插件已存在, 是否覆盖?"

#: menu.sh:442
msgid "Addon '%s' added to loader, Please enable it in 'Add an addon' menu."
msgstr "插件 '%s' 已添加到引导中, 请在'添加插件' 菜单中开启."

#: menu.sh:445
msgid "File format not recognized!"
msgstr "文件格式无法识别!"

#: menu.sh:465
msgid "Show/Select modules"
msgstr "显示/选择模块"

#: menu.sh:466
msgid "Select loaded modules"
msgstr "选择已识别的模块"

#: menu.sh:467
msgid "Upload a external module"
msgstr "上传一个外部模块"

#: menu.sh:468
msgid "Priority use of official drivers:"
msgstr "优先使用官方模块:"

#: menu.sh:475 menu.sh:488 menu.sh:525 menu.sh:545 menu.sh:548 menu.sh:564
#: menu.sh:568
msgid "Modules"
msgstr "模块"

#: menu.sh:476
msgid "Reading modules ..."
msgstr "读取模块中 ..."

#: menu.sh:489
msgid "Select all"
msgstr "选择全部"

#: menu.sh:490
msgid "Deselect all"
msgstr "取消全选"

#: menu.sh:491
msgid "Select modules to include"
msgstr "选择要加载的插件"

#: menu.sh:526
msgid "Selecting loaded modules"
msgstr "选择已识别的模块"

#: menu.sh:540
msgid ""
"This function is experimental and dangerous. If you don't know much, please "
"exit.\\n"
msgstr "这个功能是实验性的, 很危险. 如果你知道的不多, 请退出. \\n"

#: menu.sh:541
msgid ""
"The imported .ko of this function will be implanted into the corresponding "
"arch's modules package, which will affect all models of the arch.\\n"
msgstr ""
"该功能导入 .ko 将被植入相应的架构的模块包中, 这将影响该架构的所有型号.\\n"

#: menu.sh:542
msgid ""
"This program will not determine the availability of imported modules or even "
"make type judgments, as please double check if it is correct.\\n"
msgstr ""
"该程序不会判断导入的驱动模块的可用性, 甚至不会做类型判断, 因从请你再三确认是"
"否正确.\\n"

#: menu.sh:543
msgid ""
"If you want to remove it, please go to the \"Update Menu\" -> \"Update "
"modules\" to forcibly update the modules. All imports will be reset.\\n"
msgstr ""
"如果您想删除它, 请转到 \"更新\"->\"更新模块\" 强制更新模块, 所有导入都将被重"
"置.\\n"

#: menu.sh:544
msgid "Do you want to continue?"
msgstr "是否继续?"

#: menu.sh:549
msgid "Please upload the *.ko file."
msgstr "请上传 *.ko 文件."

#: menu.sh:565
msgid "Module '%s' added to %s-%s"
msgstr "模块 '%s' 已添加到 %s-%s"

#: menu.sh:587
msgid "Add/Edit a cmdline item"
msgstr "添加/编辑 cmdline 参数"

#: menu.sh:588
msgid "Show/Delete cmdline items"
msgstr "显示/删除 cmdline 参数"

#: menu.sh:590
msgid "Define SN/MAC"
msgstr "自定义 SN/MAC"

#: menu.sh:592
msgid "Show model inherent cmdline"
msgstr "显示型号默认的 cmdline 参数"

#: menu.sh:601
msgid "Commonly used cmdlines:\\n"
msgstr "常用 cmdlines:\\n"

#: menu.sh:602
msgid ""
" * \\Z4disable_mtrr_trim=\\Zn\\n    disables kernel trim any uncacheable "
"memory out.\\n"
msgstr " * \\Z4disable_mtrr_trim=\\Zn\\n    禁用内核修剪任何不可缓存的内存.\\n"

#: menu.sh:603
msgid ""
" * \\Z4\"intel_idle.max_cstate\"=1\\Zn\\n    Set the maximum C-state depth "
"allowed by the intel_idle driver.\\n"
msgstr ""
" * \\Z4\"intel_idle.max_cstate\"=1\\Zn\\n    设置 intel_idle 驱动允许使用的最"
"大 C-state 深度.\\n"

#: menu.sh:604
msgid " * \\Z4SataPortMap=??\\Zn\\n    Sata Port Map.\\n"
msgstr " * \\Z4SataPortMap=??\\Zn\\n    Sata Port Map.\\n"

#: menu.sh:605
msgid ""
" * \\Z4DiskIdxMap=??\\Zn\\n    Disk Index Map, Modify disk name sequence.\\n"
msgstr " * \\Z4DiskIdxMap=??\\Zn\\n    Disk Index Map, 修改磁盘名称顺序.\\n"

#: menu.sh:606 menu.sh:732
msgid "\\nEnter the parameter name and value you need to add.\\n"
msgstr "\\n输入需要添加的参数名称和值.\\n"

#: menu.sh:609 menu.sh:618 menu.sh:642 menu.sh:650 menu.sh:666 menu.sh:676
#: menu.sh:705 menu.sh:735 menu.sh:744
msgid "Cmdline"
msgstr "Cmdline"

#: menu.sh:619 menu.sh:745
msgid "Invalid parameter name, retry?"
msgstr "无效参数名称, 重试?"

#: menu.sh:643
msgid "No user cmdline to remove"
msgstr "没有用户参数被删除"

#: menu.sh:651
msgid "Select cmdline to remove"
msgstr "选择要删除的参数"

#: menu.sh:662
msgid "Note: (MAC will not be set to NIC)"
msgstr "注意: (MAC 不会设置到 NIC)"

#: menu.sh:667
msgid "Random"
msgstr "随机"

#: menu.sh:677
msgid "Invalid SN/MAC, retry?"
msgstr "无效 SN/MAC, 重试?"

#: menu.sh:717
msgid "Add/edit a synoinfo item"
msgstr "添加/编辑 Synoinfo 参数"

#: menu.sh:718
msgid "Show/Delete synoinfo items"
msgstr "显示/删除 Synoinfo 参数"

#: menu.sh:727
msgid "Commonly used synoinfo:\\n"
msgstr "常用 synoinfo:\\n"

#: menu.sh:728
msgid " * \\Z4maxdisks=??\\Zn\\n    Maximum number of disks supported.\\n"
msgstr " * \\Z4maxdisks=??\\Zn\\n    最大硬盘数.\\n"

#: menu.sh:729
msgid " * \\Z4internalportcfg=0x????\\Zn\\n    Internal(sata) disks mask.\\n"
msgstr " * \\Z4esataportcfg=0x????\\Zn\\n    Internal(sata) 磁盘掩码.\\n"

#: menu.sh:730
msgid " * \\Z4esataportcfg=0x????\\Zn\\n    Esata disks mask.\\n"
msgstr " * \\Z4esataportcfg=0x????\\Zn\\n    Esata 磁盘掩码.\\n"

#: menu.sh:731
msgid " * \\Z4usbportcfg=0x????\\Zn\\n    USB disks mask.\\n"
msgstr " * \\Z4usbportcfg=0x????\\Zn\\n    USB 磁盘掩码.\\n"

#: menu.sh:769 menu.sh:777
msgid "Synoinfo"
msgstr "Synoinfo"

#: menu.sh:770
msgid "No synoinfo entries to remove"
msgstr "没有 Synoinfo 参数被删除"

#: menu.sh:778
msgid "Select synoinfo entry to remove"
msgstr "选择要删除的参数"

#: menu.sh:811
msgid "%s cached."
msgstr "%s 已缓存."

#: menu.sh:815
msgid "Cleaning cache ..."
msgstr "清除缓存 ..."

#: menu.sh:823
msgid ""
"Based on the current network situation, switch to %s mirror to downloading."
msgstr "根据当前的网络状况, 已切换到 %s 镜像服务器进行下载."

#: menu.sh:827
msgid "Downloading %s ..."
msgstr "下载 %s 中 ..."

#: menu.sh:838 menu.sh:899
msgid "Check internet or cache disk space.\\nError: %d:%d"
msgstr "请检查网络连接或磁盘空间.\\nError: %d:%d"

#: menu.sh:844
msgid "Checking hash of %s: "
msgstr "检查 %s 的 hash: "

#: menu.sh:847
msgid ""
"md5 hash of pat not match, Please reget pat data from the version menu and "
"try again!"
msgstr "pat 的 md5 Hash 不匹配, 请在版本菜单中重新获取 pat 数据后重试!"

#: menu.sh:850 menu.sh:950 menu.sh:960
msgid "OK"
msgstr "OK"

#: menu.sh:854
msgid "Disassembling %s: "
msgstr "解压缩 %s: "

#: menu.sh:859
msgid "Uncompressed tar"
msgstr "未压缩 tar"

#: menu.sh:863
msgid "Compressed tar"
msgstr "已压缩 tar"

#: menu.sh:867
msgid "Encrypted"
msgstr "已加密"

#: menu.sh:871
msgid ""
"Could not determine if pat file is encrypted or not, maybe corrupted, try "
"again!"
msgstr "无法确定 pat 文件是否加密, 可能已损坏, 请重试!"

#: menu.sh:881
msgid "Extractor cached."
msgstr "已存在解密程序."

#: menu.sh:888
msgid "Downloading old pat to extract synology .pat extractor..."
msgstr "下载旧 pat, 提取 .pat 解密程序中..."

#: menu.sh:928 menu.sh:931
msgid "Extracting..."
msgstr "解压中..."

#: menu.sh:942
msgid "pat Invalid, try again!"
msgstr "无效的 pat, 请重试!"

#: menu.sh:945
msgid "Setting hash: "
msgstr "设置 hash: "

#: menu.sh:952
msgid "Copying files: "
msgstr "拷贝文件: "

#: menu.sh:977
msgid "Addon %s not found!"
msgstr "插件 %s 未找到!"

#: menu.sh:1006 menu.sh:2090
msgid "Cleaning ..."
msgstr "清除中 ..."

#: menu.sh:1008
msgid "Ready!"
msgstr "已就绪!"

#: menu.sh:1012 menu.sh:2042
msgid "Main menu"
msgstr "主菜单"

#: menu.sh:1013
msgid "Making ..."
msgstr "编译中 ..."

#: menu.sh:1014
msgid "Error"
msgstr "错误"

#: menu.sh:1026
msgid "Switch LKM version:"
msgstr "选择 LKM 版本:"

#: menu.sh:1027
msgid "HDD sort:"
msgstr "HDD 排序:"

#: menu.sh:1030
msgid "Switch direct boot:"
msgstr "切换直接启动:"

#: menu.sh:1032
msgid "Timeout of get ip in boot:"
msgstr "启动时获取 IP 的超时时间:"

#: menu.sh:1033
msgid "Timeout of boot wait:"
msgstr "启动超时时间:"

#: menu.sh:1034
msgid "kernel switching method:"
msgstr "内核切换的方式:"

#: menu.sh:1036
msgid "Reboot on kernel panic:"
msgstr "内核恐慌时重新启动:"

#: menu.sh:1038
msgid "Set static IP"
msgstr "设置静态 IP"

#: menu.sh:1039
msgid "Edit user config file manually"
msgstr "手动编辑用户配置文件"

#: menu.sh:1040
msgid "Edit grub.cfg file manually"
msgstr "手动编辑 grub.cfg 文件"

#: menu.sh:1041
msgid "Try to recovery a DSM installed system"
msgstr "尝试恢复已安装 DSM 的系统"

#: menu.sh:1042
msgid "Show SATA(s) # ports and drives"
msgstr "显示 SATA(s) # 端口和驱动器"

#: menu.sh:1044
msgid "show/modify the current pat data"
msgstr "显示/修改当前 pat 下载链接"

#: menu.sh:1046
msgid "Allow downgrade installation"
msgstr "允许降级安装"

#: menu.sh:1047
msgid "Format disk(s) # Without loader disk"
msgstr "格式化磁盘(s) # 不含启动盘"

#: menu.sh:1048
msgid "Reset DSM system password"
msgstr "重置 DSM 系统密码"

#: menu.sh:1049
msgid "Save modifications of '/opt/rr'"
msgstr "保存'/opt/rr'的修改"

#: menu.sh:1051
msgid "Custom dts file # Need rebuild"
msgstr "自定义 dts 文件 # 需要重新编译"

#: menu.sh:1054
msgid "Backup bootloader disk # test"
msgstr "备份启动盘 # 测试"

#: menu.sh:1055
msgid "Restore bootloader disk # test"
msgstr "恢复启动盘 # 测试"

#: menu.sh:1057
msgid "Report bugs to the author"
msgstr "向作者报告错误"

#: menu.sh:1058
msgid "Install development tools"
msgstr "安装开发者工具"

#: menu.sh:1059
msgid "Show QR logo:"
msgstr "显示 QR logo:"

#: menu.sh:1062 menu.sh:1086 menu.sh:1098 menu.sh:1118 menu.sh:1141
#: menu.sh:1165 menu.sh:1229 menu.sh:1236 menu.sh:1254 menu.sh:1267
#: menu.sh:1270 menu.sh:1280 menu.sh:1281 menu.sh:1286 menu.sh:1290
#: menu.sh:1301 menu.sh:1303 menu.sh:1320 menu.sh:1325 menu.sh:1333
#: menu.sh:1339 menu.sh:1352 menu.sh:1355 menu.sh:1359 menu.sh:1362
#: menu.sh:1377 menu.sh:1382 menu.sh:1386 menu.sh:1401 menu.sh:1406
#: menu.sh:1413 menu.sh:1417 menu.sh:1420 menu.sh:1425 menu.sh:1435
#: menu.sh:1440 menu.sh:1446 menu.sh:1450 menu.sh:1467 menu.sh:1470
#: menu.sh:1476 menu.sh:1484 menu.sh:1498 menu.sh:1502 menu.sh:1512
#: menu.sh:1517 menu.sh:1524 menu.sh:1526
msgid "Advanced"
msgstr "高级"

#: menu.sh:1063
msgid "Advanced option"
msgstr "高级设置"

#: menu.sh:1087 menu.sh:1099 menu.sh:1119
msgid "Choose a time(seconds)"
msgstr "选择一个时间(秒)"

#: menu.sh:1129
msgid "Temporary IP: (UI will not refresh)"
msgstr "临时 IP: (UI 不会刷新)"

#: menu.sh:1166
msgid "Setting IP ..."
msgstr "设置 IP.."

#: menu.sh:1227
msgid "\\nTotal of ports: %s\\n"
msgstr "\\n端口总数: %s\\n"

#: menu.sh:1228
msgid ""
"\\nPorts with color \\Z1red\\Zn as DUMMY, color \\Z2\\Zbgreen\\Zn has drive "
"connected."
msgstr "\\n\\Z1红色\\Zn 为模拟端口, \\Z2\\Zb绿色\\Zn 为已驱动的物理端口."

#: menu.sh:1235
msgid "pat: (editable)"
msgstr "pat: (可编辑)"

#: menu.sh:1251
msgid ""
"This feature will allow you to downgrade the installation by removing the "
"VERSION file from the first partition of all disks.\\n"
msgstr "此功能通过删除所有磁盘的第一个分区的 VERSION 文件来允许你降级安装.\\n"

#: menu.sh:1252
msgid "Therefore, please insert all disks before continuing.\\n"
msgstr "因此, 请插入所有磁盘后再进行操作.\\n"

#: menu.sh:1253 menu.sh:1287
msgid ""
"Warning:\\nThis operation is irreversible. Please backup important data. Do "
"you want to continue?"
msgstr "警告:\\n该操作不可逆, 请提前备份重要数据. 是否继续?"

#: menu.sh:1268
msgid "Removing ..."
msgstr "删除中..."

#: menu.sh:1269
msgid "Remove VERSION file for all disks completed."
msgstr "已移除所有磁盘的 VERSION 文件."

#: menu.sh:1291
msgid ""
"Warning:\\nThe current hds is in raid, do you still want to format them?"
msgstr "警告:\\n当前的硬盘处于 raid 中，是否仍要格式化?"

#: menu.sh:1302
msgid "Formatting ..."
msgstr "格式化中..."

#: menu.sh:1304
msgid "Formatting is complete."
msgstr "格式化完成."

#: menu.sh:1321
msgid "The installed Syno system not found in the currently inserted disks!"
msgstr "未在当前插入的硬盘中找到已安装的 syno 系统!"

#: menu.sh:1326
msgid "Choose a user name"
msgstr "选择一个用户"

#: menu.sh:1334
msgid "Type a new password for user '%s'"
msgstr "输入用户 '%s' 的新密码"

#: menu.sh:1340
msgid "Invalid password"
msgstr "无效密码"

#: menu.sh:1353
msgid "Resetting ..."
msgstr "重置中 ..."

#: menu.sh:1356
msgid "Password reset completed."
msgstr "重置密码完成."

#: menu.sh:1360 menu.sh:1418 menu.sh:1471
msgid ""
"Warning:\\nDo not terminate midway, otherwise it may cause damage to the RR. "
"Do you want to continue?"
msgstr "警告:\\n请不要中途停止, 否则将导致 RR 引导损毁, 是否继续?"

#: menu.sh:1363
msgid "Saving ..."
msgstr "保存中..."

#: menu.sh:1378
msgid "Save is complete."
msgstr "保存完成."

#: menu.sh:1387
msgid ""
"Currently, only dts format files are supported. Please prepare and click to "
"confirm uploading.\\n(saved in /mnt/p3/users/)"
msgstr ""
"目前, 只支持 dts 格式的文件, 请准备并点击确认上传.\\n(保存于 /mnt/p3/users/ "
"中)"

#: menu.sh:1402
msgid "Not a valid dts file, please try again!"
msgstr "dts 文件无效, 请重试!"

#: menu.sh:1407
msgid "A valid dts file, Automatically import at compile time."
msgstr "dts 文件有效, 将在编译时自动导入."

#: menu.sh:1421
msgid "Backuping..."
msgstr "备份中..."

#: menu.sh:1426
msgid ""
"Failed to generate backup. There may be insufficient memory. Please clear "
"the cache and try again!"
msgstr "生成备份失败, 可能内存不足, 请清除缓存重试!"

#: menu.sh:1433
msgid "Click on the address above to download."
msgstr "点击上面的地址下载."

#: menu.sh:1434
msgid ""
"Please confirm the completion of the download before closing this window."
msgstr "请确认下载完成再关闭此窗口."

#: menu.sh:1441
msgid "backup is complete."
msgstr "备份完成."

#: menu.sh:1451
msgid ""
"Please upload the backup file.\\nCurrently, zip(github) and img.gz(backup) "
"compressed file formats are supported."
msgstr "请上传备份的文件\\n当前支持 zip(github) 和 img.gz(backup) 格式."

#: menu.sh:1468
msgid "Not a valid .zip/.img.gz file, please try again!"
msgstr "不是有效的 .zip/.img.gz 文件, 请重试!"

#: menu.sh:1477
msgid "Writing..."
msgstr "写入中..."

#: menu.sh:1485
msgid "Restore bootloader disk with success to %s!\\nReboot?"
msgstr "成功恢复启动盘到 %s!\\n重启?"

#: menu.sh:1499
msgid ""
"Please via %s to download the logs,\\nAnd go to github to create an issue "
"and upload the logs."
msgstr "请通过 %s 下载日志 logs,\\n并前往 github 创建问题并上传日志 logs."

#: menu.sh:1503
msgid "Please go to github to create an issue and upload the logs."
msgstr "请前往 github 创建问题并上传日志 logs."

#: menu.sh:1507
msgid "\\Z1No logs found!\\Zn\\n\\n"
msgstr "\\Z1日志 logs 未找到!\\Zn\\n\\n"

#: menu.sh:1508
msgid "Please do as follows:\\n"
msgstr "请按如下操作:\\n"

#: menu.sh:1509
msgid " 1. Add dbgutils in addons and rebuild.\\n"
msgstr " 1. 在插件中添加 dbgutils 并重新编译.\\n"

#: menu.sh:1510
msgid " 2. Wait 10 minutes after booting.\\n"
msgstr " 2. 启动后等待10分钟.\\n"

#: menu.sh:1511
msgid " 3. Reboot into RR and go to this option.\\n"
msgstr " 3. 重启到 RR 并回到该选项.\\n"

#: menu.sh:1518
msgid ""
"This option only installs opkg package management, allowing you to install "
"more tools for use and debugging. Do you want to continue?"
msgstr ""
"该选项仅安装 opkg 包管理工具, 使你能够安装更多的工具以供使用和调试, 是否继续?"

#: menu.sh:1525
msgid "opkg installing ..."
msgstr "opkg 安装中 ..."

#: menu.sh:1527
msgid ""
"opkg install is complete. Please reconnect to SSH/web, or execute 'source ~/."
"bashrc'"
msgstr "opkg 安装完成. 请重新链接 SSH/web, 或者执行 'source ~/.bashrc'"

#: menu.sh:1542 menu.sh:1577 menu.sh:1584
msgid "Try recovery DSM"
msgstr "尝试恢复 DSM 系统"

#: menu.sh:1543
msgid "Trying to recovery a DSM installed system ..."
msgstr "尝试恢复已安装的 DSM 系统中 ..."

#: menu.sh:1571
msgid "Found a installation:\\nModel: %s\\nProductversion: %s"
msgstr "找到已安装:\\n型号:  %s\\n版本: %s"

#: menu.sh:1575
msgid "\\nSerial: %s"
msgstr "\\nSN: %s"

#: menu.sh:1585
msgid "Unfortunately I couldn't mount the DSM partition!"
msgstr "很遗憾, 我无法挂载 DSM 分区!"

#: menu.sh:1593 menu.sh:1599 menu.sh:1622
msgid "Edit with caution"
msgstr "请谨慎编辑"

#: menu.sh:1633
msgid "Alert"
msgstr "警告"

#: menu.sh:1634
msgid "Config changed, would you like to rebuild the loader?"
msgstr "配置已更改, 是否重新编译引导?"

#: menu.sh:1646 menu.sh:2032
msgid "Choose a language"
msgstr "选择语言"

#: menu.sh:1660
msgid "Choose a layout"
msgstr "选择布局"

#: menu.sh:1672
msgid "Choice a keymap"
msgstr "选择键盘映射"

#: menu.sh:1691 menu.sh:1746 menu.sh:1797 menu.sh:1869 menu.sh:1872
#: menu.sh:1875 menu.sh:1878 menu.sh:1885 menu.sh:1892 menu.sh:1899
#: menu.sh:1906
msgid "Update %s"
msgstr "更新 %s"

#: menu.sh:1694
msgid "Checking last version ..."
msgstr "检测新版本中 ..."

#: menu.sh:1707 menu.sh:1710
msgid "Error checking new version.\\nError: TAG is %s"
msgstr "检测新版本错误.\\nError: TAG is %s"

#: menu.sh:1717
msgid "No new version."
msgstr "没有新版本."

#: menu.sh:1721
msgid "No new version. Actual version is %s\\nForce update?"
msgstr "没有新版本. 实际版本为 %s\\n强制更新?"

#: menu.sh:1730
msgid "Downloading ..."
msgstr "下载中 ..."

#: menu.sh:1734 menu.sh:1737
msgid "Error downloading new version.\\nError: %d:%d"
msgstr "下载新版本错误.\\nError: %d:%d"

#: menu.sh:1748 menu.sh:1799
msgid "Extracting last version"
msgstr "解压新版本"

#: menu.sh:1752
msgid "Error extracting update file"
msgstr "更新文件解压错误"

#: menu.sh:1759
msgid "Checksum do not match!"
msgstr "Checksum 不匹配!"

#: menu.sh:1768
msgid ""
"The current version does not support upgrading to the latest update.zip. "
"Please remake the bootloader disk!"
msgstr "当前版本不支持最新的 update.zip 升级, 请重新制作引导盘!"

#: menu.sh:1773
msgid "Installing new files ..."
msgstr "安装更新中 ..."

#: menu.sh:1790
msgid "RR updated with success to %s!\\nReboot?"
msgstr "RR 更新成功 %s!\\n重启?"

#: menu.sh:1805
msgid "Installing new %s ..."
msgstr "安装新 %s 中 ..."

#: menu.sh:1834 menu.sh:1837
msgid "%s updated with success!"
msgstr "%s 更新成功!"

#: menu.sh:1851
msgid "Update all"
msgstr "更新全部"

#: menu.sh:1852
msgid "Update RR"
msgstr "更新 RR"

#: menu.sh:1853
msgid "Update addons"
msgstr "更新插件"

#: menu.sh:1854
msgid "Update modules"
msgstr "更新模块"

#: menu.sh:1855
msgid "Update LKMs"
msgstr "更新LKMs"

#: menu.sh:1857
msgid "Set proxy server"
msgstr "设置代理"

#: menu.sh:1859
msgid "Local upload"
msgstr "本地上传"

#: menu.sh:1860
msgid "Pre Release:"
msgstr "预发布:"

#: menu.sh:1869 menu.sh:1892
msgid "addons"
msgstr "插件"

#: menu.sh:1872 menu.sh:1899
msgid "modules"
msgstr "模块"

#: menu.sh:1875 menu.sh:1906
msgid "LKMs"
msgstr "LKMs"

#: menu.sh:1878 menu.sh:1885
msgid "RR"
msgstr "RR"

#: menu.sh:1915 menu.sh:1926 menu.sh:1937 menu.sh:1947 menu.sh:1964
#: menu.sh:1978
msgid "Update"
msgstr "更新"

#: menu.sh:1916
msgid "Please enter a proxy server url"
msgstr "请输入代理服务器 url"

#: menu.sh:1927
msgid "Invalid proxy server url, continue?"
msgstr "无效的代理服务器 url, 是否继续?"

#: menu.sh:1942
msgid ""
"Please keep the attachment name consistent with the attachment name on "
"Github.\\n"
msgstr "请保持附件名称与 github 上附件名称一致.\\n"

#: menu.sh:1943
msgid "Upload update.zip will update RR.\\n"
msgstr "上传 update.zip 将更新 RR.\\n"

#: menu.sh:1944
msgid "Upload addons.zip will update Addons.\\n"
msgstr "上传 addons.zip 将更新 插件.\\n"

#: menu.sh:1945
msgid "Upload modules.zip will update Modules.\\n"
msgstr "上传 modules.zip 将更新 模块.\\n"

#: menu.sh:1946
msgid "Upload rp-lkms.zip will update LKMs.\\n"
msgstr "上传 rp-lkms.zip 将更新 LKMs.\\n"

#: menu.sh:1995
msgid "This person is very lazy and hasn't written anything."
msgstr "这个人很懒, 什么也没有写."

#: menu.sh:1996
msgid "Edit"
msgstr "编辑"

#: menu.sh:2013
msgid "Choose a model"
msgstr "选择型号"

#: menu.sh:2015
msgid "Choose a version"
msgstr "选择版本"

#: menu.sh:2017
msgid "Addons menu"
msgstr "插件"

#: menu.sh:2018
msgid "Modules menu"
msgstr "模块"

#: menu.sh:2019
msgid "Cmdline menu"
msgstr "设置 Cmdline"

#: menu.sh:2020
msgid "Synoinfo menu"
msgstr "设置 Synoinfo"

#: menu.sh:2023
msgid "Advanced menu"
msgstr "高级设置"

#: menu.sh:2026
msgid "Build the loader"
msgstr "编译引导"

#: menu.sh:2030
msgid "Boot the loader"
msgstr "启动"

#: menu.sh:2033
msgid "Choose a keymap"
msgstr "选择键盘"

#: menu.sh:2035
msgid "Clean disk cache"
msgstr "清除磁盘缓存"

#: menu.sh:2037
msgid "Update menu"
msgstr "更新"

#: menu.sh:2038
msgid "Notepad"
msgstr "备注"

#: menu.sh:2106
msgid "Choose a action"
msgstr "选择动作"

#: menu.sh:2107
msgid "Poweroff"
msgstr "关机"

#: menu.sh:2108
msgid "Reboot"
msgstr "重启"

#: menu.sh:2109
msgid "Reboot to RR"
msgstr "重启到 RR"

#: menu.sh:2110
msgid "Back to shell"
msgstr "退出到 shell"

#: menu.sh:2136
msgid "Call \\033[1;32mmenu.sh\\033[0m to return to menu"
msgstr "执行 \\033[1;32mmenu.sh\\033[0m 重新进入设置菜单"

#~ msgid "Show all available addons"
#~ msgstr "显示所有可用插件"

#~ msgid "Show user added cmdline"
#~ msgstr "显示用户添加的 cmdline 参数"

#~ msgid "Type a name of cmdline"
#~ msgstr "输入参数的名称"

#~ msgid "Type a value of '%s' cmdline"
#~ msgstr "输入 '%s' 参数的值"

#~ msgid "Show synoinfo entries"
#~ msgstr "显示 Synoinfo 参数"

#~ msgid "Type a name of synoinfo entry"
#~ msgstr "输入参数的名称"

#~ msgid "Type a value of '%s' synoinfo entry"
#~ msgstr "输入 '%s' 参数的值"

#~ msgid ""
#~ "This version only support usb startup, Please select another version or "
#~ "switch the startup mode."
#~ msgstr "该版本仅支持 usb 启动, 请选择其他版本或者切换启动模式."